E. Tanzli et al., “Improved cell growth on additively manufactured Ti64 substrates with varying porosity and nanofibrous coating,” Heliyon, vol. 10, no. 3, 2024.

M. Riechmann, A. Kirsch, M. König, and J. Rexilius, “Virtual Borders in 3D: Defining a Drone’s Movement Space Using Augmented Reality,” presented at the IEEE International Conference on Robotics and Automation, Yokohama, 2024.

N. S. Vetter, D. Bruland, M. Voß, N. Seidl, and Ä.-D. Latteck, “Gesundheitskompetenz von Menschen mit sog. geistiger Behinderung. Einsatz zielgruppenorientierter Kompetenzvideos ,” presented at the 22. Deutscher Kongress für Versorgungsforschung, Berlin, 2023.

M. Riechmann, A. Kirsch, and M. König, “Augmented Reality for Interactive Path Planning in 3D,” in 2023 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), Sydney, Australia, 2023, pp. 561–566.

A. Ehrmann, Ed.,  3D Printing of MEMS Technology. Basel: MDPI, 2023.

S. Cakar and A. Ehrmann, “Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites,” Tekstilec, vol. 66, pp. 211–217, 2023.

D. Wójcik et al., “Experimental Verification of the Shielding Properties of Selected Textile Materials in the X Frequency Band,” Applied Sciences, vol. 13, no. 17, 2023.

B. Stecker and H. Brandt-Pook, “Application of Object Detection Models for the Detection of Kitchen Furniture - A Comparison,” in Artificial Intelligence and Soft Computing. 22nd International Conference, ICAISC 2023, Zakopane, Poland, June 18–22, 2023, Proceedings, Part II, 2023, pp. 91–101.

T. Kozior and A. Ehrmann, “First Proof-of-Principle of PolyJet 3D Printing on Textile Fabrics,” Polymers, vol. 15, no. 17, 2023.

G. Erdem, T. Grothe, and A. Ehrmann, “Adhesion of new thermoplastic materials printed on textile fabrics,” Tekstilec, vol. 66, no. 1, pp. 57–63, 2023.

T. Blachowicz, G. Ehrmann, and A. Ehrmann, “Recent Developments in Additive Manufacturing of Conductive Polymer Composites,” Macromolecular Materials and Engineering, 2023.

M.-S. Özev and A. Ehrmann, “Sandwiching textiles with FDM Printing,” Communications in Development and Assembling of Textile Products, vol. 4, no. 1, pp. 88–94, 2023.

E. Werner, U. Güth, B. Brockhagen, C. Döpke, and A. Ehrmann, “Examination of Polymer Blends by AFM Phase Images,” Technologies, vol. 11, no. 2, 2023.

T. Wächter, J. Rexilius, and M. König, “Escape Route Strategies in Complex Emergency Situations using Deep Reinforcement Learning,” in 2023 19th International Conference on Intelligent Environments (IE), Uniciti, Mauritius, 2023, pp. 1–8.

N. Panneke and A. Ehrmann, “Stab-Resistant Polymers—Recent Developments in Materials and Structures,” Polymers, vol. 15, no. 4, 2023.

B. Ekinci and A. Ehrmann, “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing,” in ASEC 2022, 2023, vol. 31, no. 1, p. 40.

C. Steinmeier, D. Becking, and M. Kanders, “The Perfect Musical Instrument Does Not Exist,” in The15th International Conference on PErvasive Technologies Related to Assistive Environments, Corfu Greece, 2022, pp. 507–513.

G. Ehrmann, T. Blachowicz, and A. Ehrmann, “Magnetic 3D-Printed Composites—Production and Applications,” Polymers, vol. 14, no. 18, 2022.

A. Ehrmann, “D/4D Printing Application for Shape Memory Materials,” Materials, vol. 15, no. 17, 2022.

J. L. Storck et al., “Investigation of Low-Cost FDM-Printed Polymers for Elevated-Temperature Applications,” Polymers, vol. 14, no. 14, 2022.

L. Bauer et al., “Electrospinning for the Modification of 3D Objects for the Potential Use in Tissue Engineering,” Technologies, vol. 10, no. 3, 2022.

