[{"language":[{"iso":"eng"}],"_id":"5037","year":"2024","status":"public","citation":{"mla":"Tuvshinbayar, Khorolsuren, et al. “Comparison of FDM and SLA Printing on Woven Fabrics.” <i>Communications in Development and Assembling of Textile Products</i>, vol. 5, no. 2, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden, 2024, pp. 169–77, doi:<a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">10.25367/cdatp.2024.5.p169-177</a>.","ama":"Tuvshinbayar K, Mpofu NS, Berger T, Storck JL, Büsgen A, Ehrmann A. Comparison of FDM and SLA printing on woven fabrics. <i>Communications in Development and Assembling of Textile Products</i>. 2024;5(2):169-177. doi:<a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">10.25367/cdatp.2024.5.p169-177</a>","short":"K. Tuvshinbayar, N.S. Mpofu, T. Berger, J.L. Storck, A. Büsgen, A. Ehrmann, Communications in Development and Assembling of Textile Products 5 (2024) 169–177.","chicago":"Tuvshinbayar, Khorolsuren, Nonsikelelo Sheron Mpofu, Thomas Berger, Jan Lukas Storck, Alexander Büsgen, and Andrea Ehrmann. “Comparison of FDM and SLA Printing on Woven Fabrics.” <i>Communications in Development and Assembling of Textile Products</i> 5, no. 2 (2024): 169–77. <a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">https://doi.org/10.25367/cdatp.2024.5.p169-177</a>.","alphadin":"<span style=\"font-variant:small-caps;\">Tuvshinbayar, Khorolsuren</span> ; <span style=\"font-variant:small-caps;\">Mpofu, Nonsikelelo Sheron</span> ; <span style=\"font-variant:small-caps;\">Berger, Thomas</span> ; <span style=\"font-variant:small-caps;\">Storck, Jan Lukas</span> ; <span style=\"font-variant:small-caps;\">Büsgen, Alexander</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Comparison of FDM and SLA printing on woven fabrics. In: <i>Communications in Development and Assembling of Textile Products</i> Bd. 5, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden (2024), Nr. 2, S. 169–177","bibtex":"@article{Tuvshinbayar_Mpofu_Berger_Storck_Büsgen_Ehrmann_2024, title={Comparison of FDM and SLA printing on woven fabrics}, volume={5}, DOI={<a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">10.25367/cdatp.2024.5.p169-177</a>}, number={2}, journal={Communications in Development and Assembling of Textile Products}, publisher={Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden}, author={Tuvshinbayar, Khorolsuren and Mpofu, Nonsikelelo Sheron and Berger, Thomas and Storck, Jan Lukas and Büsgen, Alexander and Ehrmann, Andrea}, year={2024}, pages={169–177} }","apa":"Tuvshinbayar, K., Mpofu, N. S., Berger, T., Storck, J. L., Büsgen, A., &#38; Ehrmann, A. (2024). Comparison of FDM and SLA printing on woven fabrics. <i>Communications in Development and Assembling of Textile Products</i>, <i>5</i>(2), 169–177. <a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">https://doi.org/10.25367/cdatp.2024.5.p169-177</a>","ieee":"K. Tuvshinbayar, N. S. Mpofu, T. Berger, J. L. Storck, A. Büsgen, and A. Ehrmann, “Comparison of FDM and SLA printing on woven fabrics,” <i>Communications in Development and Assembling of Textile Products</i>, vol. 5, no. 2, pp. 169–177, 2024."},"author":[{"orcid":"0009-0001-7114-1842","full_name":"Tuvshinbayar, Khorolsuren","last_name":"Tuvshinbayar","first_name":"Khorolsuren","id":"222971"},{"full_name":"Mpofu, Nonsikelelo Sheron","last_name":"Mpofu","first_name":"Nonsikelelo Sheron"},{"first_name":"Thomas","last_name":"Berger","full_name":"Berger, Thomas"},{"first_name":"Jan Lukas","id":"221157","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0002-6841-8791/work/169303729","orcid":"0000-0002-6841-8791","full_name":"Storck, Jan Lukas","last_name":"Storck"},{"first_name":"Alexander","full_name":"Büsgen, Alexander","last_name":"Büsgen"},{"first_name":"Andrea","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/169303732","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann"}],"date_updated":"2026-03-17T15:29:12Z","page":"169-177","publisher":"Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden","doi":"10.25367/cdatp.2024.5.p169-177","intvolume":"         5","user_id":"220548","oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"has_accepted_license":"1","file":[{"content_type":"application/pdf","file_name":"_2024_Tuvshinbayar_CDATP5_169-177.pdf","file_size":1725005,"date_created":"2024-10-10T15:56:18Z","creator":"aehrmann","success":1,"date_updated":"2024-10-10T15:56:18Z","access_level":"open_access","relation":"main_file","file_id":"5038"}],"type":"journal_article","publication_identifier":{"eissn":["2701-939X"]},"keyword":["3D printing","fused deposition modeling (FDM)","stereolithography (SLA)","adhesion","textile fabric","woven fabric"],"urn":"urn:nbn:de:hbz:bi10-50370","publication_status":"published","issue":"2","publication":"Communications in Development and Assembling of Textile Products","quality_controlled":"1","volume":5,"date_created":"2024-10-10T15:57:02Z","file_date_updated":"2024-10-10T15:56:18Z","title":"Comparison of FDM and SLA printing on woven fabrics","article_type":"original"},{"year":"2024","_id":"4870","language":[{"iso":"eng"}],"intvolume":"        67","doi":"10.14502/tekstilec.67.2024080","publisher":"University of Ljubljana","page":"1-14","date_updated":"2026-03-17T15:29:08Z","citation":{"ieee":"T. Kozior, N. S. Mpofu, J. Fiedler, and A. Ehrmann, “Influence of Textile Substrates on the Adhesion of PJM-Printed MED610 and Surface Morphology,” <i>Tekstilec</i>, vol. 67, pp. 1–14, 2024.","bibtex":"@article{Kozior_Mpofu_Fiedler_Ehrmann_2024, title={Influence of Textile Substrates on the Adhesion of PJM-Printed MED610 and Surface Morphology}, volume={67}, DOI={<a href=\"https://doi.org/10.14502/tekstilec.67.2024080\">10.14502/tekstilec.67.2024080</a>}, journal={Tekstilec}, publisher={University of Ljubljana}, author={Kozior, Tomasz and Mpofu, Nonsikelelo Sheron and Fiedler, Johannes and Ehrmann, Andrea}, year={2024}, pages={1–14} }","apa":"Kozior, T., Mpofu, N. S., Fiedler, J., &#38; Ehrmann, A. (2024). Influence of Textile Substrates on the Adhesion of PJM-Printed MED610 and Surface Morphology. <i>Tekstilec</i>, <i>67</i>, 1–14. <a href=\"https://doi.org/10.14502/tekstilec.67.2024080\">https://doi.org/10.14502/tekstilec.67.2024080</a>","alphadin":"<span style=\"font-variant:small-caps;\">Kozior, Tomasz</span> ; <span style=\"font-variant:small-caps;\">Mpofu, Nonsikelelo Sheron</span> ; <span style=\"font-variant:small-caps;\">Fiedler, Johannes</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Influence of Textile Substrates on the Adhesion of PJM-Printed MED610 and Surface Morphology. In: <i>Tekstilec</i> Bd. 67, University of Ljubljana (2024), S. 1–14","chicago":"Kozior, Tomasz, Nonsikelelo Sheron Mpofu, Johannes Fiedler, and Andrea Ehrmann. “Influence of Textile Substrates on the Adhesion of PJM-Printed MED610 and Surface Morphology.” <i>Tekstilec</i> 67 (2024): 1–14. <a href=\"https://doi.org/10.14502/tekstilec.67.2024080\">https://doi.org/10.14502/tekstilec.67.2024080</a>.","short":"T. Kozior, N.S. Mpofu, J. Fiedler, A. Ehrmann, Tekstilec 67 (2024) 1–14.","ama":"Kozior T, Mpofu NS, Fiedler J, Ehrmann A. Influence of Textile Substrates on the Adhesion of PJM-Printed MED610 and Surface Morphology. <i>Tekstilec</i>. 