[{"quality_controlled":"1","volume":"online first","date_created":"2026-02-03T10:36:38Z","title":"3D biomaterials produced by near-field electrospinning and melt electrowriting","file_date_updated":"2026-02-03T10:33:38Z","user_id":"263827","file":[{"file_name":"_2025_Kola_HemInd_online-first.pdf","file_size":801189,"content_type":"application/pdf","success":1,"date_updated":"2026-02-03T10:33:38Z","date_created":"2026-02-03T10:33:38Z","creator":"aehrmann","access_level":"open_access","relation":"main_file","file_id":"6504"}],"publication_identifier":{"eissn":["2217-7426"],"issn":["0367-598X"]},"type":"journal_article","publication":"Hemijska industrija","status":"public","page":"13","doi":"10.2298/HEMIND250111013K","year":"2025","article_type":"review","main_file_link":[{"open_access":"1"}],"tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"oa":"1","project":[{"name":"Institut für Technische Energie-Systeme","_id":"0ec202b7-cd76-11ed-89f4-a9e1a6dbdaa7"}],"has_accepted_license":"1","keyword":["3D porous scaffolds","biomedicine","nanofibers","three-dimensional shapes","biomedicine"],"urn":"urn:nbn:de:hbz:bi10-65038","publication_status":"published","issue":"00","citation":{"alphadin":"<span style=\"font-variant:small-caps;\">Kola, Ilda</span> ; <span style=\"font-variant:small-caps;\">Joshi, Jnanada Shrikant</span> ; <span style=\"font-variant:small-caps;\">Mpofu, Nonsikelelo</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: 3D biomaterials produced by near-field electrospinning and melt electrowriting. In: <i>Hemijska industrija</i> Bd. online first, National Library of Serbia (2025), Nr. 00, S. 13","bibtex":"@article{Kola_Joshi_Mpofu_Ehrmann_2025, title={3D biomaterials produced by near-field electrospinning and melt electrowriting}, volume={online first}, DOI={<a href=\"https://doi.org/10.2298/HEMIND250111013K\">10.2298/HEMIND250111013K</a>}, number={00}, journal={Hemijska industrija}, publisher={National Library of Serbia}, author={Kola, Ilda and Joshi, Jnanada Shrikant and Mpofu, Nonsikelelo and Ehrmann, Andrea}, year={2025}, pages={13} }","apa":"Kola, I., Joshi, J. S., Mpofu, N., &#38; Ehrmann, A. (2025). 3D biomaterials produced by near-field electrospinning and melt electrowriting. <i>Hemijska Industrija</i>, <i>online first</i>(00), 13. <a href=\"https://doi.org/10.2298/HEMIND250111013K\">https://doi.org/10.2298/HEMIND250111013K</a>","ieee":"I. Kola, J. S. Joshi, N. Mpofu, and A. Ehrmann, “3D biomaterials produced by near-field electrospinning and melt electrowriting,” <i>Hemijska industrija</i>, vol. online first, no. 00, p. 13, 2025.","mla":"Kola, Ilda, et al. “3D Biomaterials Produced by Near-Field Electrospinning and Melt Electrowriting.” <i>Hemijska Industrija</i>, vol. online first, no. 00, National Library of Serbia, 2025, p. 13, doi:<a href=\"https://doi.org/10.2298/HEMIND250111013K\">10.2298/HEMIND250111013K</a>.","ama":"Kola I, Joshi JS, Mpofu N, Ehrmann A. 3D biomaterials produced by near-field electrospinning and melt electrowriting. <i>Hemijska industrija</i>. 2025;online first(00):13. doi:<a href=\"https://doi.org/10.2298/HEMIND250111013K\">10.2298/HEMIND250111013K</a>","short":"I. Kola, J.S. Joshi, N. Mpofu, A. Ehrmann, Hemijska Industrija online first (2025) 13.","chicago":"Kola, Ilda, Jnanada Shrikant Joshi, Nonsikelelo Mpofu, and Andrea Ehrmann. “3D Biomaterials Produced by Near-Field Electrospinning and Melt Electrowriting.” <i>Hemijska Industrija</i> online first, no. 00 (2025): 13. <a href=\"https://doi.org/10.2298/HEMIND250111013K\">https://doi.org/10.2298/HEMIND250111013K</a>."},"author":[{"first_name":"Ilda","full_name":"Kola, Ilda","last_name":"Kola"},{"orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0001-6063-5989/work/204539902","id":"231115","first_name":"Jnanada Shrikant","last_name":"Joshi","full_name":"Joshi, Jnanada Shrikant","orcid":"0000-0001-6063-5989"},{"first_name":"Nonsikelelo","full_name":"Mpofu, Nonsikelelo","last_name":"Mpofu"},{"full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/204528119","first_name":"Andrea"}],"date_updated":"2026-03-17T15:29:31Z","publisher":"National Library of Serbia","language":[{"iso":"eng"}],"_id":"6503"},{"user_id":"220548","has_accepted_license":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"oa":"1","file":[{"access_level":"open_access","relation":"main_file","file_id":"5038","file_name":"_2024_Tuvshinbayar_CDATP5_169-177.pdf","file_size":1725005,"content_type":"application/pdf","success":1,"date_updated":"2024-10-10T15:56:18Z","date_created":"2024-10-10T15:56:18Z","creator":"aehrmann"}],"publication_identifier":{"eissn":["2701-939X"]},"type":"journal_article","keyword":["3D printing","fused deposition modeling (FDM)","stereolithography (SLA)","adhesion","textile fabric","woven fabric"],"urn":"urn:nbn:de:hbz:bi10-50370","publication_status":"published","issue":"2","publication":"Communications in Development and Assembling of Textile Products","quality_controlled":"1","volume":5,"date_created":"2024-10-10T15:57:02Z","article_type":"original","file_date_updated":"2024-10-10T15:56:18Z","title":"Comparison of FDM and SLA printing on woven fabrics","language":[{"iso":"eng"}],"_id":"5037","year":"2024","status":"public","citation":{"ama":"Tuvshinbayar K, Mpofu NS, Berger T, Storck JL, Büsgen A, Ehrmann A. Comparison of FDM and SLA printing on woven fabrics. <i>Communications in Development and Assembling of Textile Products</i>. 2024;5(2):169-177. doi:<a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">10.25367/cdatp.2024.5.p169-177</a>","mla":"Tuvshinbayar, Khorolsuren, et al. “Comparison of FDM and SLA Printing on Woven Fabrics.” <i>Communications in Development and Assembling of Textile Products</i>, vol. 5, no. 2, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden, 2024, pp. 169–77, doi:<a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">10.25367/cdatp.2024.5.p169-177</a>.","short":"K. Tuvshinbayar, N.S. Mpofu, T. Berger, J.L. Storck, A. Büsgen, A. Ehrmann, Communications in Development and Assembling of Textile Products 5 (2024) 169–177.","chicago":"Tuvshinbayar, Khorolsuren, Nonsikelelo Sheron Mpofu, Thomas Berger, Jan Lukas Storck, Alexander Büsgen, and Andrea Ehrmann. “Comparison of FDM and SLA Printing on Woven Fabrics.” <i>Communications in Development and Assembling of Textile Products</i> 5, no. 2 (2024): 169–77. <a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">https://doi.org/10.25367/cdatp.2024.5.p169-177</a>.","bibtex":"@article{Tuvshinbayar_Mpofu_Berger_Storck_Büsgen_Ehrmann_2024, title={Comparison of FDM and SLA printing on woven fabrics}, volume={5}, DOI={<a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">10.25367/cdatp.2024.5.p169-177</a>}, number={2}, journal={Communications in Development and Assembling of Textile Products}, publisher={Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden}, author={Tuvshinbayar, Khorolsuren and Mpofu, Nonsikelelo Sheron and Berger, Thomas and Storck, Jan Lukas and Büsgen, Alexander and Ehrmann, Andrea}, year={2024}, pages={169–177} }","apa":"Tuvshinbayar, K., Mpofu, N. S., Berger, T., Storck, J. L., Büsgen, A., &#38; Ehrmann, A. (2024). Comparison of FDM and SLA printing on woven fabrics. <i>Communications in Development and Assembling of Textile Products</i>, <i>5</i>(2), 169–177. <a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">https://doi.org/10.25367/cdatp.2024.5.p169-177</a>","alphadin":"<span style=\"font-variant:small-caps;\">Tuvshinbayar, Khorolsuren</span> ; <span style=\"font-variant:small-caps;\">Mpofu, Nonsikelelo Sheron</span> ; <span style=\"font-variant:small-caps;\">Berger, Thomas</span> ; <span style=\"font-variant:small-caps;\">Storck, Jan Lukas</span> ; <span style=\"font-variant:small-caps;\">Büsgen, Alexander</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Comparison of FDM and SLA printing on woven fabrics. In: <i>Communications in Development and Assembling of Textile Products</i> Bd. 5, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden (2024), Nr. 2, S. 169–177","ieee":"K. Tuvshinbayar, N. S. Mpofu, T. Berger, J. L. Storck, A. Büsgen, and A. Ehrmann, “Comparison of FDM and SLA printing on woven fabrics,” <i>Communications in Development and Assembling of Textile Products</i>, vol. 5, no. 2, pp. 169–177, 2024."