PUBLIKATIONSSERVER

Christoph Jaroschek

Fachbereich Ingenieurwissenschaften und Mathematik
https://orcid.org/0000-0002-3344-9619

23 Publikationen

Alle markieren

[23]
2025 | Konferenzbeitrag | FH-PUB-ID: 6123
@inproceedings{Brikmann_Jaroschek_2025, title={Optimum mold temperatures for sustainable injection molding}, author={Brikmann, J. and Jaroschek, Christoph}, year={2025} }
HSBI-PUB
 
[22]
2024 | Kurzbeitrag Konferenz | FH-PUB-ID: 6106
@inproceedings{Brikmann_Jaroschek_Moritzer_2024, title={S11-183 Simulative investigation of the influence of mold temperature on the filling  process and its effect on part quality during injection molding}, author={Brikmann, Johannes and Jaroschek, Christoph and Moritzer, Elmar }, year={2024} }
HSBI-PUB
 
[21]
2024 | Kurzbeitrag Konferenz | FH-PUB-ID: 6105
@inproceedings{Brikmann_Jaroschek_Moritzer_2024, title={Influence of mold temperature on the filling process, component quality and energy  efficiency in injection molding}, author={Brikmann, Johannes and Jaroschek, Christoph and Moritzer, Elmar }, year={2024} }
HSBI-PUB
 
[20]
2024 | Konferenzbeitrag | FH-PUB-ID: 6118
@inproceedings{Kartelmeyer_Welling_Jaroschek_2024, place={New York, USA}, title={ Cycle time optimization through external cooling of mold inserts during Rapid Tooling}, booktitle={Conference Proceedings SPE Antec}, publisher={Curran Associates, Inc.}, author={Kartelmeyer, S and Welling, F. and Jaroschek, Christoph}, editor={Society of Plastics EngineersEditor}, year={2024}, pages={259–263} }
HSBI-PUB
 
[19]
2024 | Konferenzbeitrag | FH-PUB-ID: 6117
@inproceedings{Kartelmeyer_Kringe_Jaroschek_2024, place={New York, USA}, title={Designing conformal cooling simply and economically}, booktitle={Conference Proceedings SPE Antec}, publisher={Curran Associates, Inc.}, author={Kartelmeyer, S. and Kringe, R. and Jaroschek, Christoph}, editor={Society of Plastics EngineersEditor}, year={2024}, pages={833–837} }
HSBI-PUB
 
[18]
2024 | Konferenzbeitrag | FH-PUB-ID: 6116
@inproceedings{Kraemer_Kartelmeyer_Jaroschek_2024, place={New York, USA}, title={Injection Molds with near-contour Heat Pipe from the 3D Printer – a new temperature control concept}, booktitle={Conference Proceedings SPE Antec}, publisher={Curran Associates, Inc.}, author={Kraemer, D. and Kartelmeyer, S. and Jaroschek, Christoph}, editor={Society of Plastics EngineersEditor}, year={2024}, pages={597–601} }
HSBI-PUB
 
[17]
2024 | Artikel | FH-PUB-ID: 6119
@article{Kartelmeyer_Kraemer_Jaroschek_2024, title={Durch Verdampfung Werkzeuge gleichmäßig und konturnah kühlen}, journal={Stahlformenbauer}, publisher={Fachverlag Möller}, author={Kartelmeyer, S. and Kraemer, D. and Jaroschek, Christoph}, year={2024} }
HSBI-PUB
 
[16]
2024 | Artikel | FH-PUB-ID: 6109
@article{Kartelmeyer_Kramer_Jaroschek_2024, title={Was ein neuer Konstruktionsansatz in der Werkzeugtemperierung ermöglicht Kernkühlung mit strukturintegrierter Heatpipe}, journal={Plastverarbeiter}, author={Kartelmeyer, S. and Kramer, D. and Jaroschek, Christoph}, year={2024} }
HSBI-PUB
 
[15]
2024 | Artikel | FH-PUB-ID: 6107
@article{Kartelmeyer_Kraemer_Jaroschek_2024, title={Lang und schmal kühlen durch Verdampfung}, journal={Plastverarbeiter }, author={Kartelmeyer, S. and Kraemer, D. and Jaroschek, Christoph}, year={2024} }
HSBI-PUB
 