2024;67:1-14. doi:<a href=\"https://doi.org/10.14502/tekstilec.67.2024080\">10.14502/tekstilec.67.2024080</a>","mla":"Kozior, Tomasz, et al. “Influence of Textile Substrates on the Adhesion of PJM-Printed MED610 and Surface Morphology.” <i>Tekstilec</i>, vol. 67, University of Ljubljana, 2024, pp. 1–14, doi:<a href=\"https://doi.org/10.14502/tekstilec.67.2024080\">10.14502/tekstilec.67.2024080</a>."},"author":[{"last_name":"Kozior","full_name":"Kozior, Tomasz","first_name":"Tomasz"},{"last_name":"Mpofu","full_name":"Mpofu, Nonsikelelo Sheron","first_name":"Nonsikelelo Sheron"},{"first_name":"Johannes","last_name":"Fiedler","full_name":"Fiedler, Johannes"},{"orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann","first_name":"Andrea","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/165515954"}],"status":"public","publication_status":"published","publication":"Tekstilec","keyword":["material extrusion","MEX","adhesion","fused deposition modelling","FDM"],"urn":"urn:nbn:de:hbz:bi10-48707","file":[{"access_level":"open_access","file_id":"4871","relation":"main_file","file_name":"_2024_Kozior_Tekstilec67_online-first.pdf","file_size":7413843,"content_type":"application/pdf","success":1,"date_updated":"2024-08-14T21:06:03Z","creator":"aehrmann","date_created":"2024-08-14T21:06:03Z"}],"type":"journal_article","publication_identifier":{"eissn":["2350-3696"],"issn":["0351-3386"]},"tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"has_accepted_license":"1","project":[{"_id":"0ec202b7-cd76-11ed-89f4-a9e1a6dbdaa7","name":"Institut für Technische Energie-Systeme"}],"oa":"1","user_id":"220548","file_date_updated":"2024-08-14T21:06:03Z","article_type":"original","title":"Influence of Textile Substrates on the Adhesion of PJM-Printed MED610 and Surface Morphology","date_created":"2024-08-14T21:07:14Z","volume":67,"quality_controlled":"1"},{"user_id":"220548","main_file_link":[{"url":"https://journals.uni-lj.si/tekstilec/article/view/14630","open_access":"1"}],"publication_identifier":{"issn":["0351-3386"],"eissn":["2350-3696"]},"file":[{"access_level":"open_access","relation":"main_file","file_id":"3756","content_type":"application/pdf","file_name":"_2023_Cakar_Tekstilec66_online-first.pdf","file_size":976095,"creator":"aehrmann","date_created":"2023-11-25T11:06:49Z","success":1,"date_updated":"2023-11-25T11:06:49Z"}],"type":"journal_article","has_accepted_license":"1","tmp":{"short":"CC BY-SA (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-sa/4.0/legalcode","name":"Creative Commons Attribution-ShareAlike 4.0 International Public License (CC BY-SA 4.0)","image":"/images/cc_by_sa.png"},"oa":"1","publication":"Tekstilec","publication_status":"published","keyword":["3D printing","fused deposition modeling (FDM)","flexible polymer","stab-resistance","VPAM-KDIW"],"urn":"urn:nbn:de:hbz:bi10-37551","quality_controlled":"1","volume":66,"article_type":"original","title":"Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites","file_date_updated":"2023-11-25T11:06:49Z","date_created":"2023-11-25T11:07:18Z","language":[{"iso":"eng"}],"year":"2023","_id":"3755","status":"public","citation":{"ieee":"S. Cakar and A. Ehrmann, “Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites,” <i>Tekstilec</i>, vol. 66, pp. 211–217, 2023.","apa":"Cakar, S., &#38; Ehrmann, A. (2023). Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites. <i>Tekstilec</i>, <i>66</i>, 211–217. <a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">https://doi.org/10.14502/tekstilec.66.2023050</a>","bibtex":"@article{Cakar_Ehrmann_2023, title={Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites}, volume={66}, DOI={<a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">10.14502/tekstilec.66.2023050</a>}, journal={Tekstilec}, publisher={University of Ljubljana}, author={Cakar, Siver and Ehrmann, Andrea}, year={2023}, pages={211–217} }","alphadin":"<span style=\"font-variant:small-caps;\">Cakar, Siver</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites. In: <i>Tekstilec</i> Bd. 66, University of Ljubljana (2023), S. 211–217","chicago":"Cakar, Siver, and Andrea Ehrmann. “Adhesion and Stab-Resistant Properties of FDM-Printed Polymer/Textile Composites.” <i>Tekstilec</i> 66 (2023): 211–17. <a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">https://doi.org/10.14502/tekstilec.66.2023050</a>.","short":"S. Cakar, A. Ehrmann, Tekstilec 66 (2023) 211–217.","ama":"Cakar S, Ehrmann A. Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites. <i>Tekstilec</i>. 2023;66:211-217. doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">10.14502/tekstilec.66.2023050</a>","mla":"Cakar, Siver, and Andrea Ehrmann. “Adhesion and Stab-Resistant Properties of FDM-Printed Polymer/Textile Composites.” <i>Tekstilec</i>, vol. 66, University of Ljubljana, 2023, pp. 211–17, doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">10.14502/tekstilec.66.2023050</a>."},"author":[{"first_name":"Siver","last_name":"Cakar","full_name":"Cakar, Siver"},{"orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann","first_name":"Andrea","id":"223776"}],"publisher":"University of Ljubljana","page":"211-217","date_updated":"2026-03-17T15:28:49Z","intvolume":"        66","doi":"10.14502/tekstilec.66.2023050"},{"_id":"2912","language":[{"iso":"eng"}],"date_updated":"2026-03-17T15:28:38Z","publisher":"University of Ljubljana","author":[{"last_name":"Erdem","full_name":"Erdem, Göksal","first_name":"Göksal"},{"full_name":"Grothe, Timo","orcid":"0000-0002-9099-4277","last_name":"Grothe","id":"221330","first_name":"Timo"},{"orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann","first_name":"Andrea","id":"223776"}],"citation":{"chicago":"Erdem, Göksal, Timo Grothe, and Andrea Ehrmann. “Adhesion of New Thermoplastic Materials Printed on Textile Fabrics.” <i>Tekstilec</i> 66, no. 1 (2023): 57–63. <a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">https://doi.org/10.14502/tekstilec.66.2023012</a>.","short":"G. Erdem, T. Grothe, A. Ehrmann, Tekstilec 66 (2023) 57–63.","ama":"Erdem G, Grothe T, Ehrmann A. Adhesion of new thermoplastic materials printed on textile fabrics. <i>Tekstilec</i>. 2023;66(1):57-63. doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">10.14502/tekstilec.66.2023012</a>","mla":"Erdem, Göksal, et al. “Adhesion of New Thermoplastic Materials Printed on Textile Fabrics.” <i>Tekstilec</i>, vol. 66, no. 1, University of Ljubljana, 2023, pp. 57–63, doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">10.14502/tekstilec.66.2023012</a>.","ieee":"G. Erdem, T. Grothe, and A. Ehrmann, “Adhesion of new thermoplastic materials printed on textile fabrics,” <i>Tekstilec</i>, vol. 66, no. 1, pp. 57–63, 2023.","bibtex":"@article{Erdem_Grothe_Ehrmann_2023, title={Adhesion of new thermoplastic materials printed on textile fabrics}, volume={66}, DOI={<a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">10.14502/tekstilec.66.2023012</a>}, number={1}, journal={Tekstilec}, publisher={University of Ljubljana}, author={Erdem, Göksal and Grothe, Timo and Ehrmann, Andrea}, year={2023}, pages={57–63} }","apa":"Erdem, G., Grothe, T., &#38; Ehrmann, A. (2023). Adhesion of new thermoplastic materials printed on textile fabrics. <i>Tekstilec</i>, <i>66</i>(1), 57–63. <a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">https://doi.org/10.14502/tekstilec.66.2023012</a>","alphadin":"<span style=\"font-variant:small-caps;\">Erdem, Göksal</span> ; <span style=\"font-variant:small-caps;\">Grothe, Timo</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Adhesion