[{"citation":{"bibtex":"@article{Tuvshinbayar_Mpofu_Berger_Storck_Büsgen_Ehrmann_2024, title={Comparison of FDM and SLA printing on woven fabrics}, volume={5}, DOI={<a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">10.25367/cdatp.2024.5.p169-177</a>}, number={2}, journal={Communications in Development and Assembling of Textile Products}, publisher={Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden}, author={Tuvshinbayar, Khorolsuren and Mpofu, Nonsikelelo Sheron and Berger, Thomas and Storck, Jan Lukas and Büsgen, Alexander and Ehrmann, Andrea}, year={2024}, pages={169–177} }","apa":"Tuvshinbayar, K., Mpofu, N. S., Berger, T., Storck, J. L., Büsgen, A., &#38; Ehrmann, A. (2024). Comparison of FDM and SLA printing on woven fabrics. <i>Communications in Development and Assembling of Textile Products</i>, <i>5</i>(2), 169–177. <a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">https://doi.org/10.25367/cdatp.2024.5.p169-177</a>","alphadin":"<span style=\"font-variant:small-caps;\">Tuvshinbayar, Khorolsuren</span> ; <span style=\"font-variant:small-caps;\">Mpofu, Nonsikelelo Sheron</span> ; <span style=\"font-variant:small-caps;\">Berger, Thomas</span> ; <span style=\"font-variant:small-caps;\">Storck, Jan Lukas</span> ; <span style=\"font-variant:small-caps;\">Büsgen, Alexander</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Comparison of FDM and SLA printing on woven fabrics. In: <i>Communications in Development and Assembling of Textile Products</i> Bd. 5, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden (2024), Nr. 2, S. 169–177","ieee":"K. Tuvshinbayar, N. S. Mpofu, T. Berger, J. L. Storck, A. Büsgen, and A. Ehrmann, “Comparison of FDM and SLA printing on woven fabrics,” <i>Communications in Development and Assembling of Textile Products</i>, vol. 5, no. 2, pp. 169–177, 2024.","ama":"Tuvshinbayar K, Mpofu NS, Berger T, Storck JL, Büsgen A, Ehrmann A. Comparison of FDM and SLA printing on woven fabrics. <i>Communications in Development and Assembling of Textile Products</i>. 2024;5(2):169-177. doi:<a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">10.25367/cdatp.2024.5.p169-177</a>","mla":"Tuvshinbayar, Khorolsuren, et al. “Comparison of FDM and SLA Printing on Woven Fabrics.” <i>Communications in Development and Assembling of Textile Products</i>, vol. 5, no. 2, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden, 2024, pp. 169–77, doi:<a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">10.25367/cdatp.2024.5.p169-177</a>.","short":"K. Tuvshinbayar, N.S. Mpofu, T. Berger, J.L. Storck, A. Büsgen, A. Ehrmann, Communications in Development and Assembling of Textile Products 5 (2024) 169–177.","chicago":"Tuvshinbayar, Khorolsuren, Nonsikelelo Sheron Mpofu, Thomas Berger, Jan Lukas Storck, Alexander Büsgen, and Andrea Ehrmann. “Comparison of FDM and SLA Printing on Woven Fabrics.” <i>Communications in Development and Assembling of Textile Products</i> 5, no. 2 (2024): 169–77. <a href=\"https://doi.org/10.25367/cdatp.2024.5.p169-177\">https://doi.org/10.25367/cdatp.2024.5.p169-177</a>."},"author":[{"first_name":"Khorolsuren","id":"222971","last_name":"Tuvshinbayar","orcid":"0009-0001-7114-1842","full_name":"Tuvshinbayar, Khorolsuren"},{"first_name":"Nonsikelelo Sheron","last_name":"Mpofu","full_name":"Mpofu, Nonsikelelo Sheron"},{"last_name":"Berger","full_name":"Berger, Thomas","first_name":"Thomas"},{"first_name":"Jan Lukas","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0002-6841-8791/work/169303729","id":"221157","last_name":"Storck","orcid":"0000-0002-6841-8791","full_name":"Storck, Jan Lukas"},{"first_name":"Alexander","full_name":"Büsgen, Alexander","last_name":"Büsgen"},{"last_name":"Ehrmann","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/169303732","id":"223776","first_name":"Andrea"}],"status":"public","doi":"10.25367/cdatp.2024.5.p169-177","intvolume":"         5","date_updated":"2026-03-17T15:29:12Z","publisher":"Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden","page":"169-177","_id":"5037","year":"2024","language":[{"iso":"eng"}],"quality_controlled":"1","date_created":"2024-10-10T15:57:02Z","article_type":"original","file_date_updated":"2024-10-10T15:56:18Z","title":"Comparison of FDM and SLA printing on woven fabrics","volume":5,"tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"oa":"1","has_accepted_license":"1","type":"journal_article","publication_identifier":{"eissn":["2701-939X"]},"file":[{"file_size":1725005,"file_name":"_2024_Tuvshinbayar_CDATP5_169-177.pdf","content_type":"application/pdf","success":1,"date_updated":"2024-10-10T15:56:18Z","creator":"aehrmann","date_created":"2024-10-10T15:56:18Z","access_level":"open_access","relation":"main_file","file_id":"5038"}],"user_id":"220548","keyword":["3D printing","fused deposition modeling (FDM)","stereolithography (SLA)","adhesion","textile fabric","woven fabric"],"urn":"urn:nbn:de:hbz:bi10-50370","issue":"2","publication_status":"published","publication":"Communications in Development and Assembling of Textile