[14]
2023 | Konferenzbeitrag | FH-PUB-ID: 6120
@inproceedings{Brikmann_Jaroschek_2023, title={PRESSURE DEPENDENCE OF POLYMER AGING IN THERMOPLASTIC PROCESSING}, author={Brikmann, Johannes and Jaroschek, Christoph}, year={2023} }
HSBI-PUB
 
[13]
2023 | Artikel | FH-PUB-ID: 6114
@article{Kartelmeyer_Kringe_Jaroschek_2023, title={Konturnahe Kühlung einfach und günstig konstruieren}, journal={Conference Proceedings Technomer}, author={Kartelmeyer, S. and Kringe, R. and Jaroschek, Christoph}, year={2023} }
HSBI-PUB
 
[12]
2023 | Konferenzbeitrag | FH-PUB-ID: 6115
@inproceedings{Kartelmeyer_Welling_Jaroschek_2023, title={Neuartiger Konstruktionsansatz für das Rapid Tooling}, author={Kartelmeyer, S. and Welling, F. and Jaroschek, Christoph}, year={2023} }
HSBI-PUB
 
[11]
2023 | Artikel | FH-PUB-ID: 6113
@article{Kraemer_Kartelmeyer_Moritzer_Jaroschek_2023, title={Hot-Spot Kühlung mit strukturintegrierten Heatpipe-Kernen}, journal={Conference Proceedings Technomer}, author={Kraemer, D. and Kartelmeyer, S. and Moritzer, E. and Jaroschek, Christoph}, year={2023} }
HSBI-PUB
 
[10]
2023 | Artikel | FH-PUB-ID: 6111
@article{Kartelmeyer_Kraemer_Moritzer_Jaroschek_2023, title={Goodbye Hot Spots – With No Extra Energy Expenditure}, number={7}, journal={ Plastic Insights}, publisher={Hanser}, author={Kartelmeyer, S. and Kraemer, D. and Moritzer, E. and Jaroschek, Christoph}, year={2023} }
HSBI-PUB
 
[9]
2023 | Artikel | FH-PUB-ID: 6110
@article{Kartelmeyer_Kringe_Moritzer_Jaroschek_2023, title={ Konturnah kühlen für wenig Geld}, number={8}, journal={Kunststoffe}, publisher={Carl Hanser Verlag, München}, author={Kartelmeyer, S. and Kringe, R. and Moritzer, E. and Jaroschek, Christoph}, year={2023}, pages={56–59} }
HSBI-PUB
 
[8]
2023 | Artikel | FH-PUB-ID: 6108
@article{Kartelmeyer_Kraemer_Moritzer_Jaroschek_2023, title={Hotspot ade – ohne Extra-Energieaufwand}, number={5}, journal={Kunststoffe}, author={Kartelmeyer, S. and Kraemer, D. and Moritzer, E. and Jaroschek, Christoph}, year={2023}, pages={64–67} }
HSBI-PUB
 
[7]
2022 | Fachbuch | FH-PUB-ID: 2719
@book{Jaroschek_2022, place={München}, title={Design of Injection Molded Plastic Parts}, DOI={10.3139/9781569908945}, publisher={Carl Hanser Verlag GmbH & Co. KG}, author={Jaroschek, Christoph}, year={2022} }
HSBI-PUB | DOI
 
[6]
2021 | Diskussionspapier | FH-PUB-ID: 2222 | OA
@book{Nauerth_Horstmann_Jaroschek_Naumann_Raschper_von der Heyden_Wickenkamp_Falkenstern_Tulka-Vollrath_Stampa_et al._2021, place={Bielefeld}, series={Berichte aus Forschung und Lehre }, title={Abschlussbericht des Forschungsschwerpunktes InGeTec – Individualisierung in Gesundheit und Technik }, volume={51}, publisher={Fachhochschule Bielefeld}, author={Nauerth, Annette and Horstmann, Magnus and Jaroschek, Christoph and Naumann, Rolf and Raschper, Patrizia and von der Heyden, Renate and Wickenkamp, Inge and Falkenstern, Christian and Tulka-Vollrath, Sabrina and Stampa, Susanne and et al.}, year={2021}, collection={Berichte aus Forschung und Lehre } }
HSBI-PUB | Download (ext.)
 