of new thermoplastic materials printed on textile fabrics. In: <i>Tekstilec</i> Bd. 66, University of Ljubljana (2023), Nr. 1, S. 57–63"},"urn":"urn:nbn:de:hbz:bi10-29124","keyword":["3D printing","fused deposition modeling (FDM)","high-performance polymers","high-performance polyolefin","fiber-reinforced polymers"],"issue":"1","publication_status":"published","tmp":{"short":"CC BY-SA (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-sa/4.0/legalcode","name":"Creative Commons Attribution-ShareAlike 4.0 International Public License (CC BY-SA 4.0)","image":"/images/cc_by_sa.png"},"oa":"1","has_accepted_license":"1","main_file_link":[{"open_access":"1","url":"https://doi.org/10.14502/tekstilec.66.2023012"}],"article_type":"original","year":"2023","doi":"10.14502/tekstilec.66.2023012","intvolume":"        66","page":"57-63","status":"public","publication":"Tekstilec","publication_identifier":{"eissn":["2350-3696"],"issn":["0351-3386"]},"file":[{"relation":"main_file","file_id":"3483","access_level":"open_access","date_updated":"2023-08-25T20:17:39Z","success":1,"creator":"aehrmann","date_created":"2023-08-25T20:17:39Z","file_size":989560,"file_name":"_2023_Göksal_Tekstilec66_57-63.pdf","content_type":"application/pdf"}],"type":"journal_article","user_id":"245590","date_created":"2023-05-12T12:28:41Z","title":"Adhesion of new thermoplastic materials printed on textile fabrics","file_date_updated":"2023-08-25T20:17:39Z","volume":66,"quality_controlled":"1"},{"publication_status":"published","issue":"1","publication":"Communications in Development and Assembling of Textile Products","urn":"urn:nbn:de:hbz:bi10-27697","keyword":["textile fabrics","fused deposition modeling (FDM)","composite","thermoplastic polyurethane (TPU)","cotton","aramid"],"user_id":"245590","file":[{"content_type":"application/pdf","file_name":"_2023_Özev_CDATP4_88-94.pdf","file_size":641229,"date_created":"2023-04-18T08:50:03Z","creator":"aehrmann","success":1,"date_updated":"2023-04-18T08:50:03Z","access_level":"open_access","relation":"main_file","file_id":"2770"}],"type":"journal_article","publication_identifier":{"eissn":["2701-939X"]},"has_accepted_license":"1","tmp":{"name":"Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)","image":"/images/cc_by_nc_nd.png","short":"CC BY-NC-ND (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-nc-nd/4.0/legalcode"},"oa":"1","volume":4,"title":"Sandwiching textiles with FDM Printing","article_type":"original","file_date_updated":"2023-04-18T08:50:03Z","date_created":"2023-04-18T08:50:29Z","quality_controlled":"1","language":[{"iso":"eng"}],"year":"2023","_id":"2769","publisher":"Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden","page":"88-94","date_updated":"2026-03-17T15:28:37Z","intvolume":"         4","doi":"10.25367/cdatp.2023.4.p88-94","status":"public","citation":{"ieee":"M.-S. Özev and A. Ehrmann, “Sandwiching textiles with FDM Printing,” <i>Communications in Development and Assembling of Textile Products</i>, vol. 4, no. 1, pp. 88–94, 2023.","alphadin":"<span style=\"font-variant:small-caps;\">Özev, Mahmut-Sami</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Sandwiching textiles with FDM Printing. In: <i>Communications in Development and Assembling of Textile Products</i> Bd. 4, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden (2023), Nr. 1, S. 88–94","apa":"Özev, M.-S., &#38; Ehrmann, A. (2023). Sandwiching textiles with FDM Printing. <i>Communications in Development and Assembling of Textile Products</i>, <i>4</i>(1), 88–94. <a href=\"https://doi.org/10.25367/cdatp.2023.4.p88-94\">https://doi.org/10.25367/cdatp.2023.4.p88-94</a>","bibtex":"@article{Özev_Ehrmann_2023, title={Sandwiching textiles with FDM Printing}, volume={4}, DOI={<a href=\"https://doi.org/10.25367/cdatp.2023.4.p88-94\">10.25367/cdatp.2023.4.p88-94</a>}, number={1}, journal={Communications in Development and Assembling of Textile Products}, publisher={Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden}, author={Özev, Mahmut-Sami and Ehrmann, Andrea}, year={2023}, pages={88–94} }","short":"M.-S. Özev, A. Ehrmann, Communications in Development and Assembling of Textile Products 4 (2023) 88–94.","chicago":"Özev, Mahmut-Sami, and Andrea Ehrmann. “Sandwiching Textiles with FDM Printing.” <i>Communications in Development and Assembling of Textile Products</i> 4, no. 1 (2023): 88–94. <a href=\"https://doi.org/10.25367/cdatp.2023.4.p88-94\">https://doi.org/10.25367/cdatp.2023.4.p88-94</a>.","mla":"Özev, Mahmut-Sami, and Andrea Ehrmann. “Sandwiching Textiles with FDM Printing.” <i>Communications in Development and Assembling of Textile Products</i>, vol. 4, no. 1, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden, 2023, pp. 88–94, doi:<a href=\"https://doi.org/10.25367/cdatp.2023.4.p88-94\">10.25367/cdatp.2023.4.p88-94</a>.","ama":"Özev M-S, Ehrmann A. Sandwiching textiles with FDM Printing. <i>Communications in Development and Assembling of Textile Products</i>. 2023;4(1):88-94. doi:<a href=\"https://doi.org/10.25367/cdatp.2023.4.p88-94\">10.25367/cdatp.2023.4.p88-94</a>"},"author":[{"full_name":"Özev, Mahmut-Sami","last_name":"Özev","first_name":"Mahmut-Sami"},{"id":"223776","first_name":"Andrea","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann"}]},{"publisher":"MDPI AG","date_updated":"2026-03-17T15:28:37Z","author":[{"full_name":"Werner, Enrico","last_name":"Werner","first_name":"Enrico"},{"first_name":"Uwe","last_name":"Güth","full_name":"Güth, Uwe"},{"first_name":"Bennet","id":"237316","last_name":"Brockhagen","full_name":"Brockhagen, Bennet"},{"last_name":"Döpke","full_name":"Döpke, Christoph","first_name":"Christoph"},{"first_name":"Andrea","id":"223776","last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea"}],"citation":{"chicago":"Werner, Enrico, Uwe Güth, Bennet Brockhagen, Christoph Döpke, and Andrea Ehrmann. “Examination of Polymer Blends by AFM Phase Images.” <i>Technologies</i> 11, no. 2 (2023). <a href=\"https://doi.org/10.3390/technologies11020056\">https://doi.org/10.3390/technologies11020056</a>.","short":"E. Werner, U. Güth, B. Brockhagen, C. Döpke, A. Ehrmann, Technologies 11 (2023).","mla":"Werner, Enrico, et al. “Examination of Polymer Blends by AFM Phase Images.” <i>Technologies</i>, vol. 11, no. 2, 56, MDPI AG, 2023, doi:<a href=\"https://doi.org/10.3390/technologies11020056\">10.3390/technologies11020056</a>.","ama":"Werner E, Güth U, Brockhagen B, Döpke C, Ehrmann A. Examination of Polymer Blends by AFM Phase Images. <i>Technologies</i>. 