},"author":[{"orcid":"0009-0001-7114-1842","full_name":"Tuvshinbayar, Khorolsuren","last_name":"Tuvshinbayar","first_name":"Khorolsuren","id":"222971"},{"first_name":"Nonsikelelo Sheron","last_name":"Mpofu","full_name":"Mpofu, Nonsikelelo Sheron"},{"first_name":"Thomas","full_name":"Berger, Thomas","last_name":"Berger"},{"orcid":"0000-0002-6841-8791","full_name":"Storck, Jan Lukas","last_name":"Storck","first_name":"Jan Lukas","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0002-6841-8791/work/169303729","id":"221157"},{"first_name":"Alexander","full_name":"Büsgen, Alexander","last_name":"Büsgen"},{"last_name":"Ehrmann","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/169303732","first_name":"Andrea"}],"date_updated":"2026-03-17T15:29:12Z","publisher":"Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden","page":"169-177","doi":"10.25367/cdatp.2024.5.p169-177","intvolume":"         5"},{"keyword":["3D printed nanostructures and nano-composites for application in MEMS","Lab-on-a-chip devices","Microfluidics","Microelectronics","Micro-batteries and other energy storage devices","Micro- and nano-sensors and -actuators (physical","chemical","biological)","Challenges and possible solutions of using 3D printing technologies for MEMS","Similar approaches related to 3D printing of MEMS technology"],"publication_status":"published","tmp":{"name":"Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)","image":"/images/cc_by_nc_nd.png","short":"CC BY-NC-ND (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-nc-nd/4.0/legalcode"},"oa":"1","publication_identifier":{"isbn":["978-3-0365-9770-6"]},"type":"book_editor","main_file_link":[{"url":"https://mdpi-res.com/bookfiles/book/8445/3D_Printing_of_MEMS_Technology.pdf?v=1702887078","open_access":"1"}],"user_id":"231260","date_created":"2023-12-14T14:52:39Z","title":" 3D Printing of MEMS Technology","quality_controlled":"1","editor":[{"id":"223776","first_name":"Andrea","last_name":"Ehrmann","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905"}],"_id":"4016","year":"2023","language":[{"iso":"eng"}],"doi":"10.3390/books978-3-0365-9771-3","date_updated":"2026-03-17T15:28:53Z","page":"194","publisher":"MDPI","citation":{"mla":"Ehrmann, Andrea, editor. <i> 3D Printing of MEMS Technology</i>. MDPI, 2023, doi:<a href=\"https://doi.org/10.3390/books978-3-0365-9771-3\">10.3390/books978-3-0365-9771-3</a>.","ama":"Ehrmann A, ed. <i> 3D Printing of MEMS Technology</i>. Basel: MDPI; 2023. doi:<a href=\"https://doi.org/10.3390/books978-3-0365-9771-3\">10.3390/books978-3-0365-9771-3</a>","short":"A. Ehrmann, ed.,  3D Printing of MEMS Technology, MDPI, Basel, 2023.","chicago":"Ehrmann, Andrea, ed. <i> 3D Printing of MEMS Technology</i>. Basel: MDPI, 2023. <a href=\"https://doi.org/10.3390/books978-3-0365-9771-3\">https://doi.org/10.3390/books978-3-0365-9771-3</a>.","alphadin":"<span style=\"font-variant:small-caps;\">Ehrmann, A.</span> (Hrsg.): <i> 3D Printing of MEMS Technology</i>. Basel : MDPI, 2023","apa":"Ehrmann, A. (Ed.). (2023). <i> 3D Printing of MEMS Technology</i>. Basel: MDPI. <a href=\"https://doi.org/10.3390/books978-3-0365-9771-3\">https://doi.org/10.3390/books978-3-0365-9771-3</a>","bibtex":"@book{Ehrmann_2023, place={Basel}, title={ 3D Printing of MEMS Technology}, DOI={<a href=\"https://doi.org/10.3390/books978-3-0365-9771-3\">10.3390/books978-3-0365-9771-3</a>}, publisher={MDPI}, year={2023} }","ieee":"A. Ehrmann, Ed., <i> 3D Printing of MEMS Technology</i>. Basel: MDPI, 2023."},"place":"Basel","status":"public"},{"status":"public","citation":{"short":"S. Cakar, A. Ehrmann, Tekstilec 66 (2023) 211–217.","chicago":"Cakar, Siver, and Andrea Ehrmann. “Adhesion and Stab-Resistant Properties of FDM-Printed Polymer/Textile Composites.” <i>Tekstilec</i> 66 (2023): 211–17. <a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">https://doi.org/10.14502/tekstilec.66.2023050</a>.","ama":"Cakar S, Ehrmann A. Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites. <i>Tekstilec</i>. 2023;66:211-217. doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">10.14502/tekstilec.66.2023050</a>","mla":"Cakar, Siver, and Andrea Ehrmann. “Adhesion and Stab-Resistant Properties of FDM-Printed Polymer/Textile Composites.” <i>Tekstilec</i>, vol. 66, University of Ljubljana, 2023, pp. 211–17, doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">10.14502/tekstilec.66.2023050</a>.","ieee":"S. Cakar and A. Ehrmann, “Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites,” <i>Tekstilec</i>, vol. 66, pp. 211–217, 2023.","apa":"Cakar, S., &#38; Ehrmann, A. (2023). Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites. <i>Tekstilec</i>, <i>66</i>, 211–217. <a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">https://doi.org/10.14502/tekstilec.66.2023050</a>","bibtex":"@article{Cakar_Ehrmann_2023, title={Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites}, volume={66}, DOI={<a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">10.14502/tekstilec.66.2023050</a>}, journal={Tekstilec}, publisher={University of Ljubljana}, author={Cakar, Siver and Ehrmann, Andrea}, year={2023}, pages={211–217} }","alphadin":"<span style=\"font-variant:small-caps;\">Cakar, Siver</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites. In: <i>Tekstilec</i> Bd. 66, University of Ljubljana (2023), S. 211–217"},"author":[{"first_name":"Siver","full_name":"Cakar, Siver","last_name":"Cakar"},{"full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann","id":"223776","first_name":"Andrea"}],"page":"211-217","publisher":"University of Ljubljana","date_updated":"2026-03-17T15:28:49Z","intvolume":"        66","doi":"10.14502/tekstilec.66.2023050","language":[{"iso":"eng"}],"year":"2023","_id":"3755","quality_controlled":"1","volume":66,"file_date_updated":"2023-11-25T11:06:49Z","title":"Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites","article_type":"original","date_created":"2023-11-25T11:07:18Z","user_id":"220548","main_file_link":[{"url":"https://journals.uni-lj.si/tekstilec/article/view/14630","open_access":"1"}],"publication_identifier":{"eissn":["2350-3696"],"issn":["0351-3386"]},"type":"journal_article","file":[{"creator":"aehrmann","date_created":"2023-11-25T11:06:49Z","date_updated":"2023-11-25T11:06:49Z","success":1,"content_type":"application/pdf","file_size":976095,"file_name":"_2023_Cakar_Tekstilec66_online-first.pdf","relation":"main_file","file_id":"3756","access_level":"open_access"}],"has_accepted_license":"1","tmp":{"short":"CC BY-SA (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-sa/4.0/legalcode","name":"Creative Commons Attribution-ShareAlike 4.0 International Public License (CC BY-SA 4.0)","image":"/images/cc_by_sa.png"},"oa":"1","publication_status":"published","publication":"Tekstilec","keyword":["3D printing","fused deposition modeling (FDM)","flexible polymer","stab-resistance","VPAM-KDIW"],"urn":"urn:nbn:de:hbz:bi10-37551"},{"article_number":"3536","year":"2023","doi":"10.3390/polym15173536","intvolume":"        15","status":"public","publication":"Polymers","user_id":"245590","type":"journal_article","publication_identifier":{"eissn":["2073-4360"]},"file":[{"relation":"main_file","file_id":"3487","access_level":"open_access","date_updated":"2023-08-25T20:20:32Z","success":1,"creator":"aehrmann","date_created":"2023-08-25T20:20:32Z","file_size":4233554,"file_name":"_2023_Kozior_Polymers15_3536.pdf","content_type":"application/pdf"}],"volume":15,"date_created":"2023-08-25T20:20:54Z","file_date_updated":"2023-08-25T20:20:32Z","title":"First Proof-of-Principle of PolyJet 3D Printing on Textile Fabrics","funded_apc":"1","quality_controlled":"1","language":[{"iso":"eng"}],"_id":"3486","date_updated":"2026-03-17T15:28:45Z","publisher":"MDPI AG","citation":{"ieee":"T. Kozior and A. Ehrmann, “First Proof-of-Principle of PolyJet 3D Printing on Textile Fabrics,” <i>Polymers</i>, vol. 15, no. 17, 2023.","alphadin":"<span style=\"font-variant:small-caps;\">Kozior, Tomasz</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: First Proof-of-Principle of PolyJet 3D Printing on Textile Fabrics. In: <i>Polymers</i> Bd. 15, MDPI AG (2023), Nr. 17","bibtex":"@article{Kozior_Ehrmann_2023, title={First Proof-of-Principle of PolyJet 3D Printing on Textile Fabrics}, volume={15}, DOI={<a href=\"https://doi.org/10.3390/polym15173536\">10.3390/polym15173536</a>}, number={173536}, journal={Polymers}, publisher={MDPI AG}, author={Kozior, Tomasz and Ehrmann, Andrea}, year={2023} }","apa":"Kozior, T., &#38; Ehrmann, A. (2023). First Proof-of-Principle of PolyJet 3D Printing on Textile Fabrics. <i>Polymers</i>, <i>15</i>(17). <a href=\"https://doi.org/10.3390/polym15173536\">https://doi.org/10.3390/polym15173536</a>","chicago":"Kozior, Tomasz, and Andrea Ehrmann. “First Proof-of-Principle of PolyJet 3D Printing on Textile Fabrics.” <i>Polymers</i> 15, no. 17 (2023). <a href=\"https://doi.org/10.3390/polym15173536\">https://doi.org/10.3390/polym15173536</a>.","short":"T. Kozior, A. Ehrmann, Polymers 15 (2023).","mla":"Kozior, Tomasz, and Andrea Ehrmann. “First Proof-of-Principle of PolyJet 3D Printing on Textile Fabrics.” <i>Polymers</i>, vol. 15, no. 17, 3536, MDPI AG, 2023, doi:<a href=\"https://doi.org/10.3390/polym15173536\">10.3390/polym15173536</a>.","ama":"Kozior T, Ehrmann A. First Proof-of-Principle of PolyJet 3D Printing on Textile Fabrics. <i>Polymers</i>. 2023;15(17). doi:<a href=\"https://doi.org/10.3390/polym15173536\">10.3390/polym15173536</a>"},"author":[{"full_name":"Kozior, Tomasz","last_name":"Kozior","first_name":"Tomasz"},{"first_name":"Andrea","id":"223776","last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea"}],"urn":"urn:nbn:de:hbz:bi10-34864","keyword":["3D printing","adhesion","PolyJet modeling (PJM)","composite","woven fabrics"],"issue":"17","publication_status":"published","main_file_link":[{"url":"https://doi.org/10.3390/polym15173536","open_access":"1"}],"has_accepted_license":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"oa":"1","article_type":"original"},{"article_type":"original","keyword":["3D printing","fused deposition modeling (FDM)","high-performance polymers","high-performance polyolefin","fiber-reinforced polymers"],"urn":"urn:nbn:de:hbz:bi10-29124","publication_status":"published","issue":"1","has_accepted_license":"1","tmp":{"short":"CC BY-SA (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-sa/4.0/legalcode","name":"Creative Commons Attribution-ShareAlike 4.0 International Public License (CC BY-SA 4.0)","image":"/images/cc_by_sa.png"},"oa":"1","main_file_link":[{"url":"https://doi.org/10.14502/tekstilec.66.2023012","open_access":"1"}],"date_updated":"2026-03-17T15:28:38Z","publisher":"University of Ljubljana","citation":{"alphadin":"<span style=\"font-variant:small-caps;\">Erdem, Göksal</span> ; <span style=\"font-variant:small-caps;\">Grothe, Timo</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Adhesion of new thermoplastic materials printed on textile fabrics. In: <i>Tekstilec</i> Bd. 66, University of Ljubljana (2023), Nr. 1, S. 57–63","bibtex":"@article{Erdem_Grothe_Ehrmann_2023, title={Adhesion of new thermoplastic materials printed on textile fabrics}, volume={66}, DOI={<a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">10.14502/tekstilec.66.2023012</a>}, number={1}, journal={Tekstilec}, publisher={University of Ljubljana}, author={Erdem, Göksal and Grothe, Timo and Ehrmann, Andrea}, year={2023}, pages={57–63} }","apa":"Erdem, G., Grothe, T., &#38; Ehrmann, A. (2023). Adhesion of new thermoplastic materials printed on textile fabrics. <i>Tekstilec</i>, <i>66</i>(1), 57–63. <a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">https://doi.org/10.14502/tekstilec.66.2023012</a>","ieee":"G. Erdem, T. Grothe, and A. Ehrmann, “Adhesion of new thermoplastic materials printed on textile fabrics,” <i>Tekstilec</i>, vol. 66, no. 1, pp. 57–63, 2023.","mla":"Erdem, Göksal, et al. “Adhesion of New Thermoplastic Materials Printed on Textile Fabrics.” <i>Tekstilec</i>, vol. 66, no. 1, University of Ljubljana, 2023, pp. 57–63, doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">10.14502/tekstilec.66.2023012</a>.","ama":"Erdem G, Grothe T, Ehrmann A. Adhesion of new thermoplastic materials printed on textile fabrics. <i>Tekstilec</i>. 