Products"},{"volume":66,"date_created":"2023-11-25T11:07:18Z","title":"Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites","file_date_updated":"2023-11-25T11:06:49Z","article_type":"original","quality_controlled":"1","urn":"urn:nbn:de:hbz:bi10-37551","keyword":["3D printing","fused deposition modeling (FDM)","flexible polymer","stab-resistance","VPAM-KDIW"],"publication":"Tekstilec","publication_status":"published","main_file_link":[{"url":"https://journals.uni-lj.si/tekstilec/article/view/14630","open_access":"1"}],"user_id":"220548","tmp":{"short":"CC BY-SA (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-sa/4.0/legalcode","name":"Creative Commons Attribution-ShareAlike 4.0 International Public License (CC BY-SA 4.0)","image":"/images/cc_by_sa.png"},"oa":"1","has_accepted_license":"1","file":[{"creator":"aehrmann","date_created":"2023-11-25T11:06:49Z","date_updated":"2023-11-25T11:06:49Z","success":1,"content_type":"application/pdf","file_name":"_2023_Cakar_Tekstilec66_online-first.pdf","file_size":976095,"relation":"main_file","file_id":"3756","access_level":"open_access"}],"publication_identifier":{"eissn":["2350-3696"],"issn":["0351-3386"]},"type":"journal_article","date_updated":"2026-03-17T15:28:49Z","publisher":"University of Ljubljana","page":"211-217","doi":"10.14502/tekstilec.66.2023050","intvolume":"        66","status":"public","author":[{"first_name":"Siver","full_name":"Cakar, Siver","last_name":"Cakar"},{"orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann","first_name":"Andrea","id":"223776"}],"citation":{"ieee":"S. Cakar and A. Ehrmann, “Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites,” <i>Tekstilec</i>, vol. 66, pp. 211–217, 2023.","alphadin":"<span style=\"font-variant:small-caps;\">Cakar, Siver</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites. In: <i>Tekstilec</i> Bd. 66, University of Ljubljana (2023), S. 211–217","apa":"Cakar, S., &#38; Ehrmann, A. (2023). Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites. <i>Tekstilec</i>, <i>66</i>, 211–217. <a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">https://doi.org/10.14502/tekstilec.66.2023050</a>","bibtex":"@article{Cakar_Ehrmann_2023, title={Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites}, volume={66}, DOI={<a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">10.14502/tekstilec.66.2023050</a>}, journal={Tekstilec}, publisher={University of Ljubljana}, author={Cakar, Siver and Ehrmann, Andrea}, year={2023}, pages={211–217} }","chicago":"Cakar, Siver, and Andrea Ehrmann. “Adhesion and Stab-Resistant Properties of FDM-Printed Polymer/Textile Composites.” <i>Tekstilec</i> 66 (2023): 211–17. <a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">https://doi.org/10.14502/tekstilec.66.2023050</a>.","short":"S. Cakar, A. Ehrmann, Tekstilec 66 (2023) 211–217.","mla":"Cakar, Siver, and Andrea Ehrmann. “Adhesion and Stab-Resistant Properties of FDM-Printed Polymer/Textile Composites.” <i>Tekstilec</i>, vol. 66, University of Ljubljana, 2023, pp. 211–17, doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">10.14502/tekstilec.66.2023050</a>.","ama":"Cakar S, Ehrmann A. Adhesion and Stab-resistant Properties of FDM-printed Polymer/Textile Composites. <i>Tekstilec</i>. 2023;66:211-217. doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023050\">10.14502/tekstilec.66.2023050</a>"},"language":[{"iso":"eng"}],"_id":"3755","year":"2023"},{"quality_controlled":"1","date_created":"2023-05-12T12:28:41Z","file_date_updated":"2023-08-25T20:17:39Z","title":"Adhesion of new thermoplastic materials printed on textile fabrics","volume":66,"type":"journal_article","file":[{"file_id":"3483","relation":"main_file","access_level":"open_access","date_created":"2023-08-25T20:17:39Z","creator":"aehrmann","date_updated":"2023-08-25T20:17:39Z","success":1,"content_type":"application/pdf","file_name":"_2023_Göksal_Tekstilec66_57-63.pdf","file_size":989560}],"publication_identifier":{"issn":["0351-3386"],"eissn":["2350-3696"]},"user_id":"245590","publication":"Tekstilec","status":"public","doi":"10.14502/tekstilec.66.2023012","intvolume":"        66","page":"57-63","year":"2023","article_type":"original","tmp":{"short":"CC BY-SA (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-sa/4.0/legalcode","name":"Creative Commons Attribution-ShareAlike 4.0 International Public License (CC BY-SA 4.0)","image":"/images/cc_by_sa.png"},"oa":"1","has_accepted_license":"1","main_file_link":[{"open_access":"1","url":"https://doi.org/10.14502/tekstilec.66.2023012"}],"keyword":["3D printing","fused deposition modeling (FDM)","high-performance polymers","high-performance polyolefin","fiber-reinforced polymers"],"urn":"urn:nbn:de:hbz:bi10-29124","issue":"1","publication_status":"published","author":[{"first_name":"Göksal","full_name":"Erdem, Göksal","last_name":"Erdem"},{"id":"221330","first_name":"Timo","last_name":"Grothe","full_name":"Grothe, Timo","orcid":"0000-0002-9099-4277"},{"full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann","id":"223776","first_name":"Andrea"}],"citation":{"ieee":"G. Erdem, T. Grothe, and