2023;11(2). doi:<a href=\"https://doi.org/10.3390/technologies11020056\">10.3390/technologies11020056</a>","ieee":"E. Werner, U. Güth, B. Brockhagen, C. Döpke, and A. Ehrmann, “Examination of Polymer Blends by AFM Phase Images,” <i>Technologies</i>, vol. 11, no. 2, 2023.","alphadin":"<span style=\"font-variant:small-caps;\">Werner, Enrico</span> ; <span style=\"font-variant:small-caps;\">Güth, Uwe</span> ; <span style=\"font-variant:small-caps;\">Brockhagen, Bennet</span> ; <span style=\"font-variant:small-caps;\">Döpke, Christoph</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Examination of Polymer Blends by AFM Phase Images. In: <i>Technologies</i> Bd. 11, MDPI AG (2023), Nr. 2","apa":"Werner, E., Güth, U., Brockhagen, B., Döpke, C., &#38; Ehrmann, A. (2023). Examination of Polymer Blends by AFM Phase Images. <i>Technologies</i>, <i>11</i>(2). <a href=\"https://doi.org/10.3390/technologies11020056\">https://doi.org/10.3390/technologies11020056</a>","bibtex":"@article{Werner_Güth_Brockhagen_Döpke_Ehrmann_2023, title={Examination of Polymer Blends by AFM Phase Images}, volume={11}, DOI={<a href=\"https://doi.org/10.3390/technologies11020056\">10.3390/technologies11020056</a>}, number={256}, journal={Technologies}, publisher={MDPI AG}, author={Werner, Enrico and Güth, Uwe and Brockhagen, Bennet and Döpke, Christoph and Ehrmann, Andrea}, year={2023} }"},"language":[{"iso":"eng"}],"_id":"2771","article_type":"original","publication_status":"published","issue":"2","urn":"urn:nbn:de:hbz:bi10-27710","keyword":["atomic force microscopy (AFM)","acrylonitrile butadiene styrene (ABS)","poly(lactic acid) (PLA)","fused deposition modeling (FDM)","additive manufacturing","polymer blends"],"has_accepted_license":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"oa":"1","intvolume":"        11","doi":"10.3390/technologies11020056","status":"public","article_number":"56","year":"2023","volume":11,"file_date_updated":"2023-04-18T08:51:17Z","title":"Examination of Polymer Blends by AFM Phase Images","date_created":"2023-04-18T08:51:56Z","funded_apc":"1","quality_controlled":"1","publication":"Technologies","user_id":"245590","file":[{"file_id":"2772","relation":"main_file","access_level":"open_access","success":1,"date_updated":"2023-04-18T08:51:17Z","creator":"aehrmann","date_created":"2023-04-18T08:51:17Z","file_name":"_2023_Werner_Technologies11_56.pdf","file_size":6037611,"content_type":"application/pdf"}],"type":"journal_article","publication_identifier":{"eissn":["2227-7080"]}},{"year":"2023","page":"40","intvolume":"        31","doi":"10.3390/ASEC2022-13811","conference":{"name":"The 3rd International Electronic Conference on Applied Sciences","location":"Online","end_date":"2022-12-15","start_date":"2022-12-01"},"status":"public","publication":"Proceedings of The 3rd International Electronic Conference on Applied Sciences","user_id":"220548","file":[{"date_updated":"2023-02-07T07:32:05Z","success":1,"creator":"aehrmann","date_created":"2023-02-07T07:32:05Z","file_name":"_2023_Ekinci_EngProc31_40.pdf","file_size":3784450,"content_type":"application/pdf","relation":"main_file","file_id":"2354","access_level":"open_access"}],"type":"conference","volume":31,"title":"Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing","file_date_updated":"2023-02-07T07:32:05Z","date_created":"2023-02-07T07:32:57Z","quality_controlled":"1","language":[{"iso":"eng"}],"editor":[{"last_name":"Cennamo","full_name":"Cennamo, Nunzio ","first_name":"Nunzio "},{"full_name":"Ando, Bruno ","last_name":"Ando","first_name":"Bruno "},{"first_name":"Gianrico ","last_name":"Spagnuolo","full_name":"Spagnuolo, Gianrico "},{"last_name":"Sharma","full_name":"Sharma, Anuj K.","first_name":"Anuj K."},{"first_name":"Roger ","last_name":"Narayan","full_name":"Narayan, Roger "},{"first_name":"Francesco ","last_name":"Arcadio","full_name":"Arcadio, Francesco "},{"first_name":"Maria ","last_name":"Pesavento","full_name":"Pesavento, Maria "},{"first_name":"Carlos ","last_name":"Marques","full_name":"Marques, Carlos "},{"first_name":"Letizia ","full_name":"De Maria, Letizia ","last_name":"De Maria"}],"_id":"2353","publisher":"MDPI","date_updated":"2026-03-17T15:28:32Z","place":"Basel Switzerland","author":[{"last_name":"Ekinci","full_name":"Ekinci, Burhan","first_name":"Burhan"},{"last_name":"Ehrmann","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/181737433","first_name":"Andrea"}],"citation":{"mla":"Ekinci, Burhan, and Andrea Ehrmann. “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing.” <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, edited by Nunzio  Cennamo et al., vol. 31, no. 1, MDPI, 2023, p. 40, doi:<a href=\"https://doi.org/10.3390/ASEC2022-13811\">10.3390/ASEC2022-13811</a>.","ama":"Ekinci B, Ehrmann A. Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In: Cennamo N, Ando B, Spagnuolo G, et al., eds. <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>. Vol 31. Eng. Proc. Basel Switzerland: MDPI; 2023:40. doi:<a href=\"https://doi.org/10.3390/ASEC2022-13811\">10.3390/ASEC2022-13811</a>","chicago":"Ekinci, Burhan, and Andrea Ehrmann. “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing.” In <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, edited by Nunzio  Cennamo, Bruno  Ando, Gianrico  Spagnuolo, Anuj K. Sharma, Roger  Narayan, Francesco  Arcadio, Maria  Pesavento, Carlos  Marques, and Letizia  De Maria, 31:40. Eng. Proc. Basel Switzerland: MDPI, 2023. <a href=\"https://doi.org/10.3390/ASEC2022-13811\">https://doi.org/10.3390/ASEC2022-13811</a>.","short":"B. Ekinci, A. Ehrmann, in: N. Cennamo, B. Ando, G. Spagnuolo, A.K. Sharma, R. Narayan, F. Arcadio, M. Pesavento, C. Marques, L. De Maria (Eds.), Proceedings of The 3rd International Electronic Conference on Applied Sciences, MDPI, Basel Switzerland, 2023, p. 40.","alphadin":"<span style=\"font-variant:small-caps;\">Ekinci, Burhan</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In: <span style=\"font-variant:small-caps;\"><span style=\"font-variant:small-caps;\">Cennamo, N.</span> ; <span style=\"font-variant:small-caps;\">Ando, B.</span> ; <span style=\"font-variant:small-caps;\">Spagnuolo, G.</span> ; <span style=\"font-variant:small-caps;\">Sharma, A. K.</span> ; <span style=\"font-variant:small-caps;\">Narayan, R.</span> ; <span style=\"font-variant:small-caps;\">Arcadio, F.</span> ; <span style=\"font-variant:small-caps;\">Pesavento, M.</span> ; <span style=\"font-variant:small-caps;\">Marques, C.</span> ; u. a.</span> (Hrsg.): <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, <i>Eng. Proc.</i>. Bd. 31. Basel Switzerland : MDPI, 2023, S. 40","apa":"Ekinci, B., &#38; Ehrmann, A. (2023). Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In N. Cennamo, B. Ando, G. Spagnuolo, A. K. Sharma, R. Narayan, F. Arcadio, … L. De Maria (Eds.), <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i> (Vol. 31, p. 40). Basel Switzerland: MDPI. <a href=\"https://doi.org/10.3390/ASEC2022-13811\">https://doi.org/10.3390/ASEC2022-13811</a>","bibtex":"@inproceedings{Ekinci_Ehrmann_2023, place={Basel Switzerland}, series={Eng. Proc.}, title={Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing}, volume={31}, DOI={<a href=\"https://doi.org/10.3390/ASEC2022-13811\">10.3390/ASEC2022-13811</a>}, number={1}, booktitle={Proceedings of The 3rd International Electronic Conference on Applied Sciences}, publisher={MDPI}, author={Ekinci, Burhan and Ehrmann, Andrea}, editor={Cennamo, Nunzio  and Ando, Bruno  and Spagnuolo, Gianrico  and Sharma, Anuj K. and Narayan, Roger  and Arcadio, Francesco  and Pesavento, Maria  and Marques, Carlos  and De Maria, Letizia Editors}, year={2023}, pages={40}, collection={Eng. Proc.} }","ieee":"B. Ekinci and A. Ehrmann, “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing,” in <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, Online, 2023, vol. 31, no. 1, p. 40."},"issue":"1","publication_status":"published","series_title":"Eng. Proc.","keyword":["3D printing","fused deposition modeling (FDM)","angular accuracy","dimensional accuracy"],"urn":"urn:nbn:de:hbz:bi10-23530","has_accepted_license":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"oa":"1"},{"citation":{"ama":"Ehrmann G, Blachowicz T, Ehrmann A. Magnetic 3D-Printed Composites—Production and Applications. <i>Polymers</i>. 