[5]
2020 | Kurzbeitrag Konferenz | FH-PUB-ID: 4666
@inproceedings{Hüttemann_Lührmann_Kartelmeyer_Fromme_Moritzer_Jaroschek_2020, title={Simulative Development of a Convectively Cooled Heat Sink for a Heat Pipe Mould-Element}, booktitle={COMSOL Conference 2020 User Presentations}, author={Hüttemann, Vincent and Lührmann, Matthias and Kartelmeyer, Stephan and Fromme, Lars and Moritzer, Elmar and Jaroschek, Christoph}, year={2020} }
HSBI-PUB | Dateien verfügbar
 
[4]
2019 | Fachbuch | FH-PUB-ID: 2725
@book{Jaroschek_2019, place={München}, edition={4}, title={Spritzgießen für Praktiker}, DOI={10.3139/9783446458673.fm}, publisher={Carl Hanser Verlag GmbH & Co. KG}, author={Jaroschek, Christoph}, year={2019} }
HSBI-PUB | DOI
 
[3]
2018 | Konferenzbeitrag | FH-PUB-ID: 4669
@inproceedings{Kartelmeyer_Fromme_Hüttemann_Moritzer_Jaroschek_2018, title={Thermal Simulation of a Heat Pipe Tempered Injection Mould Tool}, booktitle={COMSOL Conference 2018 User Presentations}, author={Kartelmeyer, Stephan and Fromme, Lars and Hüttemann, Vincent and Moritzer, Elmar and Jaroschek, Christoph}, year={2018} }
HSBI-PUB | Dateien verfügbar
 
[2]
2018 | Fachbuch | FH-PUB-ID: 2721
@book{Jaroschek_2018, place={München}, title={Spritzgussteile konstruieren}, DOI={10.3139/9783446456327}, publisher={Carl Hanser Verlag GmbH & Co. KG}, author={Jaroschek, Christoph}, year={2018} }
HSBI-PUB | DOI
 
[1]
2015 | Fachbuch | FH-PUB-ID: 2722
@book{Weißbach_Dahms_Jaroschek_2015, place={Wiesbaden}, title={Werkstoffkunde. Strukturen, Eigenschaften, Prüfung}, DOI={10.1007/978-3-658-03919-6}, publisher={Springer Fachmedien Wiesbaden}, author={Weißbach, Wolfgang and Dahms, Michael and Jaroschek, Christoph}, year={2015} }
HSBI-PUB | DOI
 
Markierte Publikation(en)

Suche

Publikationen filtern

Darstellung / Sortierung

Zitationsstil: BibTEX

Export / Einbettung

23 Publikationen

Alle markieren

[23]
2025 | Konferenzbeitrag | FH-PUB-ID: 6123
@inproceedings{Brikmann_Jaroschek_2025, title={Optimum mold temperatures for sustainable injection molding}, author={Brikmann, J. and Jaroschek, Christoph}, year={2025} }
HSBI-PUB
 
[22]
2024 | Kurzbeitrag Konferenz | FH-PUB-ID: 6106
@inproceedings{Brikmann_Jaroschek_Moritzer_2024, title={S11-183 Simulative investigation of the influence of mold temperature on the filling  process and its effect on part quality during injection molding}, author={Brikmann, Johannes and Jaroschek, Christoph and Moritzer, Elmar }, year={2024} }
HSBI-PUB
 
[21]
2024 | Kurzbeitrag Konferenz | FH-PUB-ID: 6105
@inproceedings{Brikmann_Jaroschek_Moritzer_2024, title={Influence of mold temperature on the filling process, component quality and energy  efficiency in injection molding}, author={Brikmann, Johannes and Jaroschek, Christoph and Moritzer, Elmar }, year={2024} }
HSBI-PUB
 
[20]
2024 | Konferenzbeitrag | FH-PUB-ID: 6118
@inproceedings{Kartelmeyer_Welling_Jaroschek_2024, place={New York, USA}, title={ Cycle time optimization through external cooling of mold inserts during Rapid Tooling}, booktitle={Conference Proceedings SPE Antec}, publisher={Curran Associates, Inc.}, author={Kartelmeyer, S and Welling, F. and Jaroschek, Christoph}, editor={Society of Plastics EngineersEditor}, year={2024}, pages={259–263} }
HSBI-PUB
 
[19]
2024 | Konferenzbeitrag | FH-PUB-ID: 6117
@inproceedings{Kartelmeyer_Kringe_Jaroschek_2024, place={New York, USA}, title={Designing conformal cooling simply and economically}, booktitle={Conference Proceedings SPE Antec}, publisher={Curran Associates, Inc.}, author={Kartelmeyer, S. and Kringe, R. and Jaroschek, Christoph}, editor={Society of Plastics EngineersEditor}, year={2024}, pages={833–837} }
HSBI-PUB
 