A. Ehrmann, “Adhesion of new thermoplastic materials printed on textile fabrics,” <i>Tekstilec</i>, vol. 66, no. 1, pp. 57–63, 2023.","alphadin":"<span style=\"font-variant:small-caps;\">Erdem, Göksal</span> ; <span style=\"font-variant:small-caps;\">Grothe, Timo</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Adhesion of new thermoplastic materials printed on textile fabrics. In: <i>Tekstilec</i> Bd. 66, University of Ljubljana (2023), Nr. 1, S. 57–63","apa":"Erdem, G., Grothe, T., &#38; Ehrmann, A. (2023). Adhesion of new thermoplastic materials printed on textile fabrics. <i>Tekstilec</i>, <i>66</i>(1), 57–63. <a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">https://doi.org/10.14502/tekstilec.66.2023012</a>","bibtex":"@article{Erdem_Grothe_Ehrmann_2023, title={Adhesion of new thermoplastic materials printed on textile fabrics}, volume={66}, DOI={<a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">10.14502/tekstilec.66.2023012</a>}, number={1}, journal={Tekstilec}, publisher={University of Ljubljana}, author={Erdem, Göksal and Grothe, Timo and Ehrmann, Andrea}, year={2023}, pages={57–63} }","short":"G. Erdem, T. Grothe, A. Ehrmann, Tekstilec 66 (2023) 57–63.","chicago":"Erdem, Göksal, Timo Grothe, and Andrea Ehrmann. “Adhesion of New Thermoplastic Materials Printed on Textile Fabrics.” <i>Tekstilec</i> 66, no. 1 (2023): 57–63. <a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">https://doi.org/10.14502/tekstilec.66.2023012</a>.","mla":"Erdem, Göksal, et al. “Adhesion of New Thermoplastic Materials Printed on Textile Fabrics.” <i>Tekstilec</i>, vol. 66, no. 1, University of Ljubljana, 2023, pp. 57–63, doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">10.14502/tekstilec.66.2023012</a>.","ama":"Erdem G, Grothe T, Ehrmann A. Adhesion of new thermoplastic materials printed on textile fabrics. <i>Tekstilec</i>. 2023;66(1):57-63. doi:<a href=\"https://doi.org/10.14502/tekstilec.66.2023012\">10.14502/tekstilec.66.2023012</a>"},"date_updated":"2026-03-17T15:28:38Z","publisher":"University of Ljubljana","_id":"2912","language":[{"iso":"eng"}]},{"doi":"10.25367/cdatp.2023.4.p88-94","intvolume":"         4","date_updated":"2026-03-17T15:28:37Z","publisher":"Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden","page":"88-94","author":[{"first_name":"Mahmut-Sami","last_name":"Özev","full_name":"Özev, Mahmut-Sami"},{"full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann","id":"223776","first_name":"Andrea"}],"citation":{"alphadin":"<span style=\"font-variant:small-caps;\">Özev, Mahmut-Sami</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Sandwiching textiles with FDM Printing. In: <i>Communications in Development and Assembling of Textile Products</i> Bd. 4, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden (2023), Nr. 1, S. 88–94","bibtex":"@article{Özev_Ehrmann_2023, title={Sandwiching textiles with FDM Printing}, volume={4}, DOI={<a href=\"https://doi.org/10.25367/cdatp.2023.4.p88-94\">10.25367/cdatp.2023.4.p88-94</a>}, number={1}, journal={Communications in Development and Assembling of Textile Products}, publisher={Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden}, author={Özev, Mahmut-Sami and Ehrmann, Andrea}, year={2023}, pages={88–94} }","apa":"Özev, M.-S., &#38; Ehrmann, A. (2023). Sandwiching textiles with FDM Printing. <i>Communications in Development and Assembling of Textile Products</i>, <i>4</i>(1), 88–94. <a href=\"https://doi.org/10.25367/cdatp.2023.4.p88-94\">https://doi.org/10.25367/cdatp.2023.4.p88-94</a>","ieee":"M.-S. Özev and A. Ehrmann, “Sandwiching textiles with FDM Printing,” <i>Communications in Development and Assembling of Textile Products</i>, vol. 4, no. 1, pp. 88–94, 2023.","mla":"Özev, Mahmut-Sami, and Andrea Ehrmann. “Sandwiching Textiles with FDM Printing.” <i>Communications in Development and Assembling of Textile Products</i>, vol. 4, no. 1, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden, 2023, pp. 88–94, doi:<a href=\"https://doi.org/10.25367/cdatp.2023.4.p88-94\">10.25367/cdatp.2023.4.p88-94</a>.","ama":"Özev M-S, Ehrmann A. Sandwiching textiles with FDM Printing. <i>Communications in Development and Assembling of Textile Products</i>. 2023;4(1):88-94. doi:<a href=\"https://doi.org/10.25367/cdatp.2023.4.p88-94\">10.25367/cdatp.2023.4.p88-94</a>","chicago":"Özev, Mahmut-Sami, and Andrea Ehrmann. “Sandwiching Textiles with FDM Printing.” <i>Communications in Development and Assembling of Textile Products</i> 4, no. 1 (2023): 88–94. <a href=\"https://doi.org/10.25367/cdatp.2023.4.p88-94\">https://doi.org/10.25367/cdatp.2023.4.p88-94</a>.","short":"M.-S. Özev, A. Ehrmann, Communications in Development and Assembling of Textile Products 4 (2023) 88–94."