2022;14(18). doi:<a href=\"https://doi.org/10.3390/polym14183895\">10.3390/polym14183895</a>","mla":"Ehrmann, Guido, et al. “Magnetic 3D-Printed Composites—Production and Applications.” <i>Polymers</i>, vol. 14, no. 18, 3895, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/polym14183895\">10.3390/polym14183895</a>.","short":"G. Ehrmann, T. Blachowicz, A. Ehrmann, Polymers 14 (2022).","chicago":"Ehrmann, Guido, Tomasz Blachowicz, and Andrea Ehrmann. “Magnetic 3D-Printed Composites—Production and Applications.” <i>Polymers</i> 14, no. 18 (2022). <a href=\"https://doi.org/10.3390/polym14183895\">https://doi.org/10.3390/polym14183895</a>.","bibtex":"@article{Ehrmann_Blachowicz_Ehrmann_2022, title={Magnetic 3D-Printed Composites—Production and Applications}, volume={14}, DOI={<a href=\"https://doi.org/10.3390/polym14183895\">10.3390/polym14183895</a>}, number={183895}, journal={Polymers}, publisher={MDPI AG}, author={Ehrmann, Guido and Blachowicz, Tomasz and Ehrmann, Andrea}, year={2022} }","apa":"Ehrmann, G., Blachowicz, T., &#38; Ehrmann, A. (2022). Magnetic 3D-Printed Composites—Production and Applications. <i>Polymers</i>, <i>14</i>(18). <a href=\"https://doi.org/10.3390/polym14183895\">https://doi.org/10.3390/polym14183895</a>","alphadin":"<span style=\"font-variant:small-caps;\">Ehrmann, Guido</span> ; <span style=\"font-variant:small-caps;\">Blachowicz, Tomasz</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Magnetic 3D-Printed Composites—Production and Applications. In: <i>Polymers</i> Bd. 14, MDPI AG (2022), Nr. 18","ieee":"G. Ehrmann, T. Blachowicz, and A. Ehrmann, “Magnetic 3D-Printed Composites—Production and Applications,” <i>Polymers</i>, vol. 14, no. 18, 2022."},"author":[{"last_name":"Ehrmann","full_name":"Ehrmann, Guido","first_name":"Guido"},{"first_name":"Tomasz","last_name":"Blachowicz","full_name":"Blachowicz, Tomasz"},{"full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann","id":"223776","first_name":"Andrea"}],"date_updated":"2026-03-17T15:28:31Z","publisher":"MDPI AG","language":[{"iso":"eng"}],"_id":"2278","article_type":"review","oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"has_accepted_license":"1","keyword":["fused deposition modeling (FDM)","magnetic hydrogel","photopolymerization","stereolithography (SLA)","hydrogel","shape memory polymer (SMP)","magneto-rheological behavior","electromagnetic shielding"],"urn":"urn:nbn:de:hbz:bi10-22783","publication_status":"published","issue":"18","status":"public","doi":"10.3390/polym14183895","intvolume":"        14","year":"2022","article_number":"3895","funded_apc":"1","quality_controlled":"1","volume":14,"date_created":"2022-12-23T14:49:36Z","title":"Magnetic 3D-Printed Composites—Production and Applications","file_date_updated":"2022-12-23T14:49:22Z","user_id":"216459","file":[{"date_updated":"2022-12-23T14:49:22Z","success":1,"date_created":"2022-12-23T14:49:22Z","creator":"aehrmann","file_name":"_2022_EhrmannG_Polymers14_3895.pdf","file_size":4801662,"content_type":"application/pdf","relation":"main_file","file_id":"2279","access_level":"open_access"}],"type":"journal_article","publication_identifier":{"eissn":["2073-4360"]},"publication":"Polymers"},{"date_updated":"2026-03-17T15:29:35Z","page":"25-35","doi":"10.3934/bioeng.2021004","intvolume":"         8","status":"public","author":[{"full_name":"Sölmann, Sven","last_name":"Sölmann","first_name":"Sven"},{"first_name":"Anke","full_name":"Rattenholl, Anke","last_name":"Rattenholl"},{"last_name":"Blattner","full_name":"Blattner, Hannah","first_name":"Hannah"},{"first_name":"Guido","last_name":"Ehrmann","full_name":"Ehrmann, Guido"},{"full_name":"Gudermann, Frank","last_name":"Gudermann","first_name":"Frank"},{"full_name":"Lütkemeyer, Dirk","last_name":"Lütkemeyer","first_name":"Dirk"},{"last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","first_name":"Andrea","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105572547","id":"223776"}],"citation":{"apa":"Sölmann, S., Rattenholl, A., Blattner, H., Ehrmann, G., Gudermann, F., Lütkemeyer, D., &#38; Ehrmann, A. (2021).  Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment. <i>AIMS Bioengineering</i>, <i>8</i>(1), 25–35. <a href=\"https://doi.org/10.3934/bioeng.2021004\">https://doi.org/10.3934/bioeng.2021004</a>","bibtex":"@article{Sölmann_Rattenholl_Blattner_Ehrmann_Gudermann_Lütkemeyer_Ehrmann_2021, title={ Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment}, volume={8}, DOI={<a href=\"https://doi.org/10.3934/bioeng.2021004\">10.3934/bioeng.2021004</a>}, number={1}, journal={AIMS Bioengineering}, author={Sölmann, Sven and Rattenholl, Anke and Blattner, Hannah and Ehrmann, Guido and Gudermann, Frank and Lütkemeyer, Dirk and Ehrmann, Andrea}, year={2021}, pages={25–35} }","alphadin":"<span style=\"font-variant:small-caps;\">Sölmann, Sven</span> ; <span style=\"font-variant:small-caps;\">Rattenholl, Anke</span> ; <span style=\"font-variant:small-caps;\">Blattner, Hannah</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Guido</span> ; <span style=\"font-variant:small-caps;\">Gudermann, Frank</span> ; <span style=\"font-variant:small-caps;\">Lütkemeyer, Dirk</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>:  Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment. In: <i>AIMS Bioengineering</i> Bd. 8 (2021), Nr. 1, S. 25–35","ieee":"S. Sölmann <i>et al.</i>, “ Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment,” <i>AIMS Bioengineering</i>, vol. 8, no. 1, pp. 25–35, 2021.","ama":"Sölmann S, Rattenholl A, Blattner H, et al.  Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment. <i>AIMS Bioengineering</i>. 2021;8(1):25-35. doi:<a href=\"https://doi.org/10.3934/bioeng.2021004\">10.3934/bioeng.2021004</a>","mla":"Sölmann, Sven, et al. “ Mammalian Cell Adhesion on Different 3D Printed Polymers with Varying Sterilization Methods and Acidic Treatment.” <i>AIMS Bioengineering</i>, vol. 8, no. 1, 2021, pp. 25–35, doi:<a href=\"https://doi.org/10.3934/bioeng.2021004\">10.3934/bioeng.2021004</a>.","short":"S. Sölmann, A. Rattenholl, H. Blattner, G. Ehrmann, F. Gudermann, D. Lütkemeyer, A. Ehrmann, AIMS Bioengineering 8 (2021) 25–35.","chicago":"Sölmann, Sven, Anke Rattenholl, Hannah Blattner, Guido Ehrmann, Frank Gudermann, Dirk Lütkemeyer, and Andrea Ehrmann. “ Mammalian Cell Adhesion on Different 3D Printed Polymers with Varying Sterilization Methods and Acidic Treatment.” <i>AIMS Bioengineering</i> 8, no. 1 (2021): 25–35. <a href=\"https://doi.org/10.3934/bioeng.2021004\">https://doi.org/10.3934/bioeng.2021004</a>."