2023;66(1):57-63. doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">10.14502/tekstilec.66.2023012</a>","chicago":"Erdem, Göksal, Timo Grothe, and Andrea Ehrmann. “Adhesion of New Thermoplastic Materials Printed on Textile Fabrics.” <i>Tekstilec</i> 66, no. 1 (2023): 57–63. <a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">https://doi.org/10.14502/tekstilec.66.2023012</a>.","short":"G. Erdem, T. Grothe, A. Ehrmann, Tekstilec 66 (2023) 57–63."},"author":[{"first_name":"Göksal","full_name":"Erdem, Göksal","last_name":"Erdem"},{"last_name":"Grothe","orcid":"0000-0002-9099-4277","full_name":"Grothe, Timo","first_name":"Timo","id":"221330"},{"full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann","id":"223776","first_name":"Andrea"}],"_id":"2912","language":[{"iso":"eng"}],"date_created":"2023-05-12T12:28:41Z","title":"Adhesion of new thermoplastic materials printed on textile fabrics","file_date_updated":"2023-08-25T20:17:39Z","volume":66,"quality_controlled":"1","publication":"Tekstilec","publication_identifier":{"issn":["0351-3386"],"eissn":["2350-3696"]},"file":[{"access_level":"open_access","file_id":"3483","relation":"main_file","content_type":"application/pdf","file_name":"_2023_Göksal_Tekstilec66_57-63.pdf","file_size":989560,"creator":"aehrmann","date_created":"2023-08-25T20:17:39Z","success":1,"date_updated":"2023-08-25T20:17:39Z"}],"type":"journal_article","user_id":"245590","doi":"10.14502/tekstilec.66.2023012","intvolume":"        66","page":"57-63","status":"public","year":"2023"},{"publication_status":"published","issue":"1","series_title":"Eng. Proc.","keyword":["3D printing","fused deposition modeling (FDM)","angular accuracy","dimensional accuracy"],"urn":"urn:nbn:de:hbz:bi10-23530","oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"has_accepted_license":"1","publisher":"MDPI","date_updated":"2026-03-17T15:28:32Z","place":"Basel Switzerland","author":[{"last_name":"Ekinci","full_name":"Ekinci, Burhan","first_name":"Burhan"},{"first_name":"Andrea","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/181737433","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann"}],"citation":{"ama":"Ekinci B, Ehrmann A. Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In: Cennamo N, Ando B, Spagnuolo G, et al., eds. <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>. Vol 31. Eng. Proc. Basel Switzerland: MDPI; 2023:40. doi:<a href=\"https://doi.org/10.3390/ASEC2022-13811\">10.3390/ASEC2022-13811</a>","mla":"Ekinci, Burhan, and Andrea Ehrmann. “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing.” <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, edited by Nunzio  Cennamo et al., vol. 31, no. 1, MDPI, 2023, p. 40, doi:<a href=\"https://doi.org/10.3390/ASEC2022-13811\">10.3390/ASEC2022-13811</a>.","short":"B. Ekinci, A. Ehrmann, in: N. Cennamo, B. Ando, G. Spagnuolo, A.K. Sharma, R. Narayan, F. Arcadio, M. Pesavento, C. Marques, L. De Maria (Eds.), Proceedings of The 3rd International Electronic Conference on Applied Sciences, MDPI, Basel Switzerland, 2023, p. 40.","chicago":"Ekinci, Burhan, and Andrea Ehrmann. “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing.” In <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, edited by Nunzio  Cennamo, Bruno  Ando, Gianrico  Spagnuolo, Anuj K. Sharma, Roger  Narayan, Francesco  Arcadio, Maria  Pesavento, Carlos  Marques, and Letizia  De Maria, 31:40. Eng. Proc. Basel Switzerland: MDPI, 2023. <a href=\"https://doi.org/10.3390/ASEC2022-13811\">https://doi.org/10.3390/ASEC2022-13811</a>.","apa":"Ekinci, B., &#38; Ehrmann, A. (2023). Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In N. Cennamo, B. Ando, G. Spagnuolo, A. K. Sharma, R. Narayan, F. Arcadio, … L. De Maria (Eds.), <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i> (Vol. 31, p. 40). Basel Switzerland: MDPI. <a href=\"https://doi.org/10.3390/ASEC2022-13811\">https://doi.org/10.3390/ASEC2022-13811</a>","bibtex":"@inproceedings{Ekinci_Ehrmann_2023, place={Basel Switzerland}, series={Eng. Proc.}, title={Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing}, volume={31}, DOI={<a href=\"https://doi.org/10.3390/ASEC2022-13811\">10.3390/ASEC2022-13811</a>}, number={1}, booktitle={Proceedings of The 3rd International Electronic Conference on Applied Sciences}, publisher={MDPI}, author={Ekinci, Burhan and Ehrmann, Andrea}, editor={Cennamo, Nunzio  and Ando, Bruno  and Spagnuolo, Gianrico  and Sharma, Anuj K. and Narayan, Roger  and Arcadio, Francesco  and Pesavento, Maria  and Marques, Carlos  and De Maria, Letizia Editors}, year={2023}, pages={40}, collection={Eng. Proc.} }","alphadin":"<span style=\"font-variant:small-caps;\">Ekinci, Burhan</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In: <span style=\"font-variant:small-caps;\"><span style=\"font-variant:small-caps;\">Cennamo, N.</span> ; <span style=\"font-variant:small-caps;\">Ando, B.</span> ; <span style=\"font-variant:small-caps;\">Spagnuolo, G.</span> ; <span style=\"font-variant:small-caps;\">Sharma, A. K.</span> ; <span style=\"font-variant:small-caps;\">Narayan, R.</span> ; <span style=\"font-variant:small-caps;\">Arcadio, F.</span> ; <span style=\"font-variant:small-caps;\">Pesavento, M.</span> ; <span style=\"font-variant:small-caps;\">Marques, C.</span> ; u. a.</span> (Hrsg.): <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, <i>Eng. Proc.</i>. Bd. 31. Basel Switzerland : MDPI, 2023, S. 40","ieee":"B. Ekinci and A. Ehrmann, “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing,” in <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, Online, 2023, vol. 31, no. 1, p. 40."},"editor":[{"first_name":"Nunzio ","full_name":"Cennamo, Nunzio ","last_name":"Cennamo"},{"last_name":"Ando","full_name":"Ando, Bruno ","first_name":"Bruno "},{"full_name":"Spagnuolo, Gianrico ","last_name":"Spagnuolo","first_name":"Gianrico "},{"first_name":"Anuj K.","last_name":"Sharma","full_name":"Sharma, Anuj K."},{"last_name":"Narayan","full_name":"Narayan, Roger ","first_name":"Roger "},{"first_name":"Francesco ","full_name":"Arcadio, Francesco ","last_name":"Arcadio"},{"first_name":"Maria ","full_name":"Pesavento, Maria ","last_name":"Pesavento"},{"first_name":"Carlos ","full_name":"Marques, Carlos ","last_name":"Marques"},{"last_name":"De Maria","full_name":"De Maria, Letizia ","first_name":"Letizia "}],"_id":"2353","language":[{"iso":"eng"}],"file_date_updated":"2023-02-07T07:32:05Z","title":"Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing","date_created":"2023-02-07T07:32:57Z","volume":31,"quality_controlled":"1","publication":"Proceedings of The 3rd International Electronic Conference on Applied Sciences","type":"conference","file":[{"file_id":"2354","relation":"main_file","access_level":"open_access","date_created":"2023-02-07T07:32:05Z","creator":"aehrmann","date_updated":"2023-02-07T07:32:05Z","success":1,"content_type":"application/pdf","file_name":"_2023_Ekinci_EngProc31_40.pdf","file_size":3784450}],"user_id":"220548","intvolume":"        31","doi":"10.3390/ASEC2022-13811","page":"40","conference":{"start_date":"2022-12-01","end_date":"2022-12-15","location":"Online","name":"The 3rd International Electronic Conference on Applied Sciences"},"status":"public","year":"2023"},{"quality_controlled":"1","date_created":"2022-07-14T17:39:48Z","file_date_updated":"2022-07-14T17:39:01Z","article_type":"original","title":"Electrospinning for the Modification of 3D Objects for the Potential Use in Tissue Engineering","volume":10,"has_accepted_license":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"oa":"1","file":[{"content_type":"application/pdf","file_size":12036821,"file_name":"_2022_Bauer_Technologies10_66v2.pdf","date_created":"2022-07-14T17:39:01Z","creator":"aehrmann","success":1,"date_updated":"2022-07-14T17:39:01Z","access_level":"open_access","file_id":"2020","relation":"main_file"}],"type":"journal_article","publication_identifier":{"eissn":["2227-7080"]},"user_id":"216459","urn":"urn:nbn:de:hbz:bi10-20192","keyword":["needleless electrospinning","poly(lactic acid) (PLA)","poly(acrylonitrile) (PAN)","nanospider","cell adhesion","cell proliferation","3D printing"],"publication_status":"published","publication":"Technologies","issue":"3","citation":{"short":"L. Bauer, L. Brandstäter, M. Letmate, M. Palachandran, F.O. Wadehn, C. Wolfschmidt, T. Grothe, U. Güth, A. Ehrmann, Technologies 10 (2022).","chicago":"Bauer, Laura, Lisa Brandstäter, Mika Letmate, Manasi Palachandran, Fynn Ole Wadehn, Carlotta Wolfschmidt, Timo Grothe, Uwe Güth, and Andrea Ehrmann. “Electrospinning for the Modification of 3D Objects for the Potential Use in Tissue Engineering.” <i>Technologies</i> 10, no. 3 (2022). <a href=\"https://doi.org/10.3390/technologies10030066\">https://doi.org/10.3390/technologies10030066</a>.","mla":"Bauer, Laura, et al. “Electrospinning for the Modification of 3D Objects for the Potential Use in Tissue Engineering.” <i>Technologies</i>, vol. 10, no. 3, 66, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/technologies10030066\">10.3390/technologies10030066</a>.","ama":"Bauer L, Brandstäter L, Letmate M, et al. Electrospinning for the Modification of 3D Objects for the Potential Use in Tissue Engineering. <i>Technologies</i>. 