},"status":"public","_id":"2769","year":"2023","language":[{"iso":"eng"}],"date_created":"2023-04-18T08:50:29Z","article_type":"original","file_date_updated":"2023-04-18T08:50:03Z","title":"Sandwiching textiles with FDM Printing","volume":4,"quality_controlled":"1","urn":"urn:nbn:de:hbz:bi10-27697","keyword":["textile fabrics","fused deposition modeling (FDM)","composite","thermoplastic polyurethane (TPU)","cotton","aramid"],"issue":"1","publication_status":"published","publication":"Communications in Development and Assembling of Textile Products","tmp":{"name":"Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)","image":"/images/cc_by_nc_nd.png","short":"CC BY-NC-ND (4.0)","legal_code_url":"https://creativecommons.org/licenses/by-nc-nd/4.0/legalcode"},"has_accepted_license":"1","oa":"1","type":"journal_article","file":[{"file_id":"2770","relation":"main_file","access_level":"open_access","success":1,"date_updated":"2023-04-18T08:50:03Z","creator":"aehrmann","date_created":"2023-04-18T08:50:03Z","file_name":"_2023_Özev_CDATP4_88-94.pdf","file_size":641229,"content_type":"application/pdf"}],"publication_identifier":{"eissn":["2701-939X"]},"user_id":"245590"},{"year":"2023","article_number":"56","status":"public","doi":"10.3390/technologies11020056","intvolume":"        11","user_id":"245590","file":[{"content_type":"application/pdf","file_name":"_2023_Werner_Technologies11_56.pdf","file_size":6037611,"creator":"aehrmann","date_created":"2023-04-18T08:51:17Z","success":1,"date_updated":"2023-04-18T08:51:17Z","access_level":"open_access","relation":"main_file","file_id":"2772"}],"publication_identifier":{"eissn":["2227-7080"]},"type":"journal_article","publication":"Technologies","funded_apc":"1","quality_controlled":"1","volume":11,"date_created":"2023-04-18T08:51:56Z","file_date_updated":"2023-04-18T08:51:17Z","title":"Examination of Polymer Blends by AFM Phase Images","language":[{"iso":"eng"}],"_id":"2771","citation":{"apa":"Werner, E., Güth, U., Brockhagen, B., Döpke, C., &#38; Ehrmann, A. (2023). Examination of Polymer Blends by AFM Phase Images. <i>Technologies</i>, <i>11</i>(2). <a href=\"https://doi.org/10.3390/technologies11020056\">https://doi.org/10.3390/technologies11020056</a>","bibtex":"@article{Werner_Güth_Brockhagen_Döpke_Ehrmann_2023, title={Examination of Polymer Blends by AFM Phase Images}, volume={11}, DOI={<a href=\"https://doi.org/10.3390/technologies11020056\">10.3390/technologies11020056</a>}, number={256}, journal={Technologies}, publisher={MDPI AG}, author={Werner, Enrico and Güth, Uwe and Brockhagen, Bennet and Döpke, Christoph and Ehrmann, Andrea}, year={2023} }","alphadin":"<span style=\"font-variant:small-caps;\">Werner, Enrico</span> ; <span style=\"font-variant:small-caps;\">Güth, Uwe</span> ; <span style=\"font-variant:small-caps;\">Brockhagen, Bennet</span> ; <span style=\"font-variant:small-caps;\">Döpke, Christoph</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Examination of Polymer Blends by AFM Phase Images. In: <i>Technologies</i> Bd. 11, MDPI AG (2023), Nr. 2","ieee":"E. Werner, U. Güth, B. Brockhagen, C. Döpke, and A. Ehrmann, “Examination of Polymer Blends by AFM Phase Images,” <i>Technologies</i>, vol. 11, no. 2, 2023.","ama":"Werner E, Güth U, Brockhagen B, Döpke C, Ehrmann A. Examination of Polymer Blends by AFM Phase Images. <i>Technologies</i>. 2023;11(2). doi:<a href=\"https://doi.org/10.3390/technologies11020056\">10.3390/technologies11020056</a>","mla":"Werner, Enrico, et al. “Examination of Polymer Blends by AFM Phase Images.” <i>Technologies</i>, vol. 11, no. 2, 56, MDPI AG, 2023, doi:<a href=\"https://doi.org/10.3390/technologies11020056\">10.3390/technologies11020056</a>.","short":"E. Werner, U. Güth, B. Brockhagen, C. Döpke, A. Ehrmann, Technologies 11 (2023).","chicago":"Werner, Enrico, Uwe Güth, Bennet Brockhagen, Christoph Döpke, and Andrea Ehrmann. “Examination of Polymer Blends by AFM Phase Images.” <i>Technologies</i> 11, no. 2 (2023). <a href=\"https://doi.org/10.3390/technologies11020056\">https://doi.org/10.3390/technologies11020056</a>."},"author":[{"last_name":"Werner","full_name":"Werner, Enrico","first_name":"Enrico"},{"full_name":"Güth, Uwe","last_name":"Güth","first_name":"Uwe"},{"id":"237316","first_name":"Bennet","last_name":"Brockhagen","full_name":"Brockhagen, Bennet"},{"last_name":"Döpke","full_name":"Döpke, Christoph","first_name":"Christoph"},{"first_name":"Andrea","id":"223776","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann"}],"date_updated":"2026-03-17T15:28:37Z","publisher":"MDPI AG","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"has_accepted_license":"1","oa":"1","keyword":["atomic force microscopy (AFM)","acrylonitrile butadiene styrene (ABS)","poly(lactic acid) (PLA)","fused deposition modeling (FDM)","additive manufacturing","polymer blends"],"urn":"urn:nbn:de:hbz:bi10-27710","issue":"2","publication_status":"published","article_type":"original"},{"quality_controlled":"1","file_date_updated":"2023-02-07T07:32:05Z","title":"Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing","date_created":"2023-02-07T07:32:57Z","volume":31,"file":[{"file_id":"2354","relation":"main_file","access_level":"open_access","creator":"aehrmann","date_created":"2023-02-07T07:32:05Z","success":1,"date_updated":"2023-02-07T07:32:05Z","content_type":"application/pdf","file_size":3784450,"file_name":"_2023_Ekinci_EngProc31_40.pdf"}],"type":"conference","user_id":"220548","publication":"Proceedings