J. L. Storck, G. Ehrmann, J. Uthoff, E. Diestelhorst, T. Blachowicz, and A. Ehrmann, “Investigating inexpensive polymeric 3D printed materials under extreme thermal conditions,” Materials Futures, vol. 1, no. 1, 2022.

F. Karau and M. Leuer, “Model Predicitve Position Control of Electrical Drives on an Industrial PC,” in 2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe), Hannover, Germany, 2022.

M. Riechmann, M. König, and J. Rexilius, “D-Multi-Layer-Multi-Representation-Maps for Short- and Long-term Mapping and Navigation,” presented at the The 27th International Conference on Automation and Computing (IC), Bristol.

M. Othman and C. Stöcker, “Aufbau virtueller Versuchsanlagen und deren Nutzung in Lehrveranstaltungen zur Automatisierungstechnik,” in Wissenstransfer im Spannungsfeld von Autonomisierung und Fachkräftemangel, Pforzheim, 2022.

M. Baez Gonzalez et al., “Exploring challenges for Conversational Web Browsing with Blind and Visually Impaired Users,” in CHI Conference on Human Factors in Computing Systems Extended Abstracts, New Orleans LA USA, 2022, pp. 1–7.

A. Bünte, A. Hald, and A. Kirsch, “Drive Level Parameter Identification of an Induction Motor,” presented at the 2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe), Hannover, 2022.

F. Deckers, K. Rasim, and C. Schröder, “Molecular dynamics simulation of polypropylene: diffusion and sorption of O, O2, , O2 and determination of the glass transition temperature,” Journal of Polymer Research, vol. 29, no. 11, 2022.

A. Krümmel, I. Laiker, K. J. Wrona, L. Aschentrup, and C. Dockweiler, “Akzeptanz und Nutzungsbedingungen digitaler Interventionen zur Distressprävention bei Studierenden,” Prävention und Gesundheitsförderung, 2022.

M. Ayvali, I. Wickenkamp, and A. Ehrmann, “Design, Construction and Tests of a Low-Cost Myoelectric Thumb,” Technologies, vol. 9, no. 3, 2021.

T. Kampe and B. Wach, “Entrepreneurship Education in dualen Studiengängen - Zielsetzungen, Praxisperspektiven und Studienformate,” in Virtuelle Konferenz eZukunft Duales Studium“, Hochschule Osnabrück, Campus Lingen, 22./23.04., Hochschule Osnabrück, Campus Lingen, 2021.

T. Grothe, Potential applications of stereolithographic 3D printing technique addressing biomechatronic challenges. 2021.

J. Müller et al., “The Art of Orientation - How not to be Lost in 3D,” in Mensch und Computer 2021, Ingolstadt Germany, 2021, pp. 426–431.

C. Dresch et al., “Barrieren bei der Antragstellung zur onkologischen Rehabilitation: Ergebnisse einer qualitativen Expertenbefragung,” Die Rehabilitation, vol. 60, no. 04, pp. 235–242, 2021.

T. Süße, M. Kobert, and C. Kries, “Antecedents of Constructive Human-AI Collaboration: An Exploration of Human Actors’ Key Competencies,” in Smart and Sustainable Collaborative Networks 4.0. 22nd IFIP WG 5.5 Working Conference on Virtual Enterprises, PRO-VE 2021, Saint-Étienne, France, November 22–24, 2021, Proceedings, L. M. Camarinha-Matos, X. Boucher, and H. Afsarmanesh, Eds. Cham: Springer International Publishing, 2021, pp. 113–124.

A. Nowak et al., “Clinical ethics case consultation in a university department of cardiology and intensive care: a descriptive evaluation of consultation protocols,” BMC Medical Ethics, vol. 22, no. 1, 2021.

S. Sölmann et al., “Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment,” AIMS Bioengineering, vol. 8, no. 1, pp. 25–35, 2021.

T. Blachowicz, G. Ehrmann, and A. Ehrmann, “Metal Additive Manufacturing for Satellites and Rockets,” Applied Sciences, vol. 11, no. 24, 2021.

G. Ehrmann and A. Ehrmann, “Shape memory textiles – technological background and possible applications,” Communications in Development and Assembling of Textile Products, vol. 2, no. 2, pp. 162–172, 2021.