2022;10(3). doi:<a href=\"https://doi.org/10.3390/technologies10030066\">10.3390/technologies10030066</a>","ieee":"L. Bauer <i>et al.</i>, “Electrospinning for the Modification of 3D Objects for the Potential Use in Tissue Engineering,” <i>Technologies</i>, vol. 10, no. 3, 2022.","alphadin":"<span style=\"font-variant:small-caps;\"><span style=\"font-variant:small-caps;\">Bauer, Laura</span> ; <span style=\"font-variant:small-caps;\">Brandstäter, Lisa</span> ; <span style=\"font-variant:small-caps;\">Letmate, Mika</span> ; <span style=\"font-variant:small-caps;\">Palachandran, Manasi</span> ; <span style=\"font-variant:small-caps;\">Wadehn, Fynn Ole</span> ; <span style=\"font-variant:small-caps;\">Wolfschmidt, Carlotta</span> ; <span style=\"font-variant:small-caps;\">Grothe, Timo</span> ; <span style=\"font-variant:small-caps;\">Güth, Uwe</span> ; u. a.</span>: Electrospinning for the Modification of 3D Objects for the Potential Use in Tissue Engineering. In: <i>Technologies</i> Bd. 10, MDPI AG (2022), Nr. 3","bibtex":"@article{Bauer_Brandstäter_Letmate_Palachandran_Wadehn_Wolfschmidt_Grothe_Güth_Ehrmann_2022, title={Electrospinning for the Modification of 3D Objects for the Potential Use in Tissue Engineering}, volume={10}, DOI={<a href=\"https://doi.org/10.3390/technologies10030066\">10.3390/technologies10030066</a>}, number={366}, journal={Technologies}, publisher={MDPI AG}, author={Bauer, Laura and Brandstäter, Lisa and Letmate, Mika and Palachandran, Manasi and Wadehn, Fynn Ole and Wolfschmidt, Carlotta and Grothe, Timo and Güth, Uwe and Ehrmann, Andrea}, year={2022} }","apa":"Bauer, L., Brandstäter, L., Letmate, M., Palachandran, M., Wadehn, F. O., Wolfschmidt, C., … Ehrmann, A. (2022). Electrospinning for the Modification of 3D Objects for the Potential Use in Tissue Engineering. <i>Technologies</i>, <i>10</i>(3). <a href=\"https://doi.org/10.3390/technologies10030066\">https://doi.org/10.3390/technologies10030066</a>"},"author":[{"first_name":"Laura","last_name":"Bauer","full_name":"Bauer, Laura"},{"first_name":"Lisa","last_name":"Brandstäter","full_name":"Brandstäter, Lisa"},{"first_name":"Mika","full_name":"Letmate, Mika","last_name":"Letmate"},{"last_name":"Palachandran","full_name":"Palachandran, Manasi","first_name":"Manasi"},{"first_name":"Fynn Ole","full_name":"Wadehn, Fynn Ole","last_name":"Wadehn"},{"first_name":"Carlotta","last_name":"Wolfschmidt","full_name":"Wolfschmidt, Carlotta"},{"last_name":"Grothe","orcid":"0000-0002-9099-4277","full_name":"Grothe, Timo","first_name":"Timo","id":"221330"},{"first_name":"Uwe","full_name":"Güth, Uwe","last_name":"Güth"},{"id":"223776","first_name":"Andrea","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann"}],"status":"public","doi":"10.3390/technologies10030066","intvolume":"        10","date_updated":"2026-03-17T15:28:27Z","publisher":"MDPI AG","_id":"2019","year":"2022","language":[{"iso":"eng"}],"article_number":"66"},{"funded_apc":"1","department":[{"_id":"103"}],"quality_controlled":"1","volume":8,"date_created":"2021-01-03T18:14:05Z","title":" Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment","file_date_updated":"2021-01-03T18:13:31Z","article_type":"original","main_file_link":[{"open_access":"1"}],"user_id":"220548","oa":"1","has_accepted_license":"1","file":[{"access_level":"open_access","relation":"main_file","file_id":"695","file_name":"_2021_Sölmann_AIMSBioneng8_25-35.pdf","file_size":1154128,"content_type":"application/pdf","date_updated":"2021-01-03T18:13:31Z","success":1,"creator":"aehrmann","date_created":"2021-01-03T18:13:31Z"}],"type":"journal_article","urn":"urn:nbn:de:hbz:bi10-6949","keyword":["3D printing","FDM printing","sterilization","adherent cells","CHO cells"],"publication_status":"published","issue":"1","publication":"AIMS Bioengineering","status":"public","author":[{"last_name":"Sölmann","full_name":"Sölmann, Sven","first_name":"Sven"},{"last_name":"Rattenholl","full_name":"Rattenholl, Anke","first_name":"Anke"},{"first_name":"Hannah","full_name":"Blattner, Hannah","last_name":"Blattner"},{"last_name":"Ehrmann","full_name":"Ehrmann, Guido","first_name":"Guido"},{"full_name":"Gudermann, Frank","last_name":"Gudermann","first_name":"Frank"},{"full_name":"Lütkemeyer, Dirk","last_name":"Lütkemeyer","first_name":"Dirk"},{"last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","first_name":"Andrea","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105572547","id":"223776"}],"citation":{"ieee":"S. Sölmann <i>et al.</i>, “ Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment,” <i>AIMS Bioengineering</i>, vol. 8, no. 1, pp. 25–35, 2021.","apa":"Sölmann, S., Rattenholl, A., Blattner, H., Ehrmann, G., Gudermann, F., Lütkemeyer, D., &#38; Ehrmann, A. (2021).  Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment. <i>AIMS Bioengineering</i>, <i>8</i>(1), 25–35. <a href=\"https://doi.org/10.3934/bioeng.2021004\">https://doi.org/10.3934/bioeng.2021004</a>","bibtex":"@article{Sölmann_Rattenholl_Blattner_Ehrmann_Gudermann_Lütkemeyer_Ehrmann_2021, title={ Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment}, volume={8}, DOI={<a href=\"https://doi.org/10.3934/bioeng.2021004\">10.3934/bioeng.2021004</a>}, number={1}, journal={AIMS Bioengineering}, author={Sölmann, Sven and Rattenholl, Anke and Blattner, Hannah and Ehrmann, Guido and Gudermann, Frank and Lütkemeyer, Dirk and Ehrmann, Andrea}, year={2021}, pages={25–35} }","alphadin":"<span style=\"font-variant:small-caps;\">Sölmann, Sven</span> ; <span style=\"font-variant:small-caps;\">Rattenholl, Anke</span> ; <span style=\"font-variant:small-caps;\">Blattner, Hannah</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Guido</span> ; <span style=\"font-variant:small-caps;\">Gudermann, Frank</span> ; <span style=\"font-variant:small-caps;\">Lütkemeyer, Dirk</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>:  Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment. In: <i>AIMS Bioengineering</i> Bd. 8 (2021), Nr. 1, S. 25–35","chicago":"Sölmann, Sven, Anke Rattenholl, Hannah Blattner, Guido Ehrmann, Frank Gudermann, Dirk Lütkemeyer, and Andrea Ehrmann. “ Mammalian Cell Adhesion on Different 3D Printed Polymers with Varying Sterilization Methods and Acidic Treatment.” <i>AIMS Bioengineering</i> 8, no. 1 (2021): 25–35. <a href=\"https://doi.org/10.3934/bioeng.2021004\">https://doi.org/10.3934/bioeng.2021004</a>.","short":"S. Sölmann, A. Rattenholl, H. Blattner, G. Ehrmann, F. Gudermann, D. Lütkemeyer, A. Ehrmann, AIMS Bioengineering 8 (2021) 25–35.","ama":"Sölmann S, Rattenholl A, Blattner H, et al.  Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment. <i>AIMS Bioengineering</i>. 2021;8(1):25-35. doi:<a href=\"https://doi.org/10.3934/bioeng.2021004\">10.3934/bioeng.2021004</a>","mla":"Sölmann, Sven, et al. “ Mammalian Cell Adhesion on Different 3D Printed Polymers with Varying Sterilization Methods and Acidic Treatment.” <i>AIMS Bioengineering</i>, vol. 8, no. 1, 2021, pp. 25–35, doi:<a href=\"https://doi.org/10.3934/bioeng.2021004\">10.3934/bioeng.2021004</a>."},"date_updated":"2026-03-17T15:29:35Z","page":"25-35","doi":"10.3934/bioeng.2021004","intvolume":"         8","language":[{"iso":"eng"}],"_id":"694","year":"2021"},{"year":"2021","_id":"1602","language":[{"iso":"eng"}],"intvolume":"         2","doi":"10.25367/cdatp.2021.2.p34-39","publisher":"Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden","page":"34-39","date_updated":"2026-03-17T15:28:23Z","author":[{"first_name":"Jannik","full_name":"Störmer, Jannik","last_name":"Störmer"},{"last_name":"Görmer","full_name":"Görmer, Daniel","first_name":"Daniel"},{"orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann","first_name":"Andrea","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105572074","id":"223776"}],"citation":{"short":"J. Störmer, D. Görmer, A. Ehrmann, Communications in Development and Assembling of Textile Products 2 (2021) 34–39.","chicago":"Störmer, Jannik, Daniel Görmer, and Andrea Ehrmann. “Influence of Washing on the Adhesion between 3D-Printed TPU and Woven Fabrics.” <i>Communications in Development and Assembling of Textile Products</i> 2, no. 1 (2021): 34–39. <a href=\"https://doi.org/10.25367/cdatp.2021.2.p34-39\">https://doi.org/10.25367/cdatp.2021.2.p34-39</a>.","ama":"Störmer J, Görmer D, Ehrmann A. Influence of washing on the adhesion between 3D-printed TPU and woven fabrics. <i>Communications in Development and Assembling of Textile Products</i>. 