of The 3rd International Electronic Conference on Applied Sciences","conference":{"name":"The 3rd International Electronic Conference on Applied Sciences","location":"Online","start_date":"2022-12-01","end_date":"2022-12-15"},"status":"public","intvolume":"        31","doi":"10.3390/ASEC2022-13811","page":"40","year":"2023","oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"has_accepted_license":"1","issue":"1","series_title":"Eng. Proc.","publication_status":"published","keyword":["3D printing","fused deposition modeling (FDM)","angular accuracy","dimensional accuracy"],"urn":"urn:nbn:de:hbz:bi10-23530","place":"Basel Switzerland","citation":{"short":"B. Ekinci, A. Ehrmann, in: N. Cennamo, B. Ando, G. Spagnuolo, A.K. Sharma, R. Narayan, F. Arcadio, M. Pesavento, C. Marques, L. De Maria (Eds.), Proceedings of The 3rd International Electronic Conference on Applied Sciences, MDPI, Basel Switzerland, 2023, p. 40.","chicago":"Ekinci, Burhan, and Andrea Ehrmann. “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing.” In <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, edited by Nunzio  Cennamo, Bruno  Ando, Gianrico  Spagnuolo, Anuj K. Sharma, Roger  Narayan, Francesco  Arcadio, Maria  Pesavento, Carlos  Marques, and Letizia  De Maria, 31:40. Eng. Proc. Basel Switzerland: MDPI, 2023. <a href=\"https://doi.org/10.3390/ASEC2022-13811\">https://doi.org/10.3390/ASEC2022-13811</a>.","mla":"Ekinci, Burhan, and Andrea Ehrmann. “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing.” <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, edited by Nunzio  Cennamo et al., vol. 31, no. 1, MDPI, 2023, p. 40, doi:<a href=\"https://doi.org/10.3390/ASEC2022-13811\">10.3390/ASEC2022-13811</a>.","ama":"Ekinci B, Ehrmann A. Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In: Cennamo N, Ando B, Spagnuolo G, et al., eds. <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>. Vol 31. Eng. Proc. Basel Switzerland: MDPI; 2023:40. doi:<a href=\"https://doi.org/10.3390/ASEC2022-13811\">10.3390/ASEC2022-13811</a>","ieee":"B. Ekinci and A. Ehrmann, “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing,” in <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, Online, 2023, vol. 31, no. 1, p. 40.","alphadin":"<span style=\"font-variant:small-caps;\">Ekinci, Burhan</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In: <span style=\"font-variant:small-caps;\"><span style=\"font-variant:small-caps;\">Cennamo, N.</span> ; <span style=\"font-variant:small-caps;\">Ando, B.</span> ; <span style=\"font-variant:small-caps;\">Spagnuolo, G.</span> ; <span style=\"font-variant:small-caps;\">Sharma, A. K.</span> ; <span style=\"font-variant:small-caps;\">Narayan, R.</span> ; <span style=\"font-variant:small-caps;\">Arcadio, F.</span> ; <span style=\"font-variant:small-caps;\">Pesavento, M.</span> ; <span style=\"font-variant:small-caps;\">Marques, C.</span> ; u. a.</span> (Hrsg.): <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i>, <i>Eng. Proc.</i>. Bd. 31. Basel Switzerland : MDPI, 2023, S. 40","bibtex":"@inproceedings{Ekinci_Ehrmann_2023, place={Basel Switzerland}, series={Eng. Proc.}, title={Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing}, volume={31}, DOI={<a href=\"https://doi.org/10.3390/ASEC2022-13811\">10.3390/ASEC2022-13811</a>}, number={1}, booktitle={Proceedings of The 3rd International Electronic Conference on Applied Sciences}, publisher={MDPI}, author={Ekinci, Burhan and Ehrmann, Andrea}, editor={Cennamo, Nunzio  and Ando, Bruno  and Spagnuolo, Gianrico  and Sharma, Anuj K. and Narayan, Roger  and Arcadio, Francesco  and Pesavento, Maria  and Marques, Carlos  and De Maria, Letizia Editors}, year={2023}, pages={40}, collection={Eng. Proc.} }","apa":"Ekinci, B., &#38; Ehrmann, A. (2023). Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In N. Cennamo, B. Ando, G. Spagnuolo, A. K. Sharma, R. Narayan, F. Arcadio, … L. De Maria (Eds.), <i>Proceedings of The 3rd International Electronic Conference on Applied Sciences</i> (Vol. 31, p. 40). Basel Switzerland: MDPI. <a href=\"https://doi.org/10.3390/ASEC2022-13811\">https://doi.org/10.3390/ASEC2022-13811</a>"},"author":[{"first_name":"Burhan","full_name":"Ekinci, Burhan","last_name":"Ekinci"},{"id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/181737433","first_name":"Andrea","full_name":"Ehrmann, Andrea","orcid":"0000-0003-0695-3905","last_name":"Ehrmann"}],"publisher":"MDPI","date_updated":"2026-03-17T15:28:32Z","editor":[{"first_name":"Nunzio ","last_name":"Cennamo","full_name":"Cennamo, Nunzio "},{"first_name":"Bruno ","last_name":"Ando","full_name":"Ando, Bruno "},{"first_name":"Gianrico ","full_name":"Spagnuolo, Gianrico ","last_name":"Spagnuolo"},{"last_name":"Sharma","full_name":"Sharma, Anuj K.","first_name":"Anuj K."