[18]
2024 | Konferenzbeitrag | FH-PUB-ID: 6116
@inproceedings{Kraemer_Kartelmeyer_Jaroschek_2024, place={New York, USA}, title={Injection Molds with near-contour Heat Pipe from the 3D Printer – a new temperature control concept}, booktitle={Conference Proceedings SPE Antec}, publisher={Curran Associates, Inc.}, author={Kraemer, D. and Kartelmeyer, S. and Jaroschek, Christoph}, editor={Society of Plastics EngineersEditor}, year={2024}, pages={597–601} }
HSBI-PUB
 
[17]
2024 | Artikel | FH-PUB-ID: 6119
@article{Kartelmeyer_Kraemer_Jaroschek_2024, title={Durch Verdampfung Werkzeuge gleichmäßig und konturnah kühlen}, journal={Stahlformenbauer}, publisher={Fachverlag Möller}, author={Kartelmeyer, S. and Kraemer, D. and Jaroschek, Christoph}, year={2024} }
HSBI-PUB
 
[16]
2024 | Artikel | FH-PUB-ID: 6109
@article{Kartelmeyer_Kramer_Jaroschek_2024, title={Was ein neuer Konstruktionsansatz in der Werkzeugtemperierung ermöglicht Kernkühlung mit strukturintegrierter Heatpipe}, journal={Plastverarbeiter}, author={Kartelmeyer, S. and Kramer, D. and Jaroschek, Christoph}, year={2024} }
HSBI-PUB
 
[15]
2024 | Artikel | FH-PUB-ID: 6107
@article{Kartelmeyer_Kraemer_Jaroschek_2024, title={Lang und schmal kühlen durch Verdampfung}, journal={Plastverarbeiter }, author={Kartelmeyer, S. and Kraemer, D. and Jaroschek, Christoph}, year={2024} }
HSBI-PUB
 
[14]
2023 | Konferenzbeitrag | FH-PUB-ID: 6120
@inproceedings{Brikmann_Jaroschek_2023, title={PRESSURE DEPENDENCE OF POLYMER AGING IN THERMOPLASTIC PROCESSING}, author={Brikmann, Johannes and Jaroschek, Christoph}, year={2023} }
HSBI-PUB
 
[13]
2023 | Artikel | FH-PUB-ID: 6114
@article{Kartelmeyer_Kringe_Jaroschek_2023, title={Konturnahe Kühlung einfach und günstig konstruieren}, journal={Conference Proceedings Technomer}, author={Kartelmeyer, S. and Kringe, R. and Jaroschek, Christoph}, year={2023} }
HSBI-PUB
 
[12]
2023 | Konferenzbeitrag | FH-PUB-ID: 6115
@inproceedings{Kartelmeyer_Welling_Jaroschek_2023, title={Neuartiger Konstruktionsansatz für das Rapid Tooling}, author={Kartelmeyer, S. and Welling, F. and Jaroschek, Christoph}, year={2023} }
HSBI-PUB
 
[11]
2023 | Artikel | FH-PUB-ID: 6113
@article{Kraemer_Kartelmeyer_Moritzer_Jaroschek_2023, title={Hot-Spot Kühlung mit strukturintegrierten Heatpipe-Kernen}, journal={Conference Proceedings Technomer}, author={Kraemer, D. and Kartelmeyer, S. and Moritzer, E. and Jaroschek, Christoph}, year={2023} }
HSBI-PUB
 
[10]
2023 | Artikel | FH-PUB-ID: 6111
@article{Kartelmeyer_Kraemer_Moritzer_Jaroschek_2023, title={Goodbye Hot Spots – With No Extra Energy Expenditure}, number={7}, journal={ Plastic Insights}, publisher={Hanser}, author={Kartelmeyer, S. and Kraemer, D. and Moritzer, E. and Jaroschek, Christoph}, year={2023} }
HSBI-PUB
 
[9]
2023 | Artikel | FH-PUB-ID: 6110
@article{Kartelmeyer_Kringe_Moritzer_Jaroschek_2023, title={ Konturnah kühlen für wenig Geld}, number={8}, journal={Kunststoffe}, publisher={Carl Hanser Verlag, München}, author={Kartelmeyer, S. and Kringe, R. and Moritzer, E. and Jaroschek, Christoph}, year={2023}, pages={56–59} }
HSBI-PUB
 