2021;2(1):34-39. doi:<a href=\"https://doi.org/10.25367/cdatp.2021.2.p34-39\">10.25367/cdatp.2021.2.p34-39</a>","mla":"Störmer, Jannik, et al. “Influence of Washing on the Adhesion between 3D-Printed TPU and Woven Fabrics.” <i>Communications in Development and Assembling of Textile Products</i>, vol. 2, no. 1, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden, 2021, pp. 34–39, doi:<a href=\"https://doi.org/10.25367/cdatp.2021.2.p34-39\">10.25367/cdatp.2021.2.p34-39</a>.","ieee":"J. Störmer, D. Görmer, and A. Ehrmann, “Influence of washing on the adhesion between 3D-printed TPU and woven fabrics,” <i>Communications in Development and Assembling of Textile Products</i>, vol. 2, no. 1, pp. 34–39, 2021.","apa":"Störmer, J., Görmer, D., &#38; Ehrmann, A. (2021). Influence of washing on the adhesion between 3D-printed TPU and woven fabrics. <i>Communications in Development and Assembling of Textile Products</i>, <i>2</i>(1), 34–39. <a href=\"https://doi.org/10.25367/cdatp.2021.2.p34-39\">https://doi.org/10.25367/cdatp.2021.2.p34-39</a>","bibtex":"@article{Störmer_Görmer_Ehrmann_2021, title={Influence of washing on the adhesion between 3D-printed TPU and woven fabrics}, volume={2}, DOI={<a href=\"https://doi.org/10.25367/cdatp.2021.2.p34-39\">10.25367/cdatp.2021.2.p34-39</a>}, number={1}, journal={Communications in Development and Assembling of Textile Products}, publisher={Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden}, author={Störmer, Jannik and Görmer, Daniel and Ehrmann, Andrea}, year={2021}, pages={34–39} }","alphadin":"<span style=\"font-variant:small-caps;\">Störmer, Jannik</span> ; <span style=\"font-variant:small-caps;\">Görmer, Daniel</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Influence of washing on the adhesion between 3D-printed TPU and woven fabrics. In: <i>Communications in Development and Assembling of Textile Products</i> Bd. 2, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden (2021), Nr. 1, S. 34–39"},"status":"public","publication":"Communications in Development and Assembling of Textile Products","publication_status":"published","issue":"1","keyword":["3D printing","Thermoplastic polyurethane (TPU)","Adhesion","Thermal after-treatment","Heat press","Washing","Nozzle-textile distance"],"publication_identifier":{"eissn":["2701-939X"]},"type":"journal_article","oa":"1","tmp":{"name":"Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)","image":"/images/cc_by_nc_nd.png","short":"CC BY-NC-ND (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-nc-nd/4.0/legalcode"},"user_id":"220548","main_file_link":[{"url":"https://doi.org/10.25367/cdatp.2021.2.p34-39 ","open_access":"1"}],"title":"Influence of washing on the adhesion between 3D-printed TPU and woven fabrics","article_type":"original","date_created":"2022-01-01T14:12:51Z","volume":2,"quality_controlled":"1","department":[{"_id":"103"}]},{"intvolume":"         9","doi":"10.3390/technologies9020029","publisher":"MDPI AG","date_updated":"2026-03-17T15:28:23Z","author":[{"last_name":"Koske","full_name":"Koske, Daniel","first_name":"Daniel"},{"last_name":"Ehrmann","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105571935","id":"223776","first_name":"Andrea"}],"citation":{"apa":"Koske, D., &#38; Ehrmann, A. (2021). Infill Designs for 3D-Printed Shape-Memory Objects. <i>Technologies</i>, <i>9</i>(2). <a href=\"https://doi.org/10.3390/technologies9020029\">https://doi.org/10.3390/technologies9020029</a>","bibtex":"@article{Koske_Ehrmann_2021, title={Infill Designs for 3D-Printed Shape-Memory Objects}, volume={9}, DOI={<a href=\"https://doi.org/10.3390/technologies9020029\">10.3390/technologies9020029</a>}, number={229}, journal={Technologies}, publisher={MDPI AG}, author={Koske, Daniel and Ehrmann, Andrea}, year={2021} }","alphadin":"<span style=\"font-variant:small-caps;\">Koske, Daniel</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Infill Designs for 3D-Printed Shape-Memory Objects. In: <i>Technologies</i> Bd. 9, MDPI AG (2021), Nr. 2","ieee":"D. Koske and A. Ehrmann, “Infill Designs for 3D-Printed Shape-Memory Objects,” <i>Technologies</i>, vol. 9, no. 2, 2021.","ama":"Koske D, Ehrmann A. Infill Designs for 3D-Printed Shape-Memory Objects. <i>Technologies</i>. 2021;9(2). doi:<a href=\"https://doi.org/10.3390/technologies9020029\">10.3390/technologies9020029</a>","mla":"Koske, Daniel, and Andrea Ehrmann. “Infill Designs for 3D-Printed Shape-Memory Objects.” <i>Technologies</i>, vol. 9, no. 2, 29, MDPI AG, 2021, doi:<a href=\"https://doi.org/10.3390/technologies9020029\">10.3390/technologies9020029</a>.","short":"D. Koske, A. Ehrmann, Technologies 9 (2021).","chicago":"Koske, Daniel, and Andrea Ehrmann. “Infill Designs for 3D-Printed Shape-Memory Objects.” <i>Technologies</i> 9, no. 2 (2021). <a href=\"https://doi.org/10.3390/technologies9020029\">https://doi.org/10.3390/technologies9020029</a>."},"status":"public","article_number":"29","year":"2021","_id":"1609","language":[{"iso":"eng"}],"title":"Infill Designs for 3D-Printed Shape-Memory Objects","article_type":"original","date_created":"2022-01-01T14:20:08Z","volume":9,"quality_controlled":"1","department":[{"_id":"103"}],"issue":"2","publication":"Technologies","publication_status":"published","keyword":["poly(lactic acid) (PLA)","shape-memory polymer (SMP)","fused deposition modeling (FDM)","3D printing","infill pattern"],"publication_identifier":{"eissn":["2227-7080"]},"type":"journal_article","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"oa":"1","user_id":"220548","main_file_link":[{"url":"https://doi.org/10.3390/technologies9020029","open_access":"1"}]},{"department":[{"_id":"103"}],"quality_controlled":"1","volume":2,"article_type":"review","title":"Shape memory textiles – technological background and possible applications","date_created":"2022-01-01T12:47:24Z","user_id":"220548","main_file_link":[{"url":"https://doi.org/10.25367/cdatp.2021.2.p162-172 ","open_access":"1"}],"type":"journal_article","publication_identifier":{"eissn":["2701-939X"]},"tmp":{"name":"Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)","image":"/images/cc_by_nc_nd.png","short":"CC BY-NC-ND (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-nc-nd/4.0/legalcode"},"oa":"1","publication":"Communications in Development and Assembling of Textile Products","issue":"2","publication_status":"published","keyword":["shape memory properties","3D printing","4D printing","polyurethane","wrinkle-free","design","stimulus","smart textile","recovery"],"status":"public","author":[{"first_name":"Guido","full_name":"Ehrmann, Guido","last_name":"Ehrmann"},{"first_name":"Andrea","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105572399","id":"223776","last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea"}],"citation":{"mla":"Ehrmann, Guido, and Andrea Ehrmann. “Shape Memory Textiles – Technological Background and Possible Applications.” <i>Communications in Development and Assembling of Textile Products</i>, vol. 2, no. 2, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden, 2021, pp. 162–72, doi:<a href=\"https://doi.org/10.25367/cdatp.2021.2.p162-172\">10.25367/cdatp.2021.2.p162-172</a>.","ama":"Ehrmann G, Ehrmann A. Shape memory textiles – technological background and possible applications. <i>Communications in Development and Assembling of Textile Products</i>. 2021;2(2):162-172. doi:<a href=\"https://doi.org/10.25367/cdatp.2021.2.p162-172\">10.25367/cdatp.2021.2.p162-172</a>","chicago":"Ehrmann, Guido, and Andrea Ehrmann. “Shape Memory Textiles – Technological Background and Possible Applications.” <i>Communications in Development and Assembling of Textile Products</i> 2, no. 2 (2021): 162–72. <a href=\"https://doi.org/10.25367/cdatp.2021.2.p162-172\">https://doi.org/10.25367/cdatp.2021.2.p162-172</a>.","short":"G. Ehrmann, A. Ehrmann, Communications in Development and Assembling of Textile Products 2 (2021) 162–172.","alphadin":"<span style=\"font-variant:small-caps;\">Ehrmann, Guido</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Shape memory textiles – technological background and possible applications. In: <i>Communications in Development and Assembling of Textile Products</i> Bd. 2, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden (2021), Nr. 2, S. 162–172","apa":"Ehrmann, G., &#38; Ehrmann, A. (2021). Shape memory textiles – technological background and possible applications. <i>Communications in Development and Assembling of Textile Products</i>, <i>2</i>(2), 162–172. <a href=\"https://doi.org/10.25367/cdatp.2021.2.p162-172\">https://doi.org/10.25367/cdatp.2021.2.p162-172</a>","bibtex":"@article{Ehrmann_Ehrmann_2021, title={Shape memory textiles – technological background and possible applications}, volume={2}, DOI={<a href=\"https://doi.org/10.25367/cdatp.2021.2.p162-172\">10.25367/cdatp.2021.2.p162-172</a>}, number={2}, journal={Communications in Development and Assembling of Textile Products}, publisher={Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden}, author={Ehrmann, Guido and Ehrmann, Andrea}, year={2021}, pages={162–172} }","ieee":"G. Ehrmann and A. Ehrmann, “Shape memory textiles – technological background and possible applications,” <i>Communications in Development and Assembling of Textile Products</i>, vol. 2, no. 2, pp. 162–172, 2021."