},{"first_name":"Roger ","full_name":"Narayan, Roger ","last_name":"Narayan"},{"full_name":"Arcadio, Francesco ","last_name":"Arcadio","first_name":"Francesco "},{"first_name":"Maria ","last_name":"Pesavento","full_name":"Pesavento, Maria "},{"first_name":"Carlos ","last_name":"Marques","full_name":"Marques, Carlos "},{"last_name":"De Maria","full_name":"De Maria, Letizia ","first_name":"Letizia "}],"_id":"2353","language":[{"iso":"eng"}]},{"publication":"Polymers","publication_identifier":{"eissn":["2073-4360"]},"type":"journal_article","file":[{"date_updated":"2022-12-23T14:49:22Z","success":1,"date_created":"2022-12-23T14:49:22Z","creator":"aehrmann","file_size":4801662,"file_name":"_2022_EhrmannG_Polymers14_3895.pdf","content_type":"application/pdf","file_id":"2279","relation":"main_file","access_level":"open_access"}],"user_id":"216459","file_date_updated":"2022-12-23T14:49:22Z","title":"Magnetic 3D-Printed Composites—Production and Applications","date_created":"2022-12-23T14:49:36Z","volume":14,"quality_controlled":"1","funded_apc":"1","article_number":"3895","year":"2022","intvolume":"        14","doi":"10.3390/polym14183895","status":"public","publication_status":"published","issue":"18","keyword":["fused deposition modeling (FDM)","magnetic hydrogel","photopolymerization","stereolithography (SLA)","hydrogel","shape memory polymer (SMP)","magneto-rheological behavior","electromagnetic shielding"],"urn":"urn:nbn:de:hbz:bi10-22783","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"oa":"1","has_accepted_license":"1","article_type":"review","_id":"2278","language":[{"iso":"eng"}],"publisher":"MDPI AG","date_updated":"2026-03-17T15:28:31Z","author":[{"first_name":"Guido","last_name":"Ehrmann","full_name":"Ehrmann, Guido"},{"last_name":"Blachowicz","full_name":"Blachowicz, Tomasz","first_name":"Tomasz"},{"orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann","first_name":"Andrea","id":"223776"}],"citation":{"chicago":"Ehrmann, Guido, Tomasz Blachowicz, and Andrea Ehrmann. “Magnetic 3D-Printed Composites—Production and Applications.” <i>Polymers</i> 14, no. 18 (2022). <a href=\"https://doi.org/10.3390/polym14183895\">https://doi.org/10.3390/polym14183895</a>.","short":"G. Ehrmann, T. Blachowicz, A. Ehrmann, Polymers 14 (2022).","mla":"Ehrmann, Guido, et al. “Magnetic 3D-Printed Composites—Production and Applications.” <i>Polymers</i>, vol. 14, no. 18, 3895, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/polym14183895\">10.3390/polym14183895</a>.","ama":"Ehrmann G, Blachowicz T, Ehrmann A. Magnetic 3D-Printed Composites—Production and Applications. <i>Polymers</i>. 2022;14(18). doi:<a href=\"https://doi.org/10.3390/polym14183895\">10.3390/polym14183895</a>","ieee":"G. Ehrmann, T. Blachowicz, and A. Ehrmann, “Magnetic 3D-Printed Composites—Production and Applications,” <i>Polymers</i>, vol. 14, no. 18, 2022.","alphadin":"<span style=\"font-variant:small-caps;\">Ehrmann, Guido</span> ; <span style=\"font-variant:small-caps;\">Blachowicz, Tomasz</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Magnetic 3D-Printed Composites—Production and Applications. In: <i>Polymers</i> Bd. 14, MDPI AG (2022), Nr. 18","bibtex":"@article{Ehrmann_Blachowicz_Ehrmann_2022, title={Magnetic 3D-Printed Composites—Production and Applications}, volume={14}, DOI={<a href=\"https://doi.org/10.3390/polym14183895\">10.3390/polym14183895</a>}, number={183895}, journal={Polymers}, publisher={MDPI AG}, author={Ehrmann, Guido and Blachowicz, Tomasz and Ehrmann, Andrea}, year={2022} }","apa":"Ehrmann, G., Blachowicz, T., &#38; Ehrmann, A. (2022). Magnetic 3D-Printed Composites—Production and Applications. <i>Polymers</i>, <i>14</i>(18). <a href=\"https://doi.org/10.3390/polym14183895\">https://doi.org/10.3390/polym14183895</a>"}},{"article_number":"29","language":[{"iso":"eng"}],"year":"2021","_id":"1609","publisher":"MDPI AG","date_updated":"2026-03-17T15:28:23Z","intvolume":"         9","doi":"10.3390/technologies9020029","status":"public","author":[{"first_name":"Daniel","full_name":"Koske, Daniel","last_name":"Koske"},{"first_name":"Andrea","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105571935","last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea"}],"citation":{"ieee":"D. Koske and A. Ehrmann, “Infill Designs for 3D-Printed Shape-Memory Objects,” <i>Technologies</i>, vol. 9, no. 2, 2021.","alphadin":"<span style=\"font-variant:small-caps;\">Koske, Daniel</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Infill Designs for 3D-Printed Shape-Memory Objects. In: <i>Technologies</i> Bd. 9, MDPI AG (2021), Nr. 2","apa":"Koske, D., &#38; Ehrmann, A. (2021). Infill Designs for 3D-Printed Shape-Memory Objects. <i>Technologies</i>, <i>9</i>(2). <a href=\"https://doi.org/10.3390/technologies9020029\">https://doi.org/10.3390/technologies9020029</a>","bibtex":"@article{Koske_Ehrmann_2021, title={Infill Designs for 3D-Printed Shape-Memory Objects}, volume={9}, DOI={<a href=\"https://doi.org/10.3390/technologies9020029\">10.3390/technologies9020029</a>}, number={229}, journal={Technologies}, publisher={MDPI AG}, author={Koske, Daniel and Ehrmann, Andrea}, year={2021} }","chicago":"Koske, Daniel, and Andrea Ehrmann. “Infill Designs for 3D-Printed Shape-Memory Objects.” <i>Technologies</i> 9, no. 2 (2021). <a href=\"https://doi.org/10.3390/technologies9020029\">https://doi.org/10.3390/technologies9020029</a>.","short":"D. Koske, A. Ehrmann, Technologies 9 (2021).","mla":"Koske, Daniel, and Andrea Ehrmann. “Infill Designs for 3D-Printed Shape-Memory Objects.” <i>Technologies</i>, vol. 9, no. 2, 29, MDPI AG, 2021, doi:<a href=\"https://doi.org/10.3390/technologies9020029\">10.3390/technologies9020029</a>.","ama":"Koske D, Ehrmann A. Infill Designs for 3D-Printed Shape-Memory Objects. <i>Technologies</i>. 