Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing
B. Ekinci, A. Ehrmann, in: N. Cennamo, B. Ando, G. Spagnuolo, A.K. Sharma, R. Narayan, F. Arcadio, M. Pesavento, C. Marques, L. De Maria (Eds.), Proceedings of The 3rd International Electronic Conference on Applied Sciences, MDPI, Basel Switzerland, 2023, p. 40.
Download
Konferenzbeitrag
| Veröffentlicht
| Englisch
Autor*in
Ekinci, Burhan;
Ehrmann, Andrea
Herausgeber*in
Cennamo, Nunzio ;
Ando, Bruno ;
Spagnuolo, Gianrico ;
Sharma, Anuj K.;
Narayan, Roger ;
Arcadio, Francesco ;
Pesavento, Maria ;
Marques, Carlos ;
De Maria, Letizia
Abstract
Three-dimensional printing belongs to the emerging technologies of our time. An important aspect regarding the potential applications of 3D-printed objects is their dimensional accuracy. Especially in the case of the most often used fused deposition modeling (FDM) technique, dimensional differences between the digital model and the printed object are common and depend not only on the printer’s accuracy, but also on the printing parameters as well as the chosen material. Here, we report on the dimensional accuracy of FDM-printed objects with sharp inner or outer corners, dependent on the printing parameters. We show that different adhesion assistants lead to a variation in the dimensional accuracy and that this can be used to optimize this parameter.
Erscheinungsjahr
Titel des Konferenzbandes
Proceedings of The 3rd International Electronic Conference on Applied Sciences
Band
31
Zeitschriftennummer
1
Seite
40
Konferenz
The 3rd International Electronic Conference on Applied Sciences
Konferenzort
Online
Konferenzdatum
2022-12-01 – 2022-12-15
FH-PUB-ID
Zitieren
Ekinci, Burhan ; Ehrmann, Andrea: Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In: Cennamo, N. ; Ando, B. ; Spagnuolo, G. ; Sharma, A. K. ; Narayan, R. ; Arcadio, F. ; Pesavento, M. ; Marques, C. ; u. a. (Hrsg.): Proceedings of The 3rd International Electronic Conference on Applied Sciences, Eng. Proc.. Bd. 31. Basel Switzerland : MDPI, 2023, S. 40
Ekinci B, Ehrmann A. Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In: Cennamo N, Ando B, Spagnuolo G, et al., eds. Proceedings of The 3rd International Electronic Conference on Applied Sciences. Vol 31. Eng. Proc. Basel Switzerland: MDPI; 2023:40. doi:10.3390/ASEC2022-13811
Ekinci, B., & Ehrmann, A. (2023). Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing. In N. Cennamo, B. Ando, G. Spagnuolo, A. K. Sharma, R. Narayan, F. Arcadio, … L. De Maria (Eds.), Proceedings of The 3rd International Electronic Conference on Applied Sciences (Vol. 31, p. 40). Basel Switzerland: MDPI. https://doi.org/10.3390/ASEC2022-13811
@inproceedings{Ekinci_Ehrmann_2023, place={Basel Switzerland}, series={Eng. Proc.}, title={Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing}, volume={31}, DOI={10.3390/ASEC2022-13811}, number={1}, booktitle={Proceedings of The 3rd International Electronic Conference on Applied Sciences}, publisher={MDPI}, author={Ekinci, Burhan and Ehrmann, Andrea}, editor={Cennamo, Nunzio and Ando, Bruno and Spagnuolo, Gianrico and Sharma, Anuj K. and Narayan, Roger and Arcadio, Francesco and Pesavento, Maria and Marques, Carlos and De Maria, Letizia Editors}, year={2023}, pages={40}, collection={Eng. Proc.} }
Ekinci, Burhan, and Andrea Ehrmann. “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing.” In Proceedings of The 3rd International Electronic Conference on Applied Sciences, edited by Nunzio Cennamo, Bruno Ando, Gianrico Spagnuolo, Anuj K. Sharma, Roger Narayan, Francesco Arcadio, Maria Pesavento, Carlos Marques, and Letizia De Maria, 31:40. Eng. Proc. Basel Switzerland: MDPI, 2023. https://doi.org/10.3390/ASEC2022-13811.
B. Ekinci and A. Ehrmann, “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing,” in Proceedings of The 3rd International Electronic Conference on Applied Sciences, Online, 2023, vol. 31, no. 1, p. 40.
Ekinci, Burhan, and Andrea Ehrmann. “Influence of Printing Parameters on the Dimensional Accuracy of Concave/Convex Objects in FDM Printing.” Proceedings of The 3rd International Electronic Conference on Applied Sciences, edited by Nunzio Cennamo et al., vol. 31, no. 1, MDPI, 2023, p. 40, doi:10.3390/ASEC2022-13811.
Alle Dateien verfügbar unter der/den folgenden Lizenz(en):
Creative Commons Namensnennung 4.0 International Public License (CC-BY 4.0):
Volltext(e)
Name
_2023_Ekinci_EngProc31_40.pdf
3.78 MB
Access Level
Open Access
Zuletzt Hochgeladen
2023-02-07T07:32:05Z
Google Scholar