},"publisher":"Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden","page":"162-172","date_updated":"2026-03-17T15:28:22Z","intvolume":"         2","doi":"10.25367/cdatp.2021.2.p162-172","language":[{"iso":"eng"}],"year":"2021","_id":"1578"},{"user_id":"220548","main_file_link":[{"url":"https://doi.org/10.25367/cdatp.2021.2.p115-122 ","open_access":"1"}],"publication_identifier":{"eissn":["2701-939X"]},"type":"journal_article","oa":"1","tmp":{"name":"Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)","image":"/images/cc_by_nc_nd.png","short":"CC BY-NC-ND (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-nc-nd/4.0/legalcode"},"publication_status":"published","publication":"Communications in Development and Assembling of Textile Products","issue":"2","keyword":["3D printing","Thermoplastic polyurethane (TPU)","Woven fabric","Knitted fabric","Martindale test","Abrasion"],"department":[{"_id":"103"}],"quality_controlled":"1","volume":2,"title":"Influence of elastic 3D printed polymers on the mechanical properties and tribology of textile fabrics","article_type":"original","date_created":"2022-01-01T12:56:40Z","language":[{"iso":"eng"}],"year":"2021","_id":"1583","status":"public","citation":{"ieee":"P. Steinmetz and A. Ehrmann, “Influence of elastic 3D printed polymers on the mechanical properties and tribology of textile fabrics,” <i>Communications in Development and Assembling of Textile Products</i>, vol. 2, no. 2, pp. 115–122, 2021.","alphadin":"<span style=\"font-variant:small-caps;\">Steinmetz, Pia</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Influence of elastic 3D printed polymers on the mechanical properties and tribology of textile fabrics. In: <i>Communications in Development and Assembling of Textile Products</i> Bd. 2, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden (2021), Nr. 2, S. 115–122","bibtex":"@article{Steinmetz_Ehrmann_2021, title={Influence of elastic 3D printed polymers on the mechanical properties and tribology of textile fabrics}, volume={2}, DOI={<a href=\"https://doi.org/10.25367/cdatp.2021.2.p115-122\">10.25367/cdatp.2021.2.p115-122</a>}, number={2}, journal={Communications in Development and Assembling of Textile Products}, publisher={Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden}, author={Steinmetz, Pia and Ehrmann, Andrea}, year={2021}, pages={115–122} }","apa":"Steinmetz, P., &#38; Ehrmann, A. (2021). Influence of elastic 3D printed polymers on the mechanical properties and tribology of textile fabrics. <i>Communications in Development and Assembling of Textile Products</i>, <i>2</i>(2), 115–122. <a href=\"https://doi.org/10.25367/cdatp.2021.2.p115-122\">https://doi.org/10.25367/cdatp.2021.2.p115-122</a>","chicago":"Steinmetz, Pia, and Andrea Ehrmann. “Influence of Elastic 3D Printed Polymers on the Mechanical Properties and Tribology of Textile Fabrics.” <i>Communications in Development and Assembling of Textile Products</i> 2, no. 2 (2021): 115–22. <a href=\"https://doi.org/10.25367/cdatp.2021.2.p115-122\">https://doi.org/10.25367/cdatp.2021.2.p115-122</a>.","short":"P. Steinmetz, A. Ehrmann, Communications in Development and Assembling of Textile Products 2 (2021) 115–122.","mla":"Steinmetz, Pia, and Andrea Ehrmann. “Influence of Elastic 3D Printed Polymers on the Mechanical Properties and Tribology of Textile Fabrics.” <i>Communications in Development and Assembling of Textile Products</i>, vol. 2, no. 2, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden, 2021, pp. 115–22, doi:<a href=\"https://doi.org/10.25367/cdatp.2021.2.p115-122\">10.25367/cdatp.2021.2.p115-122</a>.","ama":"Steinmetz P, Ehrmann A. Influence of elastic 3D printed polymers on the mechanical properties and tribology of textile fabrics. <i>Communications in Development and Assembling of Textile Products</i>. 2021;2(2):115-122. doi:<a href=\"https://doi.org/10.25367/cdatp.2021.2.p115-122\">10.25367/cdatp.2021.2.p115-122</a>"},"author":[{"first_name":"Pia","full_name":"Steinmetz, Pia","last_name":"Steinmetz"},{"first_name":"Andrea","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105572347","id":"223776","last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea"}],"publisher":"Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden","page":"115-122","date_updated":"2026-03-17T15:28:22Z","intvolume":"         2","doi":"10.25367/cdatp.2021.2.p115-122"},{"oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"publication_identifier":{"eissn":["2072-666X"]},"type":"journal_article","main_file_link":[{"url":"https://doi.org/10.3390/mi12101225","open_access":"1"}],"user_id":"220548","keyword":["3D printing","poly(lactic acid) (PLA)","fused deposition modeling (FDM)","shape-memory polymer (SMP)","4D printing","infill patterns"],"publication":"Micromachines","publication_status":"published","issue":"10","quality_controlled":"1","department":[{"_id":"103"}],"date_created":"2022-01-01T13:10:18Z","article_type":"original","title":"Advanced Infill Designs for 3D Printed Shape-Memory Components","volume":12,"_id":"1589","year":"2021","language":[{"iso":"eng"}],"article_number":"1225","citation":{"apa":"Koske, D., &#38; Ehrmann, A. (2021). Advanced Infill Designs for 3D Printed Shape-Memory Components. <i>Micromachines</i>, <i>12</i>(10). <a href=\"https://doi.org/10.3390/mi12101225\">https://doi.org/10.3390/mi12101225</a>","bibtex":"@article{Koske_Ehrmann_2021, title={Advanced Infill Designs for 3D Printed Shape-Memory Components}, volume={12}, DOI={<a href=\"https://doi.org/10.3390/mi12101225\">10.3390/mi12101225</a>}, number={101225}, journal={Micromachines}, publisher={MDPI AG}, author={Koske, Daniel and Ehrmann, Andrea}, year={2021} }","alphadin":"<span style=\"font-variant:small-caps;\">Koske, Daniel</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Advanced Infill Designs for 3D Printed Shape-Memory Components. In: <i>Micromachines</i> Bd. 12, MDPI AG (2021), Nr. 10","ieee":"D. Koske and A. Ehrmann, “Advanced Infill Designs for 3D Printed Shape-Memory Components,” <i>Micromachines</i>, vol. 12, no. 10, 2021.","ama":"Koske D, Ehrmann A. Advanced Infill Designs for 3D Printed Shape-Memory Components. <i>Micromachines</i>. 2021;12(10). doi:<a href=\"https://doi.org/10.3390/mi12101225\">10.3390/mi12101225</a>","mla":"Koske, Daniel, and Andrea Ehrmann. “Advanced Infill Designs for 3D Printed Shape-Memory Components.” <i>Micromachines</i>, vol. 12, no. 10, 1225, MDPI AG, 2021, doi:<a href=\"https://doi.org/10.3390/mi12101225\">10.3390/mi12101225</a>.","chicago":"Koske, Daniel, and Andrea Ehrmann. “Advanced Infill Designs for 3D Printed Shape-Memory Components.” <i>Micromachines</i> 12, no. 10 (2021). <a href=\"https://doi.org/10.3390/mi12101225\">https://doi.org/10.3390/mi12101225</a>.","short":"D. Koske, A. Ehrmann, Micromachines 12 (2021)."},"author":[{"first_name":"Daniel","last_name":"Koske","full_name":"Koske, Daniel"},{"id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105572308","first_name":"Andrea","last_name":"Ehrmann","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905"}],"status":"public","doi":"10.3390/mi12101225","intvolume":"        12","date_updated":"2026-03-17T15:28:22Z","publisher":"MDPI AG"},{"language":[{"iso":"eng"}],"_id":"1593","year":"2021","article_number":"63","status":"public","citation":{"ieee":"M. Ayvali, I. Wickenkamp, and A. Ehrmann, “Design, Construction and Tests of a Low-Cost Myoelectric Thumb,” <i>Technologies</i>, vol. 9, no. 3, 2021.","bibtex":"@article{Ayvali_Wickenkamp_Ehrmann_2021, title={Design, Construction and Tests of a Low-Cost Myoelectric Thumb}, volume={9}, DOI={<a href=\"https://doi.org/10.3390/technologies9030063\">10.3390/technologies9030063</a>}, number={363}, journal={Technologies}, publisher={MDPI AG}, author={Ayvali, Murat and Wickenkamp, Inge and Ehrmann, Andrea}, year={2021} }","apa":"Ayvali, M., Wickenkamp, I., &#38; Ehrmann, A. (2021). Design, Construction and Tests of a Low-Cost Myoelectric Thumb. <i>Technologies</i>, <i>9</i>(3). <a href=\"https://doi.org/10.3390/technologies9030063\">https://doi.org/10.3390/technologies9030063</a>","alphadin":"<span style=\"font-variant:small-caps;\">Ayvali, Murat</span> ; <span style=\"font-variant:small-caps;\">Wickenkamp, Inge</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Design, Construction and Tests of a Low-Cost Myoelectric Thumb. In: <i>Technologies</i> Bd. 9, MDPI AG (2021), Nr. 3","chicago":"Ayvali, Murat, Inge Wickenkamp, and Andrea Ehrmann. “Design, Construction and Tests of a Low-Cost Myoelectric Thumb.” <i>Technologies</i> 9, no. 3 (2021). <a href=\"https://doi.org/10.3390/technologies9030063\">https://doi.org/10.3390/technologies9030063</a>.","short":"M. Ayvali, I. Wickenkamp, A. Ehrmann, Technologies 9 (2021).","ama":"Ayvali M, Wickenkamp I, Ehrmann A. Design, Construction and Tests of a Low-Cost Myoelectric Thumb. <i>Technologies</i>. 2021;9(3). doi:<a href=\"https://doi.org/10.3390/technologies9030063\">10.3390/technologies9030063</a>","mla":"Ayvali, Murat, et al. “Design, Construction and Tests of a Low-Cost Myoelectric Thumb.” <i>Technologies</i>, vol. 9, no. 3, 63, MDPI AG, 2021, doi:<a href=\"https://doi.org/10.3390/technologies9030063\">10.3390/technologies9030063</a>."},"author":[{"full_name":"Ayvali, Murat","last_name":"Ayvali","first_name":"Murat"},{"first_name":"Inge","last_name":"Wickenkamp","full_name":"Wickenkamp, Inge"},{"last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","first_name":"Andrea","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105569194"}],"date_updated":"2026-03-17T15:28:22Z","publisher":"MDPI AG","doi":"10.3390/technologies9030063","intvolume":"         9","main_file_link":[{"url":"https://doi.org/10.3390/technologies9030063","open_access":"1"}],"user_id":"220548","oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"publication_identifier":{"eissn":["2227-7080"]},"type":"journal_article","keyword":["myoelectric prosthesis","3D printing","biomechatronics","6th finger","3rd thumb"],"publication":"Technologies","publication_status":"published","issue":"3","department":[{"_id":"103"}],"quality_controlled":"1","volume":9,"date_created":"2022-01-01T13:16:05Z","title":"Design, Construction and Tests of a Low-Cost Myoelectric Thumb","article_type":"original"},{"year":"2020","_id":"690","language":[{"iso":"eng"}],"intvolume":"         1","doi":"10.25367/cdatp.2020.1.p104-110","page":"104-110","date_updated":"2026-03-17T15:29:35Z","author":[{"first_name":"Daniel","last_name":"Görmer","full_name":"Görmer, Daniel"},{"last_name":"Störmer","full_name":"Störmer, Jannik","first_name":"Jannik"},{"id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/160366628","first_name":"Andrea","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann"}],"citation":{"ama":"Görmer D, Störmer J, Ehrmann A. The influence of thermal after-treatment on the adhesion of 3D prints on textile fabrics. <i>Communications in Development and Assembling of Textile Products</i>. 