2021;9(2). doi:<a href=\"https://doi.org/10.3390/technologies9020029\">10.3390/technologies9020029</a>"},"publication":"Technologies","issue":"2","publication_status":"published","keyword":["poly(lactic acid) (PLA)","shape-memory polymer (SMP)","fused deposition modeling (FDM)","3D printing","infill pattern"],"user_id":"220548","main_file_link":[{"open_access":"1","url":"https://doi.org/10.3390/technologies9020029"}],"publication_identifier":{"eissn":["2227-7080"]},"type":"journal_article","oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"volume":9,"title":"Infill Designs for 3D-Printed Shape-Memory Objects","article_type":"original","date_created":"2022-01-01T14:20:08Z","department":[{"_id":"103"}],"quality_controlled":"1"},{"user_id":"220548","main_file_link":[{"open_access":"1","url":"https://doi.org/10.3390/polym13081275"}],"type":"journal_article","publication_identifier":{"eissn":["2073-4360"]},"oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"issue":"8","publication_status":"published","publication":"Polymers","keyword":["polylactic acid (PLA)","fused deposition modeling (FDM)","three-point bending test","infill parameters","infill density","shape-memory properties"],"department":[{"_id":"103"}],"quality_controlled":"1","volume":13,"title":"Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree","article_type":"original","date_created":"2022-01-01T14:20:58Z","language":[{"iso":"eng"}],"year":"2021","_id":"1610","article_number":"1275","status":"public","author":[{"last_name":"Ehrmann","full_name":"Ehrmann, Guido","first_name":"Guido"},{"last_name":"Ehrmann","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","first_name":"Andrea","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105571915","id":"223776"}],"citation":{"ieee":"G. Ehrmann and A. Ehrmann, “Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree,” <i>Polymers</i>, vol. 13, no. 8, 2021.","apa":"Ehrmann, G., &#38; Ehrmann, A. (2021). Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree. <i>Polymers</i>, <i>13</i>(8). <a href=\"https://doi.org/10.3390/polym13081275\">https://doi.org/10.3390/polym13081275</a>","bibtex":"@article{Ehrmann_Ehrmann_2021, title={Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree}, volume={13}, DOI={<a href=\"https://doi.org/10.3390/polym13081275\">10.3390/polym13081275</a>}, number={81275}, journal={Polymers}, publisher={MDPI AG}, author={Ehrmann, Guido and Ehrmann, Andrea}, year={2021} }","alphadin":"<span style=\"font-variant:small-caps;\">Ehrmann, Guido</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree. In: <i>Polymers</i> Bd. 13, MDPI AG (2021), Nr. 8","chicago":"Ehrmann, Guido, and Andrea Ehrmann. “Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree.” <i>Polymers</i> 13, no. 8 (2021). <a href=\"https://doi.org/10.3390/polym13081275\">https://doi.org/10.3390/polym13081275</a>.","short":"G. Ehrmann, A. Ehrmann, Polymers 13 (2021).","ama":"Ehrmann G, Ehrmann A. Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree. <i>Polymers</i>. 2021;13(8). doi:<a href=\"https://doi.org/10.3390/polym13081275\">10.3390/polym13081275</a>","mla":"Ehrmann, Guido, and Andrea Ehrmann. “Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree.” <i>Polymers</i>, vol. 13, no. 8, 1275, MDPI AG, 2021, doi:<a href=\"https://doi.org/10.3390/polym13081275\">10.3390/polym13081275</a>."},"publisher":"MDPI AG","date_updated":"2026-03-17T15:28:23Z","intvolume":"        13","doi":"10.3390/polym13081275"},{"publisher":"MDPI AG","date_updated":"2026-03-17T15:28:22Z","intvolume":"        12","doi":"10.3390/mi12101225","status":"public","author":[{"full_name":"Koske, Daniel","last_name":"Koske","first_name":"Daniel"},{"first_name":"Andrea","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105572308","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann"}],"citation":{"short":"D. Koske, A. Ehrmann, Micromachines 12 (2021).","chicago":"Koske, Daniel, and Andrea Ehrmann. “Advanced Infill Designs for 3D Printed Shape-Memory Components.” <i>Micromachines</i> 12, no. 10 (2021). <a href=\"https://doi.org/10.3390/mi12101225\">https://doi.org/10.3390/mi12101225</a>.","mla":"Koske, Daniel, and Andrea Ehrmann. “Advanced Infill Designs for 3D Printed Shape-Memory Components.” <i>Micromachines</i>, vol. 12, no. 10, 1225, MDPI AG, 2021, doi:<a href=\"https://doi.org/10.3390/mi12101225\">10.3390/mi12101225</a>.","ama":"Koske D, Ehrmann A. Advanced Infill Designs for 3D Printed Shape-Memory Components. <i>Micromachines</i>. 