},"language":[{"iso":"eng"}],"_id":"694","year":"2021","volume":8,"date_created":"2021-01-03T18:14:05Z","title":" Mammalian cell adhesion on different 3D printed polymers with varying sterilization methods and acidic treatment","article_type":"original","file_date_updated":"2021-01-03T18:13:31Z","department":[{"_id":"103"}],"funded_apc":"1","quality_controlled":"1","keyword":["3D printing","FDM printing","sterilization","adherent cells","CHO cells"],"urn":"urn:nbn:de:hbz:bi10-6949","publication_status":"published","publication":"AIMS Bioengineering","issue":"1","main_file_link":[{"open_access":"1"}],"user_id":"220548","oa":"1","has_accepted_license":"1","file":[{"relation":"main_file","file_id":"695","access_level":"open_access","date_updated":"2021-01-03T18:13:31Z","success":1,"date_created":"2021-01-03T18:13:31Z","creator":"aehrmann","file_size":1154128,"file_name":"_2021_Sölmann_AIMSBioneng8_25-35.pdf","content_type":"application/pdf"}],"type":"journal_article"},{"date_created":"2022-01-01T14:20:08Z","article_type":"original","title":"Infill Designs for 3D-Printed Shape-Memory Objects","volume":9,"quality_controlled":"1","department":[{"_id":"103"}],"keyword":["poly(lactic acid) (PLA)","shape-memory polymer (SMP)","fused deposition modeling (FDM)","3D printing","infill pattern"],"issue":"2","publication_status":"published","publication":"Technologies","oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"type":"journal_article","publication_identifier":{"eissn":["2227-7080"]},"main_file_link":[{"url":"https://doi.org/10.3390/technologies9020029","open_access":"1"}],"user_id":"220548","doi":"10.3390/technologies9020029","intvolume":"         9","date_updated":"2026-03-17T15:28:23Z","publisher":"MDPI AG","citation":{"ama":"Koske D, Ehrmann A. Infill Designs for 3D-Printed Shape-Memory Objects. <i>Technologies</i>. 2021;9(2). doi:<a href=\"https://doi.org/10.3390/technologies9020029\">10.3390/technologies9020029</a>","mla":"Koske, Daniel, and Andrea Ehrmann. “Infill Designs for 3D-Printed Shape-Memory Objects.” <i>Technologies</i>, vol. 9, no. 2, 29, MDPI AG, 2021, doi:<a href=\"https://doi.org/10.3390/technologies9020029\">10.3390/technologies9020029</a>.","short":"D. Koske, A. Ehrmann, Technologies 9 (2021).","chicago":"Koske, Daniel, and Andrea Ehrmann. “Infill Designs for 3D-Printed Shape-Memory Objects.” <i>Technologies</i> 9, no. 2 (2021). <a href=\"https://doi.org/10.3390/technologies9020029\">https://doi.org/10.3390/technologies9020029</a>.","apa":"Koske, D., &#38; Ehrmann, A. (2021). Infill Designs for 3D-Printed Shape-Memory Objects. <i>Technologies</i>, <i>9</i>(2). <a href=\"https://doi.org/10.3390/technologies9020029\">https://doi.org/10.3390/technologies9020029</a>","bibtex":"@article{Koske_Ehrmann_2021, title={Infill Designs for 3D-Printed Shape-Memory Objects}, volume={9}, DOI={<a href=\"https://doi.org/10.3390/technologies9020029\">10.3390/technologies9020029</a>}, number={229}, journal={Technologies}, publisher={MDPI AG}, author={Koske, Daniel and Ehrmann, Andrea}, year={2021} }","alphadin":"<span style=\"font-variant:small-caps;\">Koske, Daniel</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Infill Designs for 3D-Printed Shape-Memory Objects. In: <i>Technologies</i> Bd. 9, MDPI AG (2021), Nr. 2","ieee":"D. Koske and A. Ehrmann, “Infill Designs for 3D-Printed Shape-Memory Objects,” <i>Technologies</i>, vol. 9, no. 2, 2021."},"author":[{"first_name":"Daniel","full_name":"Koske, Daniel","last_name":"Koske"},{"last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","first_name":"Andrea","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105571935"}],"status":"public","article_number":"29","_id":"1609","year":"2021","language":[{"iso":"eng"}]},{"user_id":"220548","main_file_link":[{"open_access":"1","url":"https://doi.org/10.3390/polym13081275"}],"type":"journal_article","publication_identifier":{"eissn":["2073-4360"]},"oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"publication_status":"published","issue":"8","publication":"Polymers","keyword":["polylactic acid (PLA)","fused deposition modeling (FDM)","three-point bending test","infill parameters","infill density","shape-memory properties"],"department":[{"_id":"103"}],"quality_controlled":"1","volume":13,"article_type":"original","title":"Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree","date_created":"2022-01-01T14:20:58Z","language":[{"iso":"eng"}],"year":"2021","_id":"1610","article_number":"1275","status":"public","author":[{"first_name":"Guido","last_name":"Ehrmann","full_name":"Ehrmann, Guido"},{"full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105571915","id":"223776","first_name":"Andrea"}],"citation":{"ieee":"G. Ehrmann and A. Ehrmann, “Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree,” <i>Polymers</i>, vol. 13, no. 8, 2021.","apa":"Ehrmann, G., &#38; Ehrmann, A. (2021). Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree. <i>Polymers</i>, <i>13</i>(8). <a href=\"https://doi.org/10.3390/polym13081275\">https://doi.org/10.3390/polym13081275</a>","bibtex":"@article{Ehrmann_Ehrmann_2021, title={Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree}, volume={13}, DOI={<a href=\"https://doi.org/10.3390/polym13081275\">10.3390/polym13081275</a>}, number={81275}, journal={Polymers}, publisher={MDPI AG}, author={Ehrmann, Guido and Ehrmann, Andrea}, year={2021} }","alphadin":"<span style=\"font-variant:small-caps;\">Ehrmann, Guido</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree. In: <i>Polymers</i> Bd. 13, MDPI AG (2021), Nr. 8","short":"G. Ehrmann, A. Ehrmann, Polymers 13 (2021).","chicago":"Ehrmann, Guido, and Andrea Ehrmann. “Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree.” <i>Polymers</i> 13, no. 8 (2021). <a href=\"https://doi.org/10.3390/polym13081275\">https://doi.org/10.3390/polym13081275</a>.","ama":"Ehrmann G, Ehrmann A. Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree. <i>Polymers</i>. 2021;13(8). doi:<a href=\"https://doi.org/10.3390/polym13081275\">10.3390/polym13081275</a>","mla":"Ehrmann, Guido, and Andrea Ehrmann. “Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree.” <i>Polymers</i>, vol. 13, no. 8, 1275, MDPI AG, 2021, doi:<a href=\"https://doi.org/10.3390/polym13081275\">10.3390/polym13081275</a>."},"publisher":"MDPI AG","date_updated":"2026-03-17T15:28:23Z","intvolume":"        13","doi":"10.3390/polym13081275"},{"year":"2021","_id":"1589","language":[{"iso":"eng"}],"article_number":"1225","citation":{"ieee":"D. Koske and A. Ehrmann, “Advanced Infill Designs for 3D Printed Shape-Memory Components,” <i>Micromachines</i>, vol. 12, no. 10, 2021.","alphadin":"<span style=\"font-variant:small-caps;\">Koske, Daniel</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Advanced Infill Designs for 3D Printed Shape-Memory Components. In: <i>Micromachines</i> Bd. 12, MDPI AG (2021), Nr. 10","bibtex":"@article{Koske_Ehrmann_2021, title={Advanced Infill Designs for 3D Printed Shape-Memory Components}, volume={12}, DOI={<a href=\"https://doi.org/10.3390/mi12101225\">10.3390/mi12101225</a>}, number={101225}, journal={Micromachines}, publisher={MDPI AG}, author={Koske, Daniel and Ehrmann, Andrea}, year={2021} }","apa":"Koske, D., &#38; Ehrmann, A. (2021). Advanced Infill Designs for 3D Printed Shape-Memory Components. <i>Micromachines</i>, <i>12</i>(10). <a href=\"https://doi.org/10.3390/mi12101225\">https://doi.org/10.3390/mi12101225</a>","short":"D. Koske, A. Ehrmann, Micromachines 12 (2021).","chicago":"Koske, Daniel, and Andrea Ehrmann. “Advanced Infill Designs for 3D Printed Shape-Memory Components.” <i>Micromachines</i> 12, no. 10 (2021). <a href=\"https://doi.org/10.3390/mi12101225\">https://doi.org/10.3390/mi12101225</a>.","mla":"Koske, Daniel, and Andrea Ehrmann. “Advanced Infill Designs for 3D Printed Shape-Memory Components.” <i>Micromachines</i>, vol. 12, no. 10, 1225, MDPI AG, 2021, doi:<a href=\"https://doi.org/10.3390/mi12101225\">10.3390/mi12101225</a>.","ama":"Koske D, Ehrmann A. Advanced Infill Designs for 3D Printed Shape-Memory Components. <i>Micromachines</i>. 