2020;1(2):104-110. doi:<a href=\"https://doi.org/10.25367/cdatp.2020.1.p104-110\">10.25367/cdatp.2020.1.p104-110</a>","mla":"Görmer, Daniel, et al. “The Influence of Thermal After-Treatment on the Adhesion of 3D Prints on Textile Fabrics.” <i>Communications in Development and Assembling of Textile Products</i>, vol. 1, no. 2, 2020, pp. 104–10, doi:<a href=\"https://doi.org/10.25367/cdatp.2020.1.p104-110\">10.25367/cdatp.2020.1.p104-110</a>.","short":"D. Görmer, J. Störmer, A. Ehrmann, Communications in Development and Assembling of Textile Products 1 (2020) 104–110.","chicago":"Görmer, Daniel, Jannik Störmer, and Andrea Ehrmann. “The Influence of Thermal After-Treatment on the Adhesion of 3D Prints on Textile Fabrics.” <i>Communications in Development and Assembling of Textile Products</i> 1, no. 2 (2020): 104–10. <a href=\"https://doi.org/10.25367/cdatp.2020.1.p104-110\">https://doi.org/10.25367/cdatp.2020.1.p104-110</a>.","bibtex":"@article{Görmer_Störmer_Ehrmann_2020, title={The influence of thermal after-treatment on the adhesion of 3D prints on textile fabrics}, volume={1}, DOI={<a href=\"https://doi.org/10.25367/cdatp.2020.1.p104-110\">10.25367/cdatp.2020.1.p104-110</a>}, number={2}, journal={Communications in Development and Assembling of Textile Products}, author={Görmer, Daniel and Störmer, Jannik and Ehrmann, Andrea}, year={2020}, pages={104–110} }","apa":"Görmer, D., Störmer, J., &#38; Ehrmann, A. (2020). The influence of thermal after-treatment on the adhesion of 3D prints on textile fabrics. <i>Communications in Development and Assembling of Textile Products</i>, <i>1</i>(2), 104–110. <a href=\"https://doi.org/10.25367/cdatp.2020.1.p104-110\">https://doi.org/10.25367/cdatp.2020.1.p104-110</a>","alphadin":"<span style=\"font-variant:small-caps;\">Görmer, Daniel</span> ; <span style=\"font-variant:small-caps;\">Störmer, Jannik</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: The influence of thermal after-treatment on the adhesion of 3D prints on textile fabrics. In: <i>Communications in Development and Assembling of Textile Products</i> Bd. 1 (2020), Nr. 2, S. 104–110","ieee":"D. Görmer, J. Störmer, and A. Ehrmann, “The influence of thermal after-treatment on the adhesion of 3D prints on textile fabrics,” <i>Communications in Development and Assembling of Textile Products</i>, vol. 1, no. 2, pp. 104–110, 2020."},"status":"public","issue":"2","publication":"Communications in Development and Assembling of Textile Products","publication_status":"published","urn":"urn:nbn:de:hbz:bi10-6908","keyword":["3D printing","warp knitted fabrics","ironing","thermal after-treatment","adhesion","nozzle-textile distance"],"type":"journal_article","publication_identifier":{"issn":["2701-939X"]},"file":[{"access_level":"open_access","file_id":"691","relation":"main_file","file_name":"_2020_Görmer_CDATP1_104-110.pdf","file_size":1482945,"content_type":"application/pdf","date_updated":"2021-01-03T18:07:06Z","success":1,"date_created":"2021-01-03T18:07:06Z","creator":"aehrmann"}],"has_accepted_license":"1","oa":"1","user_id":"220548","title":"The influence of thermal after-treatment on the adhesion of 3D prints on textile fabrics","file_date_updated":"2021-01-03T18:07:06Z","article_type":"original","date_created":"2021-01-03T18:07:32Z","volume":1,"quality_controlled":"1","department":[{"_id":"103"}]},{"urn":"urn:nbn:de:hbz:bi10-6968","keyword":["microsatellites","3D printing","polymer","metal","spacecraft","temperature","irradiation"],"publication":"AIMS Materials Science","issue":"6","publication_status":"published","main_file_link":[{"url":"https://www.aimspress.com/article/doi/10.3934/matersci.2020.6.926","open_access":"1"}],"user_id":"243110","oa":"1","has_accepted_license":"1","file":[{"relation":"main_file","file_id":"697","access_level":"open_access","creator":"aehrmann","date_created":"2021-01-03T18:15:40Z","date_updated":"2021-01-03T18:15:40Z","success":1,"content_type":"application/pdf","file_size":1244875,"file_name":"_2020_Blachowicz_AIMSMaterSci7_926-938.pdf"}],"publication_identifier":{"issn":["2372-0484"]},"type":"journal_article","volume":7,"date_created":"2021-01-03T18:17:38Z","title":"3D printing for microsatellites-material requirements and recent developments","file_date_updated":"2021-01-03T18:15:40Z","article_type":"review","department":[{"_id":"103"}],"quality_controlled":"1","language":[{"iso":"eng"}],"_id":"696","year":"2020","date_updated":"2026-03-17T15:29:35Z","page":"926-938","doi":"10.3934/matersci.2020.6.926","intvolume":"         7","status":"public","citation":{"apa":"Blachowicz, T., Pająk, K., Recha, P., &#38; Ehrmann, A. (2020). 3D printing for microsatellites-material requirements and recent developments. <i>AIMS Materials Science</i>, <i>7</i>(6), 926–938. <a href=\"https://doi.org/10.3934/matersci.2020.6.926\">https://doi.org/10.3934/matersci.2020.6.926</a>","bibtex":"@article{Blachowicz_Pająk_Recha_Ehrmann_2020, title={3D printing for microsatellites-material requirements and recent developments}, volume={7}, DOI={<a href=\"https://doi.org/10.3934/matersci.2020.6.926\">10.3934/matersci.2020.6.926</a>}, number={6}, journal={AIMS Materials Science}, author={Blachowicz, Tomasz and Pająk, Kamila and Recha, Przemysław and Ehrmann, Andrea}, year={2020}, pages={926–938} }","alphadin":"<span style=\"font-variant:small-caps;\">Blachowicz, Tomasz</span> ; <span style=\"font-variant:small-caps;\">Pająk, Kamila</span> ; <span style=\"font-variant:small-caps;\">Recha, Przemysław</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: 3D printing for microsatellites-material requirements and recent developments. In: <i>AIMS Materials Science</i> Bd. 7 (2020), Nr. 6, S. 926–938","ieee":"T. Blachowicz, K. Pająk, P. Recha, and A. Ehrmann, “3D printing for microsatellites-material requirements and recent developments,” <i>AIMS Materials Science</i>, vol. 7, no. 6, pp. 926–938, 2020.","ama":"Blachowicz T, Pająk K, Recha P, Ehrmann A. 3D printing for microsatellites-material requirements and recent developments. <i>AIMS Materials Science</i>. 2020;7(6):926-938. doi:<a href=\"https://doi.org/10.3934/matersci.2020.6.926\">10.3934/matersci.2020.6.926</a>","mla":"Blachowicz, Tomasz, et al. “3D Printing for Microsatellites-Material Requirements and Recent Developments.” <i>AIMS Materials Science</i>, vol. 7, no. 6, 2020, pp. 926–38, doi:<a href=\"https://doi.org/10.3934/matersci.2020.6.926\">10.3934/matersci.2020.6.926</a>.","short":"T. Blachowicz, K. Pająk, P. Recha, A. Ehrmann, AIMS Materials Science 7 (2020) 926–938.","chicago":"Blachowicz, Tomasz, Kamila Pająk, Przemysław Recha, and Andrea Ehrmann. “3D Printing for Microsatellites-Material Requirements and Recent Developments.” <i>AIMS Materials Science</i> 7, no. 6 (2020): 926–38. <a href=\"https://doi.org/10.3934/matersci.2020.6.926\">https://doi.org/10.3934/matersci.2020.6.926</a>."},"author":[{"first_name":"Tomasz","last_name":"Blachowicz","full_name":"Blachowicz, Tomasz"},{"first_name":"Kamila","full_name":"Pająk, Kamila","last_name":"Pająk"},{"last_name":"Recha","full_name":"Recha, Przemysław","first_name":"Przemysław"},{"id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/160215476","first_name":"Andrea","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann"}]},{"language":[{"iso":"eng"}],"_id":"658","date_updated":"2026-03-17T15:29:32Z","author":[{"full_name":"Blachowicz, Tomasz","last_name":"Blachowicz","first_name":"Tomasz"},{"id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/160647737","first_name":"Andrea","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann"}],"citation":{"alphadin":"<span style=\"font-variant:small-caps;\">Blachowicz, Tomasz</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: 3D Printed MEMS Technology—Recent Developments and Applications. In: <i>Micromachines</i> Bd. 11 (2020), Nr. 4","apa":"Blachowicz, T., &#38; Ehrmann, A. (2020). 3D Printed MEMS Technology—Recent Developments and Applications. <i>Micromachines</i>, <i>11</i>(4). <a href=\"https://doi.org/10.3390/mi11040434\">https://doi.org/10.3390/mi11040434</a>","bibtex":"@article{Blachowicz_Ehrmann_2020, title={3D Printed MEMS Technology—Recent Developments and Applications}, volume={11}, DOI={<a href=\"https://doi.org/10.3390/mi11040434\">10.3390/mi11040434</a>}, number={4434}, journal={Micromachines}, author={Blachowicz, Tomasz and Ehrmann, Andrea}, year={2020} }","ieee":"T. Blachowicz and A. Ehrmann, “3D Printed MEMS Technology—Recent Developments and Applications,” <i>Micromachines</i>, vol. 11, no. 4, 2020.","mla":"Blachowicz, Tomasz, and Andrea Ehrmann. “3D Printed MEMS Technology—Recent Developments and Applications.” <i>Micromachines</i>, vol. 11, no. 4, 434, 2020, doi:<a href=\"https://doi.org/10.3390/mi11040434\">10.3390/mi11040434</a>.","ama":"Blachowicz T, Ehrmann A. 3D Printed MEMS Technology—Recent Developments and Applications. <i>Micromachines</i>. 2020;11(4). doi:<a href=\"https://doi.org/10.3390/mi11040434\">10.3390/mi11040434</a>","short":"T. Blachowicz, A. Ehrmann, Micromachines 11 (2020).","chicago":"Blachowicz, Tomasz, and Andrea Ehrmann. “3D Printed MEMS Technology—Recent Developments and Applications.” <i>Micromachines</i> 11, no. 4 (2020). <a href=\"https://doi.org/10.3390/mi11040434\">https://doi.org/10.3390/mi11040434</a>."