[8]
2023 | Artikel | FH-PUB-ID: 6108
@article{Kartelmeyer_Kraemer_Moritzer_Jaroschek_2023, title={Hotspot ade – ohne Extra-Energieaufwand}, number={5}, journal={Kunststoffe}, author={Kartelmeyer, S. and Kraemer, D. and Moritzer, E. and Jaroschek, Christoph}, year={2023}, pages={64–67} }
HSBI-PUB
 
[7]
2022 | Fachbuch | FH-PUB-ID: 2719
@book{Jaroschek_2022, place={München}, title={Design of Injection Molded Plastic Parts}, DOI={10.3139/9781569908945}, publisher={Carl Hanser Verlag GmbH & Co. KG}, author={Jaroschek, Christoph}, year={2022} }
HSBI-PUB | DOI
 
[6]
2021 | Diskussionspapier | FH-PUB-ID: 2222 | OA
@book{Nauerth_Horstmann_Jaroschek_Naumann_Raschper_von der Heyden_Wickenkamp_Falkenstern_Tulka-Vollrath_Stampa_et al._2021, place={Bielefeld}, series={Berichte aus Forschung und Lehre }, title={Abschlussbericht des Forschungsschwerpunktes InGeTec – Individualisierung in Gesundheit und Technik }, volume={51}, publisher={Fachhochschule Bielefeld}, author={Nauerth, Annette and Horstmann, Magnus and Jaroschek, Christoph and Naumann, Rolf and Raschper, Patrizia and von der Heyden, Renate and Wickenkamp, Inge and Falkenstern, Christian and Tulka-Vollrath, Sabrina and Stampa, Susanne and et al.}, year={2021}, collection={Berichte aus Forschung und Lehre } }
HSBI-PUB | Download (ext.)
 
[5]
2020 | Kurzbeitrag Konferenz | FH-PUB-ID: 4666
@inproceedings{Hüttemann_Lührmann_Kartelmeyer_Fromme_Moritzer_Jaroschek_2020, title={Simulative Development of a Convectively Cooled Heat Sink for a Heat Pipe Mould-Element}, booktitle={COMSOL Conference 2020 User Presentations}, author={Hüttemann, Vincent and Lührmann, Matthias and Kartelmeyer, Stephan and Fromme, Lars and Moritzer, Elmar and Jaroschek, Christoph}, year={2020} }
HSBI-PUB | Dateien verfügbar
 
[4]
2019 | Fachbuch | FH-PUB-ID: 2725
@book{Jaroschek_2019, place={München}, edition={4}, title={Spritzgießen für Praktiker}, DOI={10.3139/9783446458673.fm}, publisher={Carl Hanser Verlag GmbH & Co. KG}, author={Jaroschek, Christoph}, year={2019} }
HSBI-PUB | DOI
 
[3]
2018 | Konferenzbeitrag | FH-PUB-ID: 4669
@inproceedings{Kartelmeyer_Fromme_Hüttemann_Moritzer_Jaroschek_2018, title={Thermal Simulation of a Heat Pipe Tempered Injection Mould Tool}, booktitle={COMSOL Conference 2018 User Presentations}, author={Kartelmeyer, Stephan and Fromme, Lars and Hüttemann, Vincent and Moritzer, Elmar and Jaroschek, Christoph}, year={2018} }
HSBI-PUB | Dateien verfügbar
 
[2]
2018 | Fachbuch | FH-PUB-ID: 2721
@book{Jaroschek_2018, place={München}, title={Spritzgussteile konstruieren}, DOI={10.3139/9783446456327}, publisher={Carl Hanser Verlag GmbH & Co. KG}, author={Jaroschek, Christoph}, year={2018} }
HSBI-PUB | DOI
 
[1]
2015 | Fachbuch | FH-PUB-ID: 2722
@book{Weißbach_Dahms_Jaroschek_2015, place={Wiesbaden}, title={Werkstoffkunde. Strukturen, Eigenschaften, Prüfung}, DOI={10.1007/978-3-658-03919-6}, publisher={Springer Fachmedien Wiesbaden}, author={Weißbach, Wolfgang and Dahms, Michael and Jaroschek, Christoph}, year={2015} }
HSBI-PUB | DOI
 
Markierte Publikation(en)

Suche

Publikationen filtern

Darstellung / Sortierung

Zitationsstil: BibTEX

Export / Einbettung