2021;12(10). doi:<a href=\"https://doi.org/10.3390/mi12101225\">10.3390/mi12101225</a>"},"author":[{"first_name":"Daniel","full_name":"Koske, Daniel","last_name":"Koske"},{"first_name":"Andrea","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105572308","id":"223776","last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea"}],"status":"public","intvolume":"        12","doi":"10.3390/mi12101225","publisher":"MDPI AG","date_updated":"2026-03-17T15:28:22Z","type":"journal_article","publication_identifier":{"eissn":["2072-666X"]},"tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"oa":"1","user_id":"220548","main_file_link":[{"url":"https://doi.org/10.3390/mi12101225","open_access":"1"}],"publication":"Micromachines","publication_status":"published","issue":"10","keyword":["3D printing","poly(lactic acid) (PLA)","fused deposition modeling (FDM)","shape-memory polymer (SMP)","4D printing","infill patterns"],"quality_controlled":"1","department":[{"_id":"103"}],"title":"Advanced Infill Designs for 3D Printed Shape-Memory Components","article_type":"original","date_created":"2022-01-01T13:10:18Z","volume":12},{"oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"publication_identifier":{"eissn":["2227-7080"]},"type":"journal_article","main_file_link":[{"url":"https://doi.org/10.3390/technologies9040071","open_access":"1"}],"user_id":"220548","keyword":["polylactic acid (PLA)","shape-memory properties","fused deposition modeling (FDM)","three-point bending test","post-treatment","solvent","heat"],"issue":"4","publication_status":"published","publication":"Technologies","quality_controlled":"1","department":[{"_id":"103"}],"date_created":"2022-01-01T13:11:18Z","article_type":"original","title":"Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments","volume":9,"_id":"1590","year":"2021","language":[{"iso":"eng"}],"article_number":"71","citation":{"chicago":"Ehrmann, Guido, Bennet Brockhagen, and Andrea Ehrmann. “Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments.” <i>Technologies</i> 9, no. 4 (2021). <a href=\"https://doi.org/10.3390/technologies9040071\">https://doi.org/10.3390/technologies9040071</a>.","short":"G. Ehrmann, B. Brockhagen, A. Ehrmann, Technologies 9 (2021).","ama":"Ehrmann G, Brockhagen B, Ehrmann A. Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments. <i>Technologies</i>. 2021;9(4). doi:<a href=\"https://doi.org/10.3390/technologies9040071\">10.3390/technologies9040071</a>","mla":"Ehrmann, Guido, et al. “Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments.” <i>Technologies</i>, vol. 9, no. 4, 71, MDPI AG, 2021, doi:<a href=\"https://doi.org/10.3390/technologies9040071\">10.3390/technologies9040071</a>.","ieee":"G. Ehrmann, B. Brockhagen, and A. Ehrmann, “Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments,” <i>Technologies</i>, vol. 9, no. 4, 2021.","apa":"Ehrmann, G., Brockhagen, B., &#38; Ehrmann, A. (2021). Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments. <i>Technologies</i>, <i>9</i>(4). <a href=\"https://doi.org/10.3390/technologies9040071\">https://doi.org/10.3390/technologies9040071</a>","bibtex":"@article{Ehrmann_Brockhagen_Ehrmann_2021, title={Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments}, volume={9}, DOI={<a href=\"https://doi.org/10.3390/technologies9040071\">10.3390/technologies9040071</a>}, number={471}, journal={Technologies}, publisher={MDPI AG}, author={Ehrmann, Guido and Brockhagen, Bennet and Ehrmann, Andrea}, year={2021} }","alphadin":"<span style=\"font-variant:small-caps;\">Ehrmann, Guido</span> ; <span style=\"font-variant:small-caps;\">Brockhagen, Bennet</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments. In: <i>Technologies</i> Bd. 9, MDPI AG (2021), Nr. 4"},"author":[{"first_name":"Guido","full_name":"Ehrmann, Guido","last_name":"Ehrmann"},{"full_name":"Brockhagen, Bennet","last_name":"Brockhagen","first_name":"Bennet","id":"237316"},{"first_name":"Andrea","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105572294","id":"223776","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann"}],"status":"public","doi":"10.3390/technologies9040071","intvolume":"         9","date_updated":"2026-03-17T15:28:22Z","publisher":"MDPI AG"},{"year":"2019","article_number":"2034","status":"public","intvolume":"        11","doi":"10.3390/polym11122034","publication_identifier":{"issn":["2073-4360"]},"type":"journal_article","file":[{"relation":"main_file","file_id":"624","access_level":"open_access","date_updated":"2021-01-03T13:27:23Z","success":1,"date_created":"2021-01-03T13:27:23Z","creator":"aehrmann","file_size":4911061,"file_name":"_2019_Kozior_Polymers11_02034_corr.pdf","content_type":"application/pdf"}],"user_id":"220548","publication":"Polymers","quality_controlled":"1","department":[{"_id":"103"}],"funded_apc":"1","title":"Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites","file_date_updated":"2021-01-03T13:27:23Z","date_created":"2021-01-03T13:28:16Z","volume":11,"_id":"623","language":[{"iso":"eng"}],"author":[{"last_name":"Kozior","full_name":"Kozior, Tomasz","first_name":"Tomasz"},{"last_name":"Mamun","full_name":"Mamun, Al","first_name":"Al"},{"first_name":"Marah","last_name":"Trabelsi","full_name":"Trabelsi, Marah"},{"first_name":"Martin","full_name":"Wortmann, Martin","last_name":"Wortmann"},{"last_name":"Lilia","full_name":"Lilia, Sabantina","first_name":"Sabantina"},{"last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","first_name":"Andrea","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/168756138","id":"223776"}],"citation":{"mla":"Kozior, Tomasz, et al. “Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites.” <i>Polymers</i>, vol. 11, no. 12, 2034, MDPI, 2019, doi:<a href=\"https://doi.org/10.3390/polym11122034\">10.3390/polym11122034</a>.","ama":"Kozior T, Mamun A, Trabelsi M, Wortmann M, Lilia S, Ehrmann A. Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites. <i>Polymers</i>. 2019;11(12). doi:<a href=\"https://doi.org/10.3390/polym11122034\">10.3390/polym11122034</a>","chicago":"Kozior, Tomasz, Al Mamun, Marah Trabelsi, Martin Wortmann, Sabantina Lilia, and Andrea Ehrmann. “Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites.” <i>Polymers</i> 11, no. 12 (2019). <a href=\"https://doi.org/10.3390/polym11122034\">https://doi.org/10.3390/polym11122034</a>.","short":"T. Kozior, A. Mamun, M. Trabelsi, M. Wortmann, S. Lilia, A. Ehrmann, Polymers 11 (2019).","alphadin":"<span style=\"font-variant:small-caps;\">Kozior, Tomasz</span> ; <span style=\"font-variant:small-caps;\">Mamun, Al</span> ; <span style=\"font-variant:small-caps;\">Trabelsi, Marah</span> ; <span style=\"font-variant:small-caps;\">Wortmann, Martin</span> ; <span style=\"font-variant:small-caps;\">Lilia, Sabantina</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites. In: <i>Polymers</i> Bd. 11, MDPI (2019), Nr. 12","apa":"Kozior, T., Mamun, A., Trabelsi, M., Wortmann, M., Lilia, S., &#38; Ehrmann, A. (2019). Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites. <i>Polymers</i>, <i>11</i>(12). <a href=\"https://doi.org/10.3390/polym11122034\">https://doi.org/10.3390/polym11122034</a>","bibtex":"@article{Kozior_Mamun_Trabelsi_Wortmann_Lilia_Ehrmann_2019, title={Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites}, volume={11}, DOI={<a href=\"https://doi.org/10.3390/polym11122034\">10.3390/polym11122034</a>}, number={122034}, journal={Polymers}, publisher={MDPI}, author={Kozior, Tomasz and Mamun, Al and Trabelsi, Marah and Wortmann, Martin and Lilia, Sabantina and Ehrmann, Andrea}, year={2019} }","ieee":"T. Kozior, A. Mamun, M. Trabelsi, M. Wortmann, S. Lilia, and A. Ehrmann, “Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites,” <i>Polymers</i>, vol. 11, no. 12, 2019."