P. Steinmetz and A. Ehrmann, “Influence of elastic 3D printed polymers on the mechanical properties and tribology of textile fabrics,” Communications in Development and Assembling of Textile Products, vol. 2, no. 2, pp. 115–122, 2021.

G. Ehrmann and A. Ehrmann, “Formgedächtnispolymere – vom 3D-Druck zur Polymerchemie,” in PhyDid B - Didaktik der Physik, virtuell, 2021, vol. 2021.

D. Koske and A. Ehrmann, “Advanced Infill Designs for 3D Printed Shape-Memory Components,” Micromachines, vol. 12, no. 10, 2021.

G. Ehrmann, B. Brockhagen, and A. Ehrmann, “Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments,” Technologies, vol. 9, no. 4, 2021.

T. Blachowicz, G. Ehrmann, and A. Ehrmann, “Optical elements from 3D printed polymers,” e-Polymers, vol. 21, no. 1, pp. 549–565, 2021.

G. Ehrmann and A. Ehrmann, “Investigation of the Shape-Memory Properties of 3D Printed PLA Structures with Different Infills,” Polymers, vol. 13, no. 1, 2021.

J. Störmer, D. Görmer, and A. Ehrmann, “Influence of washing on the adhesion between 3D-printed TPU and woven fabrics,” Communications in Development and Assembling of Textile Products, vol. 2, no. 1, pp. 34–39, 2021.

G. Ehrmann and A. Ehrmann, “D printing of shape memory polymers                  ,” Journal of Applied Polymer Science, vol. 138, no. 34, 2021.

D. Koske and A. Ehrmann, “Infill Designs for 3D-Printed Shape-Memory Objects,” Technologies, vol. 9, no. 2, 2021.

G. Ehrmann and A. Ehrmann, “Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree,” Polymers, vol. 13, no. 8, 2021.

A. Chalgham, A. Ehrmann, and I. Wickenkamp, “Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment,” Polymers, vol. 13, no. 8, 2021.

T. Blachowicz, K. Domino, M. Koruszowic, J. Grzybowski, T. Böhm, and A. Ehrmann, “Statistical Analysis of Nanofiber Mat AFM Images by Gray-Scale-Resolved Hurst Exponent Distributions,” Applied Sciences, vol. 11, no. 5, 2021.

M. Wortmann, N. Frese, J. Brikmann, A. Ehrmann, E. Moritzer, and B. Hüsgen, “Silicone Mold Accuracy in Polyurethane Vacuum Casting,” Macromolecular Symposia, vol. 395, no. 1, 2021.

S. Cakar and A. Ehrmann, “D Printing with Flexible Materials – Mechanical Properties and Material Fatigue,” Macromolecular Symposia, vol. 395, no. 1, 2021.

M. Ayvali, L. Bussieweke, G. Druzinin, M. Korkmaz, and A. Ehrmann, “D printing on warp-knitted fabrics,” IOP Conference Series: Materials Science and Engineering, vol. 1031, no. 1, 2021.

A. Jaksties, J.-H. Sünderkamp, J. H. Plümer, and K. Müller, “Lost in 3D,” in Proceedings of the Conference on Mensch und Computer, Magdeburg Germany, 2020, pp. 133–136.

T. Süße, “Digital Citizenship Behavior in Organization as Indicator for Actors’ Co-creative Problem-Solving in Ecosystem-Oriented Work Environments,” in Human Interaction and Emerging Technologies. Proceedings of the 1st International Conference on Human Interaction and Emerging Technologies (IHIET 2019), August 22-24, 2019, Nice, France, T. Ahram, R. Taiar, S. Colson, and A. Choplin, Eds. Cham: Springer International Publishing, 2020, pp. 675–681.

M. Al Mamoori, C. Schröder, L. Keller, M. Huth, and J. Müller, “First-order reversal curves (FORCs) of nano-engineered 3D Co-Fe structures,” AIP Advances, vol. 10, no. 1, 2020.

G. Ehrmann and A. Ehrmann, “Shape-memory properties of 3D printed PLA structures,” in The First International Conference on “Green” Polymer Materials, 2020.