},"issue":"4","publication_status":"published","urn":"urn:nbn:de:hbz:bi10-6587","keyword":["3D printing","microelectromechanical systems (MEMS)","microelectronics","microfluidics","microsensors","microactuators"],"main_file_link":[{"open_access":"1"}],"oa":"1","has_accepted_license":"1","article_type":"review","article_number":"434","year":"2020","intvolume":"        11","doi":"10.3390/mi11040434","status":"public","publication":"Micromachines","user_id":"243110","type":"journal_article","publication_identifier":{"issn":["2072-666X"]},"file":[{"file_name":"_2020_Blachowicz_Micromachines11_434_corr.pdf","file_size":3080981,"content_type":"application/pdf","success":1,"date_updated":"2021-01-03T16:34:11Z","date_created":"2021-01-03T16:34:11Z","creator":"aehrmann","access_level":"open_access","file_id":"659","relation":"main_file"}],"volume":11,"title":"3D Printed MEMS Technology—Recent Developments and Applications","file_date_updated":"2021-01-03T16:34:11Z","date_created":"2021-01-03T16:34:38Z","funded_apc":"1","department":[{"_id":"103"}],"quality_controlled":"1"},{"date_created":"2021-01-03T13:31:12Z","title":"Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment","article_type":"original","volume":66,"quality_controlled":"1","department":[{"_id":"103"}],"keyword":["3D printing","finishing treatment","fused deposition modelling","surface texture","mechanical properties"],"issue":"2","publication_status":"published","publication":"Strojniški vestnik – Journal of Mechanical Engineering","type":"journal_article","publication_identifier":{"issn":["0039-2480"]},"user_id":"220548","doi":"10.5545/sv-jme.2019.6322","intvolume":"        66","date_updated":"2026-03-17T15:29:27Z","page":"105-113","author":[{"full_name":"Kozior, Tomasz","last_name":"Kozior","first_name":"Tomasz"},{"last_name":"Mamun","full_name":"Mamun, Al","first_name":"Al"},{"first_name":"Marah","last_name":"Trabelsi","full_name":"Trabelsi, Marah"},{"first_name":"Lilia","full_name":"Sabantina, Lilia","last_name":"Sabantina"},{"orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann","first_name":"Andrea","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/161441232","id":"223776"}],"citation":{"bibtex":"@article{Kozior_Mamun_Trabelsi_Sabantina_Ehrmann_2020, title={Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment}, volume={66}, DOI={<a href=\"https://doi.org/10.5545/sv-jme.2019.6322\">10.5545/sv-jme.2019.6322</a>}, number={2}, journal={Strojniški vestnik – Journal of Mechanical Engineering}, author={Kozior, Tomasz and Mamun, Al and Trabelsi, Marah and Sabantina, Lilia and Ehrmann, Andrea}, year={2020}, pages={105–113} }","apa":"Kozior, T., Mamun, A., Trabelsi, M., Sabantina, L., &#38; Ehrmann, A. (2020). Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment. <i>Strojniški Vestnik – Journal of Mechanical Engineering</i>, <i>66</i>(2), 105–113. <a href=\"https://doi.org/10.5545/sv-jme.2019.6322\">https://doi.org/10.5545/sv-jme.2019.6322</a>","alphadin":"<span style=\"font-variant:small-caps;\">Kozior, Tomasz</span> ; <span style=\"font-variant:small-caps;\">Mamun, Al</span> ; <span style=\"font-variant:small-caps;\">Trabelsi, Marah</span> ; <span style=\"font-variant:small-caps;\">Sabantina, Lilia</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment. In: <i>Strojniški vestnik – Journal of Mechanical Engineering</i> Bd. 66 (2020), Nr. 2, S. 105–113","ieee":"T. Kozior, A. Mamun, M. Trabelsi, L. Sabantina, and A. Ehrmann, “Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment,” <i>Strojniški vestnik – Journal of Mechanical Engineering</i>, vol. 66, no. 2, pp. 105–113, 2020.","ama":"Kozior T, Mamun A, Trabelsi M, Sabantina L, Ehrmann A. Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment. <i>Strojniški vestnik – Journal of Mechanical Engineering</i>. 2020;66(2):105-113. doi:<a href=\"https://doi.org/10.5545/sv-jme.2019.6322\">10.5545/sv-jme.2019.6322</a>","mla":"Kozior, Tomasz, et al. “Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment.” <i>Strojniški Vestnik – Journal of Mechanical Engineering</i>, vol. 66, no. 2, 2020, pp. 105–13, doi:<a href=\"https://doi.org/10.5545/sv-jme.2019.6322\">10.5545/sv-jme.2019.6322</a>.","chicago":"Kozior, Tomasz, Al Mamun, Marah Trabelsi, Lilia Sabantina, and Andrea Ehrmann. “Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment.” <i>Strojniški Vestnik – Journal of Mechanical Engineering</i> 66, no. 2 (2020): 105–13. <a href=\"https://doi.org/10.5545/sv-jme.2019.6322\">https://doi.org/10.5545/sv-jme.2019.6322</a>.","short":"T. Kozior, A. Mamun, M. Trabelsi, L. Sabantina, A. Ehrmann, Strojniški Vestnik – Journal of Mechanical Engineering 66 (2020) 105–113."},"status":"public","_id":"625","year":"2020","language":[{"iso":"eng"}]},{"department":[{"_id":"103"}],"quality_controlled":"1","date_created":"2019-10-06T09:10:09Z","title":"3D Printing: An Innovative Technology for Customised Shoe Manufacturing","user_id":"220548","publication_identifier":{"isbn":["978-3-030-29040-5"]},"type":"conference","keyword":["Personalisation","3D scanning","3D printing","Apparel industry","Footwear","Design optimisation"],"publication":"Progress in Digital and Physical Manufacturing","publication_status":"published","series_title":"Lecture Notes in Mechanical Engineering","status":"public","conference":{"name":"Progress in Digital and Physical Manufacturing, ProDPM 2019","location":"Leiria, Portugal","start_date":"2019-10-02","end_date":"2019-10-04"},"citation":{"short":"T. Spahiu, E. Piperi, A. Ehrmann, H.A. Almeida, R.M.T. Ascenso, L.C. Vitorino, in: H.A. Almeida, J.C. Vasco (Eds.), Progress in Digital and Physical Manufacturing, Springer, 2020, pp. 171–180.","chicago":"Spahiu, Tatjana, Erald Piperi, Andrea Ehrmann, Henrique A. Almeida, Rita M. T. Ascenso, and Liliana C. Vitorino. “3D Printing: An Innovative Technology for Customised Shoe Manufacturing.” In <i>Progress in Digital and Physical Manufacturing</i>, edited by Henrique A. Almeida and Joel C. Vasco, 171–80. Lecture Notes in Mechanical Engineering. Springer, 2020. <a href=\"https://doi.org/10.1007/978-3-030-29041-2_22\">https://doi.org/10.1007/978-3-030-29041-2_22</a>.","mla":"Spahiu, Tatjana, et al. “3D Printing: An Innovative Technology for Customised Shoe Manufacturing.” <i>Progress in Digital and Physical Manufacturing</i>, edited by Henrique A. Almeida and Joel C. Vasco, Springer, 2020, pp. 171–80, doi:<a href=\"https://doi.org/10.1007/978-3-030-29041-2_22\">10.1007/978-3-030-29041-2_22</a>.","ama":"Spahiu T, Piperi E, Ehrmann A, Almeida HA, Ascenso RMT, Vitorino LC. 3D Printing: An Innovative Technology for Customised Shoe Manufacturing. In: Almeida HA, Vasco JC, eds. <i>Progress in Digital and Physical Manufacturing</i>. Lecture Notes in Mechanical Engineering. Springer; 2020:171-180. doi:<a href=\"https://doi.org/10.1007/978-3-030-29041-2_22\">10.1007/978-3-030-29041-2_22</a>","ieee":"T. Spahiu, E. Piperi, A. Ehrmann, H. A. Almeida, R. M. T. Ascenso, and L. C. Vitorino, “3D Printing: An Innovative Technology for Customised Shoe Manufacturing,” in <i>Progress in Digital and Physical Manufacturing</i>, Leiria, Portugal, 2020, pp. 171–180.","alphadin":"<span style=\"font-variant:small-caps;\">Spahiu, Tatjana</span> ; <span style=\"font-variant:small-caps;\">Piperi, Erald</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span> ; <span style=\"font-variant:small-caps;\">Almeida, Henrique A.</span> ; <span style=\"font-variant:small-caps;\">Ascenso, Rita M. T.</span> ; <span style=\"font-variant:small-caps;\">Vitorino, Liliana C.</span>: 3D Printing: An Innovative Technology for Customised Shoe Manufacturing. In: <span style=\"font-variant:small-caps;\">Almeida, H. A.</span> ; <span style=\"font-variant:small-caps;\">Vasco, J. C.</span> (Hrsg.): <i>Progress in Digital and Physical Manufacturing</i>, <i>Lecture Notes in Mechanical Engineering</i> : Springer, 2020, S. 171–180","bibtex":"@inproceedings{Spahiu_Piperi_Ehrmann_Almeida_Ascenso_Vitorino_2020, series={Lecture Notes in Mechanical Engineering}, title={3D Printing: An Innovative Technology for Customised Shoe Manufacturing}, DOI={<a href=\"https://doi.org/10.1007/978-3-030-29041-2_22\">10.1007/978-3-030-29041-2_22</a>}, booktitle={Progress in Digital and Physical Manufacturing}, publisher={Springer}, author={Spahiu, Tatjana and Piperi, Erald and Ehrmann, Andrea and Almeida, Henrique A. and Ascenso, Rita M. T. and Vitorino, Liliana C.}, editor={Almeida, Henrique A. and Vasco, Joel C.Editors}, year={2020}, pages={171–180}, collection={Lecture Notes in Mechanical Engineering} }","apa":"Spahiu, T., Piperi, E., Ehrmann, A., Almeida, H. A., Ascenso, R. M. T., &#38; Vitorino, L. C. (2020). 3D Printing: An Innovative Technology for Customised Shoe Manufacturing. In H. A. Almeida &#38; J. C. Vasco (Eds.), <i>Progress in Digital and Physical Manufacturing</i> (pp. 171–180). Leiria, Portugal: Springer. <a href=\"https://doi.org/10.1007/978-3-030-29041-2_22\">https://doi.org/10.1007/978-3-030-29041-2_22</a>"},"author":[{"last_name":"Spahiu","full_name":"Spahiu, Tatjana","first_name":"Tatjana"},{"last_name":"Piperi","full_name":"Piperi, Erald","first_name":"Erald"},{"orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann","first_name":"Andrea","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/161441782"},{"first_name":"Henrique A.","last_name":"Almeida","full_name":"Almeida, Henrique A."},{"full_name":"Ascenso, Rita M. T.","last_name":"Ascenso","first_name":"Rita M. T."},{"last_name":"Vitorino","full_name":"Vitorino, Liliana C.","first_name":"Liliana C."}],"date_updated":"2026-03-17T15:29:24Z","page":"171-180","publisher":"Springer","doi":"10.1007/978-3-030-29041-2_22","language":[{"iso":"eng"}],"_id":"597","editor":[{"first_name":"Henrique A.","last_name":"Almeida","full_name":"Almeida, Henrique A."},{"first_name":"Joel C.","last_name":"Vasco","full_name":"Vasco, Joel C."}],"year":"2020"}]