},"publisher":"MDPI","date_updated":"2026-03-17T15:29:27Z","oa":"1","has_accepted_license":"1","issue":"12","publication_status":"published","urn":"urn:nbn:de:hbz:bi10-6237","keyword":["electrospinning","3D printing","FDM printing","nanofiber mat","adhesion","water filter"],"article_type":"original"},{"author":[{"first_name":"Tomasz","last_name":"Kozior","full_name":"Kozior, Tomasz"},{"full_name":"Trabelsi, Marah","last_name":"Trabelsi","first_name":"Marah"},{"full_name":"Mamun, Al","last_name":"Mamun","first_name":"Al"},{"full_name":"Sabantina, Lilia","last_name":"Sabantina","first_name":"Lilia"},{"last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","first_name":"Andrea","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/165781033"}],"citation":{"ieee":"T. Kozior, M. Trabelsi, A. Mamun, L. Sabantina, and A. Ehrmann, “ Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing ,” <i>Polymers</i>, vol. 11, no. 10, 2019.","alphadin":"<span style=\"font-variant:small-caps;\">Kozior, Tomasz</span> ; <span style=\"font-variant:small-caps;\">Trabelsi, Marah</span> ; <span style=\"font-variant:small-caps;\">Mamun, Al</span> ; <span style=\"font-variant:small-caps;\">Sabantina, Lilia</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>:  Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing . In: <i>Polymers</i> Bd. 11, MDPI (2019), Nr. 10","apa":"Kozior, T., Trabelsi, M., Mamun, A., Sabantina, L., &#38; Ehrmann, A. (2019).  Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing . <i>Polymers</i>, <i>11</i>(10). <a href=\"https://doi.org/10.3390/polym11101618\">https://doi.org/10.3390/polym11101618</a>","bibtex":"@article{Kozior_Trabelsi_Mamun_Sabantina_Ehrmann_2019, title={ Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing }, volume={11}, DOI={<a href=\"https://doi.org/10.3390/polym11101618\">10.3390/polym11101618</a>}, number={101618}, journal={Polymers}, publisher={MDPI}, author={Kozior, Tomasz and Trabelsi, Marah and Mamun, Al and Sabantina, Lilia and Ehrmann, Andrea}, year={2019} }","short":"T. Kozior, M. Trabelsi, A. Mamun, L. Sabantina, A. Ehrmann, Polymers 11 (2019).","chicago":"Kozior, Tomasz, Marah Trabelsi, Al Mamun, Lilia Sabantina, and Andrea Ehrmann. “ Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing .” <i>Polymers</i> 11, no. 10 (2019). <a href=\"https://doi.org/10.3390/polym11101618\">https://doi.org/10.3390/polym11101618</a>.","mla":"Kozior, Tomasz, et al. “ Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing .” <i>Polymers</i>, vol. 11, no. 10, 1618, MDPI, 2019, doi:<a href=\"https://doi.org/10.3390/polym11101618\">10.3390/polym11101618</a>.","ama":"Kozior T, Trabelsi M, Mamun A, Sabantina L, Ehrmann A.  Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing . <i>Polymers</i>. 2019;11(10). doi:<a href=\"https://doi.org/10.3390/polym11101618\">10.3390/polym11101618</a>"},"date_updated":"2026-03-17T15:29:24Z","publisher":"MDPI","language":[{"iso":"eng"}],"_id":"599","article_type":"original","oa":"1","has_accepted_license":"1","urn":"urn:nbn:de:hbz:bi10-5998","keyword":["nanofiber mat","electrospinning","water filter","3D printing","FDM printing","adhesion","stabilization","carbonization"],"publication_status":"published","issue":"10","status":"public","doi":"10.3390/polym11101618","intvolume":"        11","year":"2019","article_number":"1618","department":[{"_id":"103"}],"funded_apc":"1","quality_controlled":"1","volume":11,"date_created":"2019-10-06T09:19:53Z","title":" Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing ","file_date_updated":"2019-10-06T09:18:09Z","user_id":"220548","file":[{"access_level":"open_access","relation":"main_file","file_id":"600","content_type":"application/pdf","file_name":"_2019_Kozior_Polymers11_1618.pdf","file_size":1442387,"date_created":"2019-10-06T09:18:09Z","creator":"aehrmann","success":1,"date_updated":"2019-10-06T09:18:09Z"}],"type":"journal_article","publication_identifier":{"issn":["2073-4360"]},"publication":"Polymers"},{"article_number":"1199","_id":"1078","year":"2017","language":[{"iso":"eng"}],"doi":"10.3390/ma10101199","intvolume":"        10","date_updated":"2026-03-17T15:28:14Z","publisher":"MDPI AG","author":[{"first_name":"Susanna","last_name":"Fafenrot","full_name":"Fafenrot, Susanna"},{"first_name":"Nils","full_name":"Grimmelsmann, Nils","last_name":"Grimmelsmann"},{"first_name":"Martin","last_name":"Wortmann","full_name":"Wortmann, Martin"},{"first_name":"Andrea","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/94758844","id":"223776","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann"}],"citation":{"ieee":"S. Fafenrot, N. Grimmelsmann, M. Wortmann, and A. Ehrmann, “Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling,” <i>Materials</i>, vol. 10, no. 10, 2017.","apa":"Fafenrot, S., Grimmelsmann, N., Wortmann, M., &#38; Ehrmann, A. (2017). Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling. <i>Materials</i>, <i>10</i>(10). <a href=\"https://doi.org/10.3390/ma10101199\">https://doi.org/10.3390/ma10101199</a>","bibtex":"@article{Fafenrot_Grimmelsmann_Wortmann_Ehrmann_2017, title={Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling}, volume={10}, DOI={<a href=\"https://doi.org/10.3390/ma10101199\">10.3390/ma10101199</a>}, number={101199}, journal={Materials}, publisher={MDPI AG}, author={Fafenrot, Susanna and Grimmelsmann, Nils and Wortmann, Martin and Ehrmann, Andrea}, year={2017} }","alphadin":"<span style=\"font-variant:small-caps;\">Fafenrot, Susanna</span> ; <span style=\"font-variant:small-caps;\">Grimmelsmann, Nils</span> ; <span style=\"font-variant:small-caps;\">Wortmann, Martin</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling. In: <i>Materials</i> Bd. 10, MDPI AG (2017), Nr. 10","chicago":"Fafenrot, Susanna, Nils Grimmelsmann, Martin Wortmann, and Andrea Ehrmann. “Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling.” <i>Materials</i> 10, no. 10 (2017). <a href=\"https://doi.org/10.3390/ma10101199\">https://doi.org/10.3390/ma10101199</a>.","short":"S. Fafenrot, N. Grimmelsmann, M. Wortmann, A. Ehrmann, Materials 10 (2017).","ama":"Fafenrot S, Grimmelsmann N, Wortmann M, Ehrmann A. Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling. <i>Materials</i>. 2017;10(10). doi:<a href=\"https://doi.org/10.3390/ma10101199\">10.3390/ma10101199</a>","mla":"Fafenrot, Susanna, et al. “Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling.” <i>Materials</i>, vol. 10, no. 10, 1199, MDPI AG, 2017, doi:<a href=\"https://doi.org/10.3390/ma10101199\">10.3390/ma10101199</a>."},"status":"public","keyword":["3D printing","FDM technology","hybrid printing materials","metal filamen t","tensile strength","flexural modulus"],"issue":"10","publication":"Materials","publication_status":"published","oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"type":"journal_article","publication_identifier":{"eissn":["1996-1944"]},"main_file_link":[{"url":"https://doi.org/10.3390/ma10101199","open_access":"1"}],"alternative_id":["330"],"user_id":"33980","date_created":"2021-05-31T18:36:42Z","title":"Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling","volume":10}]