G. Ehrmann and A. Ehrmann, “Shape-Memory Properties of 3D Printed PLA Structures,” in Proceedings of The First International Conference on “Green” Polymer Materials 2020, Sciforum.net, 2020, p. 7198.

T. Spahiu, E. Piperi, A. Ehrmann, H. A. Almeida, R. M. T. Ascenso, and L. C. Vitorino, “D Printing: An Innovative Technology for Customised Shoe Manufacturing,” in Progress in Digital and Physical Manufacturing, H. Almeida and J. Vasco, Eds. Springer, 2020, pp. 171–180.

T. Spahiu, E. Piperi, A. Ehrmann, E. Shehi, and D. Rama, “D Printed Geometries on Textile Fabric for Garment Production,” in Progress in Digital and Physical Manufacturing, Springer, 2020, pp. 271–276.

S. Schiffel, F. Fehring, and G. Behrens, “Classification of Building Parts in Real City Point Clouds,” in 36th European Photovoltaic Solar Energy Conference and Exhibition, Marseille, France, 2019.

M. Al Mamoori, L. Keller, M. Huth, C. Schröder, and J. Müller, “Magnetization Reversal of Individual Three Dimensional (3D) Fe-Co Nanostructures,” in Verhandlungen der Deutschen Physikalischen Gesellschaft, Regensburg, 2019.

J. Müller, M. Al Mamoori, L. Keller, M. Huth, and C. Schröder, “Micro-Hall Magnetometry of FEBID-fabricated 3D magnetic nano-architectures,” in Verhandlungen der Deutschen Physikalischen Gesellschaft, Regensburg, 2019.

T. Kozior, M. Trabelsi, A. Mamun, L. Sabantina, and A. Ehrmann, “Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing ,” Polymers, vol. 11, no. 10, 2019.

L. Keller et al., “Direct-write of free-form building blocks for artificial magnetic 3D lattices,” Scientific Reports, vol. 8, no. 1, 2018.

M. Al Mamoori et al., “Magnetization Reversal of Individual 3D Nanostructures,” presented at the 21. International Conference on Magnetism ICM, San Francisco, 2018.

M. Al Mamoori, L. Keller, C. Schröder, M. Huth, and J. Müller, “Magnetic properties of nano-engineered 3D Fe-Co structures,” presented at the 9th Joint European Magnetic Symposia (JEMS) Conference, Mainz, 2018.

A. Laas and C. Schröder, “A target field approach for the design of non-conventional 3D coils,” in Verhandlungen der Deutschen Physikalischen Gesellschaft, Berlin, 2018.

N. Grimmelsmann, M. Kreuziger, M. Korger, H. Meissner, and A. Ehrmann, “Adhesion of 3D printed material on textile substrates,” Rapid Prototyping Journal, vol. 24, no. 1, pp. 166–170, 2018.

T. Spahiu, M. Al-Arabiyat, Y. Martens, A. Ehrmann, E. Piperi, and E. Shehi, “Adhesion of 3D printing polymers on textile fabrics for garment production,” in IOP Conference Series: Materials Science and Engineering, 2018, vol. 459.

L. Unger et al., “Increasing adhesion of 3D printing on textile fabrics by polymer coating,” Tekstilec, vol. 61, no. 4, pp. 265–271, 2018.

N. Grimmelsmann, M. Kreuziger, M. Korger, H. Meissner, and A. Ehrmann, “Adhesion of 3D printed material on textile substrates,” Rapid Prototyping Journal, vol. 24, no. 1, pp. 166–170, 2018.

D. Kappe, C. Schröder, and A. Hütten, “Calculating the GMR in granular Systems using 3D resistor networks,” in Verhandlungen der Deutschen Physikalischen Gesellschaft, Dresden, 2017.

S. Fafenrot, N. Grimmelsmann, M. Wortmann, and A. Ehrmann, “Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling,” Materials, vol. 10, no. 10, 2017.

Y. Martens and A. Ehrmann, “Composites of 3D-Printed Polymers and Textile Fabrics*,” in IOP Conference Series: Materials Science and Engineering, 2017, vol. 225.

T. Blachowicz and A. Ehrmann, “Micromagnetic investigation of low-symmetry 3D particles,” in IOP Conference Series: Materials Science and Engineering, 2017, vol. 175.

A. Ehrmann, “D printing in the textile chain,” IoTex, vol. 2017, no. 5, pp. 37–39, 2017.

C. Dopke, N. Grimmelsmann, and A. Ehrmann, “A new dimension in finishing textiles: 3D printing onto warp-knitted textiles - Possibilities and technical limitations,” Kettenwirk-Praxis, vol. 2017-January, no. 1, pp. 25–27, 2017.

C. Dopke, Y. Martens, N. Grimmelsmann, and A. Ehrmann, “D-printing on textile fabrics,” 2017, pp. 201–215.

M. Normann, T. Grethe, K. Zoll, A. Ehrmann, and A. Schwarz-Pfeiffer, “Development of 2D and 3D structured textile batteries processing conductive material with Tailored Fiber Placement (TFP),” in IOP Conference Series: Materials Science and Engineering, 2017, vol. 254.

T. Spahiu, S. Fafenrot, N. Grimmelsmann, E. Piperi, E. Shehi, and A. Ehrmann, “Varying fabric drape by 3D-imprinted patterns for garment design,” in IOP Conference Series: Materials Science and Engineering, 2017, vol. 254.

S. Fafenrot, N. Grimmelsmann, M. Wortmann, and A. Ehrmann, “Three-dimensional (3D) printing of polymer-metal hybrid materials by fused deposition modeling,” Materials, vol. 10, no. 10, 2017.

E. Kreikebaum, M. Lutz, M. Doerfel, K. Finsterbusch, and A. Ehrmann, “D-Druck von Blindenschrift auf Textil,” Melliand Textilberichte, vol. 97, no. 3, pp. 140–141, 2016.

N. Grimmelsmann, H. Meissner, and A. Ehrmann, “D printed auxetic forms on knitted fabrics for adjustable permeability and mechanical properties,” in IOP Conference Series: Materials Science and Engineering, 2016, vol. 137.

T. Blachowicz and A. Ehrmann, “Magnetization reversal in 3D nano-structures of different shapes,” in AIP Conference Proceedings, 2016, vol. 1727.

L. Sabantina, F. Kinzel, A. Ehrmann, and K. Finsterbusch, “Combining 3D printed forms with textile structures - Mechanical and geometrical properties of multi-material systems,” in IOP Conference Series: Materials Science and Engineering, 2015, vol. 87.

G. Hirschfeld, J. Wager, P. Schmidt, and B. Zernikow, “Minimally Clinically Significant Differences for Adolescents With Chronic Pain-Variability of ROC-Based Cut Points.,” Journal of Pain, vol. 15, no. 1, pp. 32–39, 2014.

T. Blachowicz and A. Ehrmann, “Anatomy of demagnetizing and exchange fields in magnetic nano-dots influenced by 3D shape modifications,” Journal of Physics: Conference Series, vol. 574, no. 1, 2014.

R. Melnikova, A. Ehrmann, and K. Finsterbusch, “D printing of textile-based structures by Fused Deposition Modelling (FDM) with different polymer materials,” in IOP Conference Series: Materials Science and Engineering, 2014, vol. 62.

D. Kleinehanding, L. Teich, and C. Schröder, “D-Modeling of Magnetophoretic Separation of Superparamagnetic Dispersions using COMSOL Multiphysics’ Particle Tracing Module,” presented at the Comsol Conference Europe, Rotterdam, 2013.

B. Passlack, A. Ehrmann, and K. Finsterbusch, “D print - A new industrial revolution in the clothing sector,” Melliand Textilberichte, vol. 94, no. 4, pp. 224–225, 2013.

G. Hirschfeld et al., “Maintaining Lasting Improvements: One-Year Follow-Up of Children With Severe Chronic Pain Undergoing Multimodal Inpatient Treatment.,” Journal of Pediatric Psychology, vol. 38, pp. 224–236, 2012.

C. Schröder et al., “Spin freezing and slow magnetization dynamics in geometrically frustrated magnetic molecules with exchange disorder,” Journal of Physics: Condensed Matter, vol. 22, no. 21, 2010.