2021;12(10). doi:<a href=\"https://doi.org/10.3390/mi12101225\">10.3390/mi12101225</a>","ieee":"D. Koske and A. Ehrmann, “Advanced Infill Designs for 3D Printed Shape-Memory Components,” <i>Micromachines</i>, vol. 12, no. 10, 2021.","alphadin":"<span style=\"font-variant:small-caps;\">Koske, Daniel</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Advanced Infill Designs for 3D Printed Shape-Memory Components. In: <i>Micromachines</i> Bd. 12, MDPI AG (2021), Nr. 10","apa":"Koske, D., &#38; Ehrmann, A. (2021). Advanced Infill Designs for 3D Printed Shape-Memory Components. <i>Micromachines</i>, <i>12</i>(10). <a href=\"https://doi.org/10.3390/mi12101225\">https://doi.org/10.3390/mi12101225</a>","bibtex":"@article{Koske_Ehrmann_2021, title={Advanced Infill Designs for 3D Printed Shape-Memory Components}, volume={12}, DOI={<a href=\"https://doi.org/10.3390/mi12101225\">10.3390/mi12101225</a>}, number={101225}, journal={Micromachines}, publisher={MDPI AG}, author={Koske, Daniel and Ehrmann, Andrea}, year={2021} }"},"article_number":"1225","language":[{"iso":"eng"}],"year":"2021","_id":"1589","volume":12,"article_type":"original","title":"Advanced Infill Designs for 3D Printed Shape-Memory Components","date_created":"2022-01-01T13:10:18Z","department":[{"_id":"103"}],"quality_controlled":"1","publication":"Micromachines","publication_status":"published","issue":"10","keyword":["3D printing","poly(lactic acid) (PLA)","fused deposition modeling (FDM)","shape-memory polymer (SMP)","4D printing","infill patterns"],"user_id":"220548","main_file_link":[{"url":"https://doi.org/10.3390/mi12101225","open_access":"1"}],"type":"journal_article","publication_identifier":{"eissn":["2072-666X"]},"oa":"1","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"}},{"keyword":["polylactic acid (PLA)","shape-memory properties","fused deposition modeling (FDM)","three-point bending test","post-treatment","solvent","heat"],"issue":"4","publication_status":"published","publication":"Technologies","tmp":{"short":"CC BY (4.0)","legal_code_url":"https://creativecommons.org/licenses/by/4.0/legalcode","name":"Creative Commons Attribution 4.0 International Public License (CC-BY 4.0)","image":"/images/cc_by.png"},"oa":"1","type":"journal_article","publication_identifier":{"eissn":["2227-7080"]},"main_file_link":[{"url":"https://doi.org/10.3390/technologies9040071","open_access":"1"}],"user_id":"220548","date_created":"2022-01-01T13:11:18Z","title":"Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments","article_type":"original","volume":9,"quality_controlled":"1","department":[{"_id":"103"}],"article_number":"71","_id":"1590","year":"2021","language":[{"iso":"eng"}],"doi":"10.3390/technologies9040071","intvolume":"         9","date_updated":"2026-03-17T15:28:22Z","publisher":"MDPI AG","citation":{"ama":"Ehrmann G, Brockhagen B, Ehrmann A. Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments. <i>Technologies</i>. 2021;9(4). doi:<a href=\"https://doi.org/10.3390/technologies9040071\">10.3390/technologies9040071</a>","mla":"Ehrmann, Guido, et al. “Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments.” <i>Technologies</i>, vol. 9, no. 4, 71, MDPI AG, 2021, doi:<a href=\"https://doi.org/10.3390/technologies9040071\">10.3390/technologies9040071</a>.","short":"G. Ehrmann, B. Brockhagen, A. Ehrmann, Technologies 9 (2021).","chicago":"Ehrmann, Guido, Bennet Brockhagen, and Andrea Ehrmann. “Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments.” <i>Technologies</i> 9, no. 4 (2021). <a href=\"https://doi.org/10.3390/technologies9040071\">https://doi.org/10.3390/technologies9040071</a>.","bibtex":"@article{Ehrmann_Brockhagen_Ehrmann_2021, title={Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments}, volume={9}, DOI={<a href=\"https://doi.org/10.3390/technologies9040071\">10.3390/technologies9040071</a>}, number={471}, journal={Technologies}, publisher={MDPI AG}, author={Ehrmann, Guido and Brockhagen, Bennet and Ehrmann, Andrea}, year={2021} }","apa":"Ehrmann, G., Brockhagen, B., &#38; Ehrmann, A. (2021). Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments. <i>Technologies</i>, <i>9</i>(4). <a href=\"https://doi.org/10.3390/technologies9040071\">https://doi.org/10.3390/technologies9040071</a>","alphadin":"<span style=\"font-variant:small-caps;\">Ehrmann, Guido</span> ; <span style=\"font-variant:small-caps;\">Brockhagen, Bennet</span> ; <span style=\"font-variant:small-caps;\">Ehrmann, Andrea</span>: Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments. In: <i>Technologies</i> Bd. 9, MDPI AG (2021), Nr. 4","ieee":"G. Ehrmann, B. Brockhagen, and A. Ehrmann, “Shape-Memory Properties of 3D Printed Cubes from Diverse PLA Materials with Different Post-Treatments,” <i>Technologies</i>, vol. 9, no. 4, 2021."},"author":[{"full_name":"Ehrmann, Guido","last_name":"Ehrmann","first_name":"Guido"},{"full_name":"Brockhagen, Bennet","last_name":"Brockhagen","id":"237316","first_name":"Bennet"},{"first_name":"Andrea","id":"223776","orcid_put_code_url":"https://api.orcid.org/v2.0/0000-0003-0695-3905/work/105572294","orcid":"0000-0003-0695-3905","full_name":"Ehrmann, Andrea","